|
|
Prediction of cutting forces and powers when sawing with a circular saw
Skryja, Jan ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
This thesis deals with the cutting of steel thin-walled parts by slitting saw. Its subject is to study and test of cutting edges of slitting saws with a goal to reduce cutting forces to a minimum. The thesis is divided into the theoretical and practical part. In the theoretical part, existing knowledge about slitting saws and general cutting technology is analyzed. In the practical part testing of four slitting saws with different geometries of cutting edges during machining of chosen thin-walled part is performed. The performed measurements show that by the proper choice of the geometry of cutting edge, the cutting force can be reduced approximately by 30 %.
|
|
|
Unconventional production technology of chains
Hostinský, Michal ; Mrňa, Libor (referee) ; Osička, Karel (advisor)
Unconventional technologies and their continual development brings along new possibilities in the manufacturing process. The submitted project is focused on solving problems in the procession of sheet metals in the manufacture of special parts of roller and conveyor chains. In the assessment of the technology of components, laser cutting was evaluated as the most optimal technology. With this goal, there was a public tender in terms of the purchase of a new machine designed for the manufacturing operations of the company of RETEZY Vamberk. This company ranks among the most major manufacturers of conveyor, roller and special chains in Europe.
|
|
| |
|
| |
|
| |
|
|
Cutting of materials using wasteless technologies
Voráček, Martin ; Císařová, Michaela (referee) ; Podaný, Kamil (advisor)
Thesis contains literary review of wasteless metal cutting technologies. Technologies of shearing sheets, rods, bars and pipes are described, as well as laser, plasma and water jet cutting. The description of each of these methods consists of both physical principle and practical use, including examples of technological devices. Furthermore, main advantages and disadvantages of each method are discussed with regard to small batch or mass production.
|
|
|
The technology of material division with grinding operations
Rýznarová, Martina ; Kalivoda, Milan (referee) ; Prokop, Jaroslav (advisor)
This bachelor thesis deals with the technology of material division with grinding operations. The first part explains the basic principles and methods of use and advantages and disadvantages of technology of material division with grinding operations and other methods of dividing the material. The second part is focused on the characteristics of cutting tools and cutting conditions of division with grinding operations. In the last part, the measured unit machine time of the technology of material division with grinding operations and two other methods of dividing the material and wear of cutting wheels are compared.
|
|
|
Comparing roughness of cutting edges in cutting of CO2 and YbYAG laser
Podaný, Petr ; Hála, Michal (referee) ; Mrňa, Libor (advisor)
The bachelor thesis deals with the analysis of cutting edge roughness in the process of laser gas cutting using the CO2 laser and laser solid-state cutting using the Yb:YAG laser. The theoretical part is consists of a basic information on industrial lasers and a their methods which use for material cutting. There is part of describing of problems optimum settings cutting parameters and all of roughness measurement. The experimental part was measurement of 20 samples. Samples were made of structural steel DC 01 a S235JR+N, stainless steel X5CrNi18-10+2B and aluminum alloy AlMg3. In the following part is the description of materials and also laser radiation which was used to production of samples. The end of this bachelor thesis is dedicated to evaluation and place in a folder is ČSN EN ISO 9013.
|
|
|
Selection of appropriate technology for the production of welded constructions of boiler JE 12 and JE 6
Janás, Milan ; Slaný, Martin (referee) ; Dvořák, Jaromír (advisor)
The diploma thesis on the selection of appropriate technology to produce the welded construction of electric boiler JE6 / 12 aims to evaluate available production technologies and choose the most suitable of them. Choosing the technologies focuses primarily on those that are available at Slokov. Due to the connection of the welding robot to the production, it is necessary to consider the overall connection of the production and the high accuracy of the production. The individual methods of production, material separation, welding, bending and surface treatment are first theoretically analyzed and their advantages, disadvantages and parameters are summarized. Subsequently, it is practically tested individual technologies for a representative part and it evaluates the achieved parameters and economics of production. With the results obtained, the most suitable technologies are selected. With the selection of technologies, there is a need for a change in design and production parameters. Changes and modifications to the design describe another point. To achieve maximum efficiency and quality of production, a welding robot is used to make welds. The description of the production, modifications and overall design of the robot describes the next point of this work. The last part summarizes the economics of selected production technologies and details the technological process. The aim of the thesis is to design such technologies that will be advantageous from the point of view of the economy and from the perspective of the available possibilities of the company.
|
|
|
Comparison of oxy and plasma cutting
Solař, Luboš ; Hála, Michal (referee) ; Daněk, Ladislav (advisor)
This diploma thesis is focused on comparison of plasma and oxygen - acetylene cutting. A literature review of this issue is included in the work. For technological - economic evaluation, there were proposed a sample part to assess how optimal the cutting process is. Observed resulst and there comparison are stated in conclusion.
|
guest ::
