|
|
Model of the metropolitan optical network
Prudík, Jiří ; Hudcová, Lucie (referee) ; Křivák, Petr (advisor)
The purpose of this master’s thesis is foremost to provide a simple guide how to build elements of optical metropolitan area network. The basic model consists to sequence of construction, network topology, passive and active parts. The collection contains examples of alternative technology such as Wireless LAN with different frequency. The optical network construction based on optical cable, fibres, splices, trays, adapters, connectors and active parts for example a lot of media convertor models. After that there are demonstrating type of wavelength division multiplexer used in metropolitan area network – passive planar PCL splitter. One of the passive planar splitter are used to increase optical fibre channel. At the end of the collection a simplified examples of used measurements – optical time domain reflectometry and optical fibre transmission. Contains standard protocols or reflectogram. The conclusion of this thesis summarizes costs of FTTb (Fibre To The Building) model of optical metropolitan area network in Czech republic and future contribution for society.
|
|
|
Optical signal detection and maesurement of low deflections using the Michelson interferometer
Kováč, Petr ; Hudcová, Lucie (referee) ; Křivák, Petr (advisor)
The dissertation is concerned with the description and utilization of interference of two coherent optical rays. In addition, the conditions of coherence and its connections with the occurance of interference are discussed. Michelson's interferometer is used for the practical utilization of the interference effect. The possibility of measuring relatively small changes is demonstrated - deviation of piezocrystal, measurement of the coherent length of optical source and measurement of the index of refraction of tramsparent materials. The manner of optical coherent detention and its utilization in optical communication systems is indicated. After demonstration of the principle was carried out the measuring of detection of optical signal modified by the external modulator.
|
|
|
Semiconductor laser driver for 1Gbit/s
Chlachula, Filip ; Křivák, Petr (referee) ; Prokeš, Aleš (advisor)
This master´s thesis deals with a solution of the driving circuits of semiconductor laser. In the beginning of the thesis there is an analysis of semiconductor lasers and its characteristics. Then the principle of laser diodes and its excitation is described. This thesis is focused on semiconductor laser excitation through the use of direct and modulating current. Several circuits are described, designed and simulated. The best resulting circuit is realized and measured in the laboratory.
|
|
| |
|
|
Optical transmitter design
Vraspír, Marek ; Křivák, Petr (referee) ; Hudcová, Lucie (advisor)
This work dissert on proposal of optical ampifier excitor for transmission of information using optical enviroment. For proposition was chosen suitable transmission enviroment and LD diode that is used in optical communications. Accent was put at universal using of diode. Than was solved the modulation of input signal, it is used the „on-off“ keying, which is proceeded by integrated circuit, which is designed for none extreme transmission speeds. The work contains the solution of the potection of electrical circuit and LD diode against high current and thermal influences in transmitter.
|
|
| |
|
|
Possibilities of waste heat recovery from internal combustion engines
Křivák, Petr ; Pospíšil, Jiří (referee) ; Brázdil, Marian (advisor)
Increasing demands for vehicular traffic to reduce the environmental impact and consumption of fossil fuels, led an effort to increase the efficiency of the combustion process and the car as a whole. One way to achieve this is to use the waste heat of the combustion process, especially waste heat of exhaust gases. This heat can be converted into electrical energy. Consumption of electricity in modern cars is increasing. The presented work deals with the possibilities, how to using waste heat of exhaustgases from internal combustion engine. Focused on application of producing electricity. The paper analyzed the current state of car traffic, and then provides an overview of possible technological solutions using waste heat of exhaust gases. The main part is devoted to thermoelectric generators, their construction and possible design. In conclusion is made the energy balance with use thermoelectric generator.
|
|
| |
|
| |
|
| |
guest ::
