| |
| |
|
Product quality assurance in series production
Beneš, Ondřej ; Potanko, Andrej (referee) ; Maradová, Karla (advisor)
This master’s thesis deals with the product quality assurance in series production. Focus of the thesis is on the process of product quality planning and approval process for a part under development. The thesis addresses the issue of initial process capability study, which is one of the production part approval process requirements. Main purpose of the thesis is a statistical analysis and subsequent evaluation of encapsulated coil production process, conducted using the DMAIC methodology. Findings of the analysis confirm significant influence of the input material on the observed parameter. Based on those findings, a change to the purchased part dimensions was proposed, with assumption of moving the process location to the centre of the specification limits and thus increasing the process capability and meeting the customer requirements to the part approval.
|
| |
|
Study of implementation of SPC statistical method for control of technological operations
Ondruška, Jan ; Zeman, Karel (referee) ; Jurová, Marie (advisor)
The master’s thesis contains a procedure of implementation of statistical process control for a machining process in a chosen company. The method is based upon knowledge of this topic which are mentioned in the first part of the thesis. The output is a comparison of general process performance before and after implementation of the above-mentioned statistical method and evaluation of the influence of this new method at the process. The comparison is done using hypothesis testing of specific statistical variables and analysis of process performance and capability of both data sets. The acquired knowledge and experience will be used for implementation of statistical process control for other processes in the company’s production portfolio.
|
|
Scrap Analysis in Manufacturing Process
Buriánková, Alena ; Blecha, Petr (referee) ; Bednář, Josef (advisor)
The master’s thesis is focused on the reduction of rejection rate in production of plastic bowls with the use of statistic methods. The theoretical part of this thesis describes among others Statistical Process Control, Process capability and types regulatory diagrams. The basis for the practical part is data collection over a certain period of production, from which the percentage of the rejection rate is evaluated. Experiments and corrective actions are designed to improve the process and thereby reduce scrap.
|
|
Quality management tools
Zachová, Zuzana ; Levek, Vladimír (referee) ; Novotný, Radovan (advisor)
This bachelor thesis deals with methods, and above all with quality management tools. It consists of four parts. In the first part of the thesis is briefly presented the history of approaches to quality management. In the second part, a basic overview of the seven basic tools for quality control is elaborated and in the case of those tools, which are statistical, the procedure of their construction in Minitab is outlined. In the third part are processed advanced statistical tools with a focus on the analysis of the measurement system. In the fourth, practical part, selected methods of analysis of the measurement system are analyzed by case studies.
|
| |
|
Usage of Statistical Methods to Assure Capability of Production Process
Peroutka, Michal ; Pelánek, David (referee) ; Doubravský, Karel (advisor)
The diploma thesis deals with usage of statistical methods to assure capability of production process. The theoretical part includes the definition of quality management, basic statistical concepts and statistical process control. The practical part presents basic information about the company P & L, spol. s r. o. and analyzes the production process of selected parts. The tools of statistical process control are applied and measures to assure capability of production process are proposed.
|
|
Stability of the production process of railway base plates.
Szmek, Tomáš ; Fiala, Alois (referee) ; Koška, Petr (advisor)
The master’s thesis is focused on process monitoring using statistical process control SPC tools. It is designed as a guide for the implementation and use of control charts in the manufacturing process of the base plates, which would ultimately be conducive to improving and stabilizing the process. The theoretical parts are the basic attitudes and practices methodology of SPC, especially classical Shewhart control charts. The next section describes the current status in Strojírny Třinec, a.s. and the manufacturing process of the base plates. Followed by application of control charts for a given quality features and analysis using statistical software. Based on the evaluation are findings and recommendations for long-term monitoring of the defined quality features.
|