|
|
Optimization of Material Plastification Process
Šeniglová, Hana ; Krpoun, Karel (referee) ; Pantělejev, Libor (advisor)
This bachelor´s thesis deal with the optimization of the process of material plastification. The purpose of the thesis is to devise feasible parameters of a injection molding machine. The goal was achieved by the „Design of Experiments“ method. The necessary measurements were taken on the sample, a filter fuel tank, which was provided by the company Robert Bosch České Budějovice. Each measurements are described in the bachelor´s thesis. The results are summarized and evaluated in the Minitab software used for optimal parameters settings of the production process.
|
|
|
Testing of Surge Arresters
Jeřábek, Lukáš ; Paar, Martin (referee) ; Krbal, Michal (advisor)
This bachelor's thesis is devoted to metal oxide surge arresters. After historical and theoretical introduction, which explains their principles and describes their characteristical properties, analysis of the standard IEC 60099-4 and testing according to the standard with focus on the type tests follows. This chapter is also amended with review of the standard's imperfections and with its most probable future development. The work concludes with a market survey, a review of the largest manufacturers and a comparison of their products.
|
|
|
Design of manufacturing technology for motorcycle headlamp body
Nosek, Jan ; Urbanec, Antonín (referee) ; Kandus, Bohumil (advisor)
The thesis is a proposal technology of the main body of motorcycle polymer material from Bayer's APEC - high temperature polycarbonate 1703. Literary study summarizes findings from a thermoplastic injection molding technology and the possibilities of structural design of injection molds, plastic plating technology from a focus on the most important technology in the field of lighting technology vehicles. Given the anticipated production run of 50 thousand. pieces are assessed a total of 2 variants of the molding parts. The practical part was modeled and specified product designed mold. Construction was done by using SolidWorks 2007 software and normalities FCPK Bytów and HASCO. For the selected option is implemented technological calculations. For the proposed technology was chosen Allrounder injection molding machine 570 A the manufacturer Arburg designed and suitable technological process of production.
|
|
|
Production technology of plastic porter for ammunition
Hejl, Dušan ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
Dissertation deals with solution of production of set component „plastic porter for ammunition“. Component is made from high-density polyethylene with business marking LITEN ML 77, suggested series of 3 000 000 pieces. On the basis of literary study of plastics injection problems and necessary calculations, there was proposed injection form. This form is solved by means of normalised components from company Meusburger. There was chosen injection machine from company Arburg Allrounger 370 S 700 – 170.
|
|
|
Design of manufacturing technology for plastic hung
Popelka, Jan ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
The aim of my graduation theses is to work up the literature search of polymer processing. To give a short summary of their structure, characteristic and fabrication technique. Then to make a structural design of injection mold for producing the scheduled aim and motivate this design with requisite calculation for construction of the tool, a choice of injection machine and rundown of injection cycle. At the end of my work is this aim economically reviewed and compared with alternative form of structural design.
|
|
|
Production technology of plastic switch frame
Seidlman, František ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This Diploma contains theme of injection of plastics. The theoretical section is focused on polymeric materials, their dividing and characteristics. From technologies for processing plastic is chosen injection of plastic, suitable for production technology of plastic switch frame. After that follows design of injection mould including calculation and designing drawing underlaid technical economic evaluation.
|
|
|
Production of an Injection Mold.
Jílek, Bohumil ; Polzer, Aleš (referee) ; Píška, Miroslav (advisor)
This thesis is focused on a production of injection molds. It contains some analyses of the various parts of the injection molds, a description of their functions and the possibility of structural design. A summary of existing technologies for the production of these molds, their advantages and disadvantages is included. This thesis deals with design of the component parts for injection of plastics, strategy of machining and a simulation of machining.
|
|
| |
|
| |
|
|
Development of multilayer polymer floor systems
Tesař, Filip ; Vyhnánek, Miroslav (referee) ; Petránek, Vít (advisor)
Multilayer polymer flooring systems belongs to widespread materials for industrial constructions and also for public constructions. These are mostly two-components polymeric materials based on epoxy. The main aim of my thesis is to make list of requirements for multilayer polymer flooring system and utilization of waste materials as fillers in polymer epoxy. Then use this knowledge for development of multilayer polymer flooring system and propose the new recipe and primary test´s for this material.
|
guest ::
