|
|
Mixed-use Building in Uherské Hradiště
Blaha, Michael ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The diploma thesis deals with the project documentation of the multifunctional house in Uherské Hradiště on plot no. 712/7 in the cadastral area of Uherské Hradiště. The building has two floors and a basement. On the ground floor there is a commercial area and a café. Office space is designed on the second floor. The building is designed as a skeleton with filling masonry, with a flat roof and is insulated with ETICS contact insulation system.
|
|
|
Boarding House Amerika
Pokorný, Patrik ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
This diploma thesis elaborates project documentation for the construction of building. The building is situated in outskirts of the town Velké Meziříčí. The boarding house for fooding and lodging with separated private zone and restaurant. Both parts connect entrance hall with reception and communication spaces. The lodging section is divided into three stories. Ground floor restaurant and salon with terrace on the second floor have south-facing oriented glazed curtain wall. That is the main part of building with stunning views on the ambient nature.
|
|
|
Apartment Building in Zámrsk
Kallab, Štěpán ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The building is located on the northern edge of the village of zámrsk. The new building of the apartment building includes 6 residential units, 4 indoor parking spaces + 6 outdoor parking spaces, one of which is reserved for persons with reduced mobility. The proposed building also solves in addition to complete equipment of residential units, technical facilities, storage space and cellars for each apartment unit. due to the size of the municipality, the scope of the proposed construction is an adequate part for increasing the residential capacity in a quiet and pleasant place. Vertically, the residential set functions as a three-storey, sub-collapsed building. The roof is designed as a flat vegetation with extensive vegetation. The building has a maximum size of 25.82 x 13.8 x 7.10 m
|
|
|
Apartment house Novosedly
Kalousová, Kamila ; Pilný, Ondřej (referee) ; Sedláková, Markéta (advisor)
The proposed building is thus a apartment building with garages, which will be located in the village of Novosedly, in South Moravia, on two plots no. 5420/83 and 5420/84. The terrain on which the object is in a slight slope. The building of the block of flats is made of brick blocks, for the above-ground part and in the underground part it is lined with lost formwork. The roof structure of the building is arched from wooden beams.
|
|
|
Civic amenities building
Plášková, Věra ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The thesis deals with the design of a two-storey L-shaped smart building for amenities with a low energy consumption concept in mind. The ground floor will be used as a café and technical facilities. The second floor is designed for a small design office. The first part of the thesis is devoted to the architectural and structural design. The selected load-bearing system is a wall system made of Silka sand-lime blocks. The floor and roof are designed of prestressed reinforced concrete panels Spiroll. Stone wool is used as the main thermal insulation. The flat roof is designed green extensive. The second part of the thesis deals with the building environment technology, which will use energy from photovoltaic panels and will be supplied with heat from a local central heat source. Air exchange is provided by two HVAC units. Cooling is designed as a VRF system with refrigerant. The third part of the thesis deals with the acoustic assessment. The main topic is optimizing the reverberation time in the open space office. For the preparation of the thesis, the Archicad and Autocad software, MS Excel and Word or Deksoft were used.
|
|
|
Mixed-use Building in Tišnov
Matoušek, Jan ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The subject of this diploma thesis is the design of a newly built mixed-use building in Tišnov, as well as elaboration a part of the project documentation for realization of the building construction. The designed building is a multifunctional building, which has the task of providing several functions. The building is situated in the South Moravian Region in the northern part of the village Tišnov, which is located about 30 kilometers away from the city of Brno. Recently, in this area new family houses and apartment buildings have been built. The building is designed as five above-ground storey, partially basement incl. a separate underground car park. The first floor serves mainly for commercial use, ie. for the provision of services and for the sale of goods. There is a coffee shop, a houseware store, hairdressers, bakers, butchers, or a gym. On the first floor there is also the main entrance to the building, and through there is further access to the upper or lower floors of the building. In the basement there is a technical background of the building and access to the underground parking. The second floor serves as office space for multipurpose use. There are apartments on the third, fourth and fifth floor, with some apartments on the 4th floor being designed as two-level maisonettes. The architectural design is based on the concept of straight lines and sharp edges, which also presents a flat roof roofing solution and receding storey with terraces. The building is detached, situated in a relatively flat terrain. All entrances to the building are designed as barrier-free. The white-blue color of the building facade alternates with the use of gray stone cladding. The roofing of the mixed-use building is solved on two levels by a single-layer extensive vegetation flat roof.
|
|
|
The Commercial-Administrative Centre in Ostrava
Vdovina, Mariia ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
This diploma thesis deals with the project documentation of a new building of a commercial-administrative center in Ostrava. The building has a partial basement, the maximum number of floors above the ground is 3. The building contains several categories of areas. The largest of them are office space and restaurant area. The total number of employees of the center is 73, including 63 administrative staff and 10 people serving the restaurant. The building also houses sanitary facilities, areas for rest, food preparation, meeting rooms, storage areas and filing cabinets, rooms for technical equipment. The building has a skeletal frame system made of monolithic concrete. Perimeter masonry and interior walls are made of Porotherm bricks. The building is covered with a general and vegetation flat roof. The facade of the building is ventilated, clad with titanium-zinc panels DEKCASSETTE and DEKLAMELLA IDEAL. The building is insulated with ETICS contact system, thermal insulation boards made of mineral felt. The diploma thesis is processed in the stage of project documentation for the construction.
|
|
|
Civic amenities building
Matulíková, Monika ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of this master thesis is to design a new building of a nursing home with private garden and car park in Kroměříž. It is a two-storey building, without basement covered with a flat green roof with solar and photovoltaic panels. The building is divided in two parts. The southern part includes residential units (10 single units and 4 double units). The ground floor of the northern part includes dining room, a kitchen, staff premises and utility room and first floor includes further staff premises. Both parts are connected by a hall with stairs and an elevator. The vertical load-bearing structures are designed from sand-lime blocks. The horizontal load-bearing structures, stairway and elevator shaft are designed from cast-in-place reinforced concrete. The envelope is insulated with mineral wool. The building will be heated and cooled with a heat pump. It will also have a mechanical ventilation system with heat and cold recovery and root zone greywater treatment plant. The thesis is carried out in Autodesk Revit 2020, Autodesk AutoCAD, Lumion and DEKSOFT software. All structures comply with the valid standards and regulations.
|
|
|
Civic amenities building
Netopilíková, Markéta ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of master‘s project is to design a new building of the office building in the cadastre area of Rohatec. The project is divided into three parts. The first part deals with the design of environment friendly and sustainable building. The second part is focused on the design of building services and the processing of building energy services. The third part is focused on the modeling of the noise study, the assessment of the soundproofing of the external cladding and the assessment of the reverberation time.
|
|
|
Boarding House Mikulov
Smolinský, Patrik ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The content of this diploma thesis is the design of a new boarding house with restaurant in Mikulov. The building has 2 above – ground floors and a partial basement. In the basement is utility room and fitness room. In 1st floor there is reception, restaurant with facilities and rooms for accomodation. One room is designed as a berrier – free. In the 2nd floor there are rooms for accomodation, facilities for cleaning and common room. The vertical supporting structures are designed from clay masonry, in the basement of the concrete formwork. The building will be covered partly by flat roof, hip roof and partly by vegetation roof. The design documentation has been prepared according to valid legal and technical regulations.
|
guest ::
