|
|
Composite materials based on alcali activated blast furnace slag with admixture of fly ash
Indra, Ivo ; Brandštetr, Jiří (referee) ; Opravil, Tomáš (advisor)
This thesis concerns on substitution of blast furnace slag or its part with fly ash in alkali-activated systems based on aluminosilikates. Classic, fluid bottom and fluid filter fly ashes will be tested. The goal is to prepare geopolymer with required mechanical properties, but with maximal admixture of alternative raw materials. In composites with substitutioned slag or its part the thesis focuses mainly on workabilityof fresh mixture, pressure and bending strenght. Use of secondary raw materials has advantages in the economic point of view and it´s friendly to enviroment, too.
|
|
|
High-performance concretes based on the secondary raw materials
Sáček, Josef ; Brandštetr, Jiří (referee) ; Šoukal, František (advisor)
This work is devoted to study of physical-mechanical properties and structure of high performance concretes (HPC) based on portland cement. The attention is focused on possibility of substitution of economic high-cost components of concrete with utilization of secondary raw materials or cheaper components. Properties of raw materials and their influence on whole quality of concrete were tracked by various methods. Mechanical properties of prepared HPC samples were tested especially (compression and flexural strength) with further microscopic study of structure. Isoperibolic calorimetry and X-ray powder diffraction method were also used for concrete characterisation. These methods allowed to determine the influence of raw materials on prepared HPC and to carry out a certain optimization among price and quality of this material.
|
|
|
MDF composites AC-PVAl with increased moisture resistance
Repka, Martin ; Brandštetr, Jiří (referee) ; Šoukal, František (advisor)
Polymerem impregnované cementové materiály představují zajímavou a perspektivní alternativu klasických portlandských cementových past. Hlavním zástupcem těchto materiálů jsou macrodefect-free (MDF) kompozity, složené z anorganického pojiva a organického polymeru. I přes řadu vynikajících mechanických vlastností je plné zavedení MDF kompozitů na trh omezené především z důvodu jejich relativně nízké odolnosti vůči vlhkosti. Jednou z možností jak zvýšit odolnost výsledného MDF vůči vlhkosti je „in situ“ síťování polymeru. V této práci byla připravena počáteční série MDF kompozitů na bázi hlinitanového cementu a polyvinylalkoholu se třemi typy organo-titanátových síťovacích činidel (Tyzory). Efekt modifikace MDF kompozitů byl hodnocen na základě zkoušek pevnosti v tahu za ohybu po uložení materiálů v různých vlhkostních podmínkách.
|
|
|
The effect of fly ash on the properties of cement mortars.
Bayer, Petr ; Brandštetr, Jiří (referee) ; Šiler, Pavel (advisor)
The consumption of the cement for construction industries is increased every year. That is associated with greenhouse gas emissions, especially carbon dioxide CO2. Reduction of greenshouse gas emissions can be achieved by maximisation of the use of cementitious and pozzolanic by-products. As by-product could be used blast furnace slag and fly ash. My bachelor’s thesis is focused on the possibility of the partical replacement of the cement by fly ash. High temperature and fluidized fly ashes will be tested. The goal is to examine the behavior of the cement mortars in compensation of 10, 20, 40 and 60 % by weight of cement by fly ash. The compressive and flexural strength and isoperibolic calorimetry measurement were performed.
|
|
|
The Study of Aditives and Admixture Influence on High-Performance Concrete Properties
Šiler, Pavel ; Bílek, Vlastimil (referee) ; Brandštetr, Jiří (referee) ; Havlica, Jaromír (advisor)
The aim of this work was to develop the method for the determination of the superperplasticizers (SP) content in the water solution. The method developed was then applied to study the SP adsorption on the individual components used for high-performance concrete and the influence of the temperature and pH values over this adsorption. Furthermore the influence of the water to binder ratio, SP, finely grounded granulated blast furnace slag, fly ash, silica fume, finely ground silica sand and bauxite on the hydration process was studied by means of isoperibolic, isothermal and solution calorimetry. The compressive and flexural strength of most samples used in calorimetric experiments was also determined.
|
|
|
The Study of Aditives and Admixture Influence on High-Performance Concrete Properties
Šiler, Pavel ; Bílek, Vlastimil (referee) ; Brandštetr, Jiří (referee) ; Havlica, Jaromír (advisor)
The aim of this work was to develop the method for the determination of the superperplasticizers (SP) content in the water solution. The method developed was then applied to study the SP adsorption on the individual components used for high-performance concrete and the influence of the temperature and pH values over this adsorption. Furthermore the influence of the water to binder ratio, SP, finely grounded granulated blast furnace slag, fly ash, silica fume, finely ground silica sand and bauxite on the hydration process was studied by means of isoperibolic, isothermal and solution calorimetry. The compressive and flexural strength of most samples used in calorimetric experiments was also determined.
|
|
|
MDF composites AC-PVAl with increased moisture resistance
Repka, Martin ; Brandštetr, Jiří (referee) ; Šoukal, František (advisor)
Polymerem impregnované cementové materiály představují zajímavou a perspektivní alternativu klasických portlandských cementových past. Hlavním zástupcem těchto materiálů jsou macrodefect-free (MDF) kompozity, složené z anorganického pojiva a organického polymeru. I přes řadu vynikajících mechanických vlastností je plné zavedení MDF kompozitů na trh omezené především z důvodu jejich relativně nízké odolnosti vůči vlhkosti. Jednou z možností jak zvýšit odolnost výsledného MDF vůči vlhkosti je „in situ“ síťování polymeru. V této práci byla připravena počáteční série MDF kompozitů na bázi hlinitanového cementu a polyvinylalkoholu se třemi typy organo-titanátových síťovacích činidel (Tyzory). Efekt modifikace MDF kompozitů byl hodnocen na základě zkoušek pevnosti v tahu za ohybu po uložení materiálů v různých vlhkostních podmínkách.
|
|
|
Composite materials based on alcali activated blast furnace slag with admixture of fly ash
Indra, Ivo ; Brandštetr, Jiří (referee) ; Opravil, Tomáš (advisor)
This thesis concerns on substitution of blast furnace slag or its part with fly ash in alkali-activated systems based on aluminosilikates. Classic, fluid bottom and fluid filter fly ashes will be tested. The goal is to prepare geopolymer with required mechanical properties, but with maximal admixture of alternative raw materials. In composites with substitutioned slag or its part the thesis focuses mainly on workabilityof fresh mixture, pressure and bending strenght. Use of secondary raw materials has advantages in the economic point of view and it´s friendly to enviroment, too.
|
|
|
High-performance concretes based on the secondary raw materials
Sáček, Josef ; Brandštetr, Jiří (referee) ; Šoukal, František (advisor)
This work is devoted to study of physical-mechanical properties and structure of high performance concretes (HPC) based on portland cement. The attention is focused on possibility of substitution of economic high-cost components of concrete with utilization of secondary raw materials or cheaper components. Properties of raw materials and their influence on whole quality of concrete were tracked by various methods. Mechanical properties of prepared HPC samples were tested especially (compression and flexural strength) with further microscopic study of structure. Isoperibolic calorimetry and X-ray powder diffraction method were also used for concrete characterisation. These methods allowed to determine the influence of raw materials on prepared HPC and to carry out a certain optimization among price and quality of this material.
|
|
|
The effect of fly ash on the properties of cement mortars.
Bayer, Petr ; Brandštetr, Jiří (referee) ; Šiler, Pavel (advisor)
The consumption of the cement for construction industries is increased every year. That is associated with greenhouse gas emissions, especially carbon dioxide CO2. Reduction of greenshouse gas emissions can be achieved by maximisation of the use of cementitious and pozzolanic by-products. As by-product could be used blast furnace slag and fly ash. My bachelor’s thesis is focused on the possibility of the partical replacement of the cement by fly ash. High temperature and fluidized fly ashes will be tested. The goal is to examine the behavior of the cement mortars in compensation of 10, 20, 40 and 60 % by weight of cement by fly ash. The compressive and flexural strength and isoperibolic calorimetry measurement were performed.
|
guest ::
