| |
| |
|
Experimental investigation of air pressure, acoustic characteristics and vibrations of vocal folds on a complex physical model of phonation in humans.
Horáček, Jaromír ; Radolf, Vojtěch ; Bula, Vítězslav ; Veselý, Jan ; Laukkanen, A. M.
The contribution aims to provide material that can be used in development of more realistic physical as well as theoretical models of voice production. The experimental set-up, methodology and the results of measurement of airflow rate, subglottal, oral and generated acoustic air pressures are presented together with the simultaneously measured flow-induced vibrations of a vocal folds replica, made of soft silicon rubber, and recorded by a high speed camera. The data were measured during a ‘soft’ phonation just above the phonation onset, given by the phonation threshold airflow rate, and during a ‘normal’ phonation for the airflow rate of about three times higher. A model of the human vocal tract in the position for production of vowel [u:] was used and the flow resistance was raised by phonating into a glass resonance tube either in the air or having the other end of the tube submerged under water, and by phonating into a narrow straw. The results for the pressures presented in time and frequency domain are comparable with the physiological ranges and limits measured in humans for ordinary phonation and for production of vocal exercises used in voice therapy.
|
| |
|
Measurement of contact stress in a self-oscillating model of human vocal folds
Horáček, Jaromír ; Bula, Vítězslav ; Veselý, Jan ; Radolf, Vojtěch
The contribution presents in vitro measurement of contact stress in the artificial vocal folds made of a silicon rubber excited by airflow with synchronous registration of the flow induced vocal fold vibrations using a high speed camera, measurement of subglottal dynamic and mean air pressure and the generated acoustic signal. The measured maximum impact stress, maximum glottal opening and sound pressure level are compared with data found in excised larynges as well as with the values numerically simulated by the aeroelastic model of vocal fold self-oscillations.
|
| |
|
Experimental investigation of air pressure and acoustic characteristics of human voice. Part 1: Measurement in vivo
Horáček, Jaromír ; Radolf, Vojtěch ; Bula, Vítězslav ; Veselý, Jan ; Laukkanen, A. M.
This contribution is aimed to provide material that can be used to develop more realistic physical models of voice production. The experimental methodology and the results of measurement of subglottal, oral (substitute for subglottic) and acoustic air pressure (captured at a distance of 20 cm in front of the subject’s mouth) are presented. The data were measured during ordinary speech production and when the acoustic impedance and mean supraglottal resistance were raised by phonating into differently sized tubes in the air and having the other end submerged under water. The results presented in time and frequency domain show the physiological ranges and limits of the measured pressures in humans for normal and extreme phonation.
|
|
Experimentální analýza třecí vazby svazku zkroucených lopatek za rotace
Pešek, Luděk ; Půst, Ladislav ; Bula, Vítězslav ; Vaněk, František ; Cibulka, Jan
V příspěvku je prezentována experimentální analýza dvou protilehlých svazků zkroucených lopatek. Jednobodové elektromagnetické pulzní synchronní buzení sloužilo k silovému buzení rezonančního kmitání při různých otáčkových rychlostech. Síla elektromagnetu byla kalibrována pomocí dynamické váhy. Odezvy lopatek byly měřeny tenzometry umístěnými na lopatkách s kroužkovým přenosem. Po dostatečném vybuzení prvního axiálního ohybového kmitání bylo elektromagnetické buzení vypnuto a analyzováno volné dokmitávání lopatky. Dynamické chování lopatek a výsledky tlumení jsou v dobré schodě s numerickým modelem.
|
| |
|
Teplotní procesy při suchém tření
Pešek, Luděk ; Půst, Ladislav ; Cibulka, Jan ; Bula, Vítězslav
Suché tření je často užíváno pro tlumení turbinových lopatek. Tento problém je intenzivně studován v ÚT již několik let, ale nedostatečné znalosti třecích vlastností specielních materiálů silně ovlivňovalo přesnost získaných výsledků. Proto bylo navrženo a realizováno laboratorní experimentální zařízení pro přímé měření třecích vlastností a jsou prezentovány prvé výsledky. Měřena byla třecí dvojice z lopatkového materiálu s nástřikem karbidu wolframu při různém zatížení a různé frekvence relativního pohybu. Současně byla měřena teplota ve třech bodech v blízkosti třecího povrchu. Byl určován vzrůst teploty po 25s třecího procesu, koeficient tření, zmařená energie za 1 cyklus, za 1s, celková zmařená energie a mechanická energie potřebná k zvýšení teploty o 1 °C při různých podmínkách.
|