|
|
Laser vibrometer with 2D scanning system
Rajm, Martin ; Klusáček, Stanislav (referee) ; Havránek, Zdeněk (advisor)
This thesis deals in the theoretical part with the non-contact vibration measurement by single point Laser Doppler vibrometer and it concretes constructions used in practice. It deals also with the possibilities of the laser beam scanning to measure the vibrations in the plane and there are also listed suitable-commercial systems for this solution. Mentioned sweep is immediately necessary for 2D scanning vibrometer construction. In the practical part, the single-point laser vibrometer OFV-5000 was expanded by scanning galvo system, supplemented by a measuring cards for signal acquisition from the vibrometer and suitable control hardware was chosen for mentioned laser. For the resulting hardware assembly was designed and implemented in LabVIEW measurement software, to control the 2D scanning system, to set the position of the laser beam and to process and to visualize of measured vibration signals in the plane. The functionality of the developed measuring system was checked by performed measurement and visualization of the velocity vibration of restraint girder, excited by shaker.
|
|
|
Beamforming system with FPGA
Vadinský, Václav ; Vágner, Martin (referee) ; Havránek, Zdeněk (advisor)
This thesis deals with processing signals from the microphone arrays for sound source localization. Compares different types of fields, such as cross-field and circular array. It is shown here how to implement Beamforming on FPGA and design of signal processing with a microphone array.
|
|
|
Measuring system for temperature test of sensors
Turanský, Luboš ; Čejka, Miloslav (referee) ; Havránek, Zdeněk (advisor)
In this work is described design of measuring and evaluation system for temperature rise tests in cooperation with ABB company. As temperature sensors are used thermocouples type L and measuring hardware consists of chassis cRIO 9073 and measuring card NI 9213. In LabVIEW 2011 is created software for cRIO and as well for control PC and structure of both programs is described in detail. Thesis includes also practical estimation of metrological parameters of created system.
|
|
| |
|
|
Frequency measurement
Milota, Martin ; Havránek, Zdeněk (referee) ; Čejka, Miloslav (advisor)
The theme of this thesis is presentation of the CompactRIO platform by National Instruments with its range of hardware and the possibility of using this platform for the frequency measurement of analog signals. The result of this thesis is software equipment for this device focusing on the frequency measurement of analog signals and experimental verification of posibilities of a specific configuration of this platform in the range of measurable frequencies.
|
|
|
Measurement of Level by Fiber Optic Sensors
Bednář, Tomáš ; Havránek, Zdeněk (referee) ; Šedivá, Soňa (advisor)
The subject of this master‘s thesis is the issue of design of fiber optic sensor for min/max and continuous measurement of liquid level, which could be used for laboratory measurement of optoelectronics. The thesis is divided into the three parts, the first part deals with methods of retrieval level measurement using fiber optic sensors. The second part is made of plant design of optical fiber sensors, it is shown the implementation of measuring devices for liquid level measurement and measured transfer characteristics of the sensors developed. The last part is proposed for laboratory typing tasks using established preparation for teaching in the subject Optoelectronic sensors.
|
|
| |
|
| |
|
|
Measurement of conductivity of liquids
Mašláň, Stanislav ; Havránek, Zdeněk (referee) ; Beneš, Petr (advisor)
The first part of thesis is theoretical and it is the introduction into conductometry. It defines the essential terms of this field as well as contact and contactless methods of measurement of fluid conductivity and also the influential parasitic phenomena and possibilities of their elimination. The second part is dealing with design of the contactless transformer conductivity probe. The characteristics of designed probe are verified in the practical part of the thesis. The final part of the thesis is dealing with measurement according to the defined points in the assignment. The characteristics of several contact probes are verified and also the characteristic of the contactless transformer probe, which was implemented according to the design from the second part. Outcomes of these measurements establish the suitable power supply frequencies and currents for all these probes.
|
|
|
Digital microphone signal processing
Vykydal, Martin ; Macho, Tomáš (referee) ; Havránek, Zdeněk (advisor)
The aim of this work is to implement digital filters into programmable gate array. The work also includes a description of the MEMS technology, including comparisons with the technology of MEMS microphones from various manufacturers. Another part is devoted to the Sigma-delta modulation. The main section is the design and implementation of digital CIC and FIR filters for signal processing of digital microphone, including simulation and verification of properties of the proposed filter in Matlab.
|
guest ::
