|
|
Measuring Software for USB Measuring Card National Instruments
Zikmund, Jiří ; Klusáček, Stanislav (referee) ; Keprt, Jiří (advisor)
This thesis deals with measuring with USB card 6009 from National Industries company. The first part of the project deals with attributes and parameters measuring card. The second part of the project is aimed to programming environment LabView. In the third part of the project is descriptioned program to reading and generating curves, preferences and limits of this program, method of use and its options. In the last part of the project is valorization executed measures.
|
|
|
Control Software for multimeter 34410 A
Horák, Ladislav ; Čejka, Miloslav (referee) ; Keprt, Jiří (advisor)
The thesis deals with development of Control Software for multimeter 34410 A and manual for its usage. The first part of the thesis is focused on theoretical problems of individual parts of the whole measuring system. The possibilities of setting of multimeter and his communication with control section through interface are shown. Development environment LabView 7.1 is also briefly described. The second part of the thesis deals with problems of Control Software for multimeter 34410 A. The selection of measuring and its detail options are described. It is also outlined the setting of extended functions, which multimeter enables to use. The third part of the thesis deals with validation measuring according to requirements for measuring of laboratory-type power source (DIAMETRAL) in its whole range. Individual measuring were process to tables and shown in graphs. Calculations of uncertainty types A, B and total combined uncertainty are presented.
|
|
|
Control Software for RLC meter HIOKI 3532
Slovák, Martin ; Beneš, Petr (referee) ; Keprt, Jiří (advisor)
Aim of work gets up on questions and methods about measuring by RLC meter and realize control software for RLC meter HIOKI 3532. Theoretic part of work put mind to problems about impedance measuring, especially about means of their measuring. Next part deal with RLC meter HIOKI 3532 in particular to his properties, possibility of configuration and his communication by means of GPIB. Therefore next section surveys on the measuring systems, in accordance with standard GPIB. The main section is survey to control software for RLC meter HIOKI 3532 which is realize in the graphic programming language LabVIEW. The software made as an instrument to control and configuration of RLC meter parameters, which is needed to frequency response characteristic measuring and archiving. Work notes basic adumbration about software realization. And instruction for taking frequency response characteristic of measured item. Last part of the work contains from validation measure which took by the software.
|
|
|
MathScript in LabVIEW
Selinger, Michal ; Keprt, Jiří (referee) ; Čejka, Miloslav (advisor)
SELINGER, M. MathScript in LabVIEW. Brno: Brno University of Technology, The Faculty of Electrical Engineering and Communication, 2008. 92 pages. Supervisor Ing. Miloslav Čejka, CSc. The main goal of this Thesis is to examine the portability of the m-scripts between The National Instruments LabVIEW MathScript and The MathWorks MATLAB development programs. The Thesis deals with function differences execution speeds and giving overview of using The National Instruments LabVIEW MathScript programme.
|
|
|
Signal Analysis
Vávra, Pavel ; Keprt, Jiří (referee) ; Beneš, Petr (advisor)
This thesis deals with problem of analysis signal acquiring measurement of uniformity motion harmonic drive and planetary gearboxes. In introduction part are explain some features of FFT and concept of cepstrum. Further is present overview of most often measured parameters of these gearboxes and needed formulas, which express connections among particular mechanical parts of gearboxes. The next part deals with description of SW program unit generated in LabView environment, which is output product of work and makes analysis on measured courses.
|
|
|
USB modules verification
Kozina, Lubomír ; Keprt, Jiří (referee) ; Beneš, Petr (advisor)
In the bachelor´s thesis on the topic USB modules verification I was engaged in National Instruments modules, especially in module NI USB-6008. I have been using and testing this module like A/D converter. I have been using Measurement & Automation Explorer and LabVIEW 7.1 software.
|
|
|
Řádkový CCD sensor ILX511 pro fyzikální měření
Bartoněk, L. ; Keprt, Jiří
The practical use of the CCD linear image sensor ILX511 for scanning of light in some optical applications (spectroscopy) is presented. Communication of the equipment (CCD linear image sensor) with computer is realized with the help of parallel interface of a personal computer (PC) without additive interface card. The use of the linear detector is presented in the case of detection of the optical spectrum of the mercury lamp.
|
|
| |
|
| |
|
| |
guest ::
