|
|
Analýza soustav 5-ti těles s vazbami s pasivním účinkem
Podešva, Adam ; Marcián, Petr (referee) ; Fuis, Vladimír (advisor)
This work deals with the solution of systems of 5–bodies with passive effect (NNTP). Firstly, the theoretical and physical laws of statics are described and specific systems are solved. Important elements of the solution are kinematic analysis, system loosening, subsequent static analysis, equilibrium equations, their solution and analysis of results. In the first system, the influence of the passive effects and the change in the diameter of the pulley on the resulting force effects in the ropes are examined. Furthermore, in the second system, the work is extended by changing the trajectory of the movement of the body (weight) by means of an inclined plane, resulting in changes in the magnitude of the forces in the bonds. At the end of the work, the emphasis is on checking the bodies for rollover.
|
|
|
Statická analýza trojkolky
Gural, Artur ; Ševeček, Oldřich (referee) ; Fuis, Vladimír (advisor)
This thesis summarize knowlidge necessary for solving problems of statics with resistant effects. Thesis defines all important terms and explains mechanics of this kind of object interaction. The practical part deals with creating application, which should be able to solve this kind of task acording to principles, which students of statics at FME are learned. There are shown in the text several problems, which are solved using created program. These should present studied problematics. Thesis and program are intended to deepen knowledge of solving statics problems.
|
|
|
Stress-strain analysis of a sclerotic artery during angioplasty
Trtík, Adam ; Fuis, Vladimír (referee) ; Burša, Jiří (advisor)
This bachelor thesis focuses on an analytical calculation of maximum stress and deformation in arterial wall suffering from atherosclerosis during angioplasty and compares this value to the stress in wall of both healthy and sclerotic artery loaded by normal systolic pressure. Finally, the results are compared with corresponding model using the finite element method. In the theoretical part, the histology of arteries, their biomechanical properties and pathogenesis of atherosclerosis itself are briefly described.
|
|
|
Optimization of sliding gate profiles
Gajdůšek, Tomáš ; Profant, Tomáš (referee) ; Fuis, Vladimír (advisor)
This thesis deals with stress and strain analysis of real self-supporting sliding gate produced by company Technopark CZ. s.r.o. In the first part of work is analyzed theory, which is used for calculations. In computational part is created model of self-supporting sliding gate and then analytically solves deformations and stresses in this model. The analytical solution is verified by the numerical solution in Ansys. At the end of the thesis are evaluated the knowledge and created the optimal dimensioning of the profiles.
|
|
|
Strain-stress analysis of fixed bone of foot
Zapletal, Jakub ; Fuis, Vladimír (referee) ; Návrat, Tomáš (advisor)
This diploma thesis deals with analysis of the rigidity of different variations of foot fixations. In the thesis there is a description of elementary anatomy of foot and its patology. Furthermore the possible corrections of hallux deformities and chosen fixators are described. The problem of analysis is soluted by the method of finite elements. The thesis also includes steps of geometery model creation based on 3D scanning. Three differents types of fixations are compared in this thesis and each of them is created in two different levels of details. There is a comparation, analysis of final solutions and chosen influences on the rigidity in the conclusion.
|
|
|
Finding kinematic quantities of a mechanism and a structural analysis of its members after blockage
Zvozil, Ondrej ; Vosynek, Petr (referee) ; Fuis, Vladimír (advisor)
Diplomová práca, ktorá vznikla v spolupráci so spoločnosťou AUFEER DESIGN (AFD), sa zaoberá analýzou konkrétneho stieračového mechanizmu automobilu. Najprv je uvedená stručná história stieračov. Stieracie sústavy sú potom rozdelené podľa ich usporiadania a spôsobu pohonu. V nasledujúcej kapitole je formulovaná problémová situácia, problém a systém podstatných veličín. Kinematické veličiny kľúčových bodov mechanizmu sú určené analytickým aj numerickým prístupom. Výpočtový model pre kinematickú analýzu je vyvinutý v Matlabe a SimMechanics. Ďalšia časť je venovaná vytváraniu konečno-prvkového modelu v programe ANSA. Všetky deformačne-napäťové analýzy sú vykonané v programe Abaqus. Prvá z nich je parametrická štúdia, ktorá odhaľuje kritické polohy mechanizmu z hľadiska tlakového namáhania určitých súčastí. Mechanizmus v kritických polohách je potom zaťažovaný so zablokovanými ramenami stieračov. Nakoniec sú urobené lineárne analýzy straty vzpernej stability súčastí, u ktorých môže nastať, nasledované nelineárnymi analýzami so zahrnutými imperfekciami.
|
|
|
Failure probability of the ceramics part using Weibull weakest link theory
Kovář, Jaroslav ; Návrat, Tomáš (referee) ; Fuis, Vladimír (advisor)
This thesis compares Weibull weakest link theory with inclusion of one and all three principal stresses. Principal stresses needed for this theory were calculated with finite element method. The informational research is in the introduction of this thesis. It includes ceramic materials, Weibull weakest link theory, Gaussian quadrature over spherical surface and ceramic head of hip joint endoprothesis. Theoretical part is used for next calculations of probability of failure. The probability of failure of ceramic rod loaded by four-point bending is calculated in first calculations. This task is solved as contact in the next step. Next part of this thesis is about selection of suitable method of numerical integration. This method will be used in the calculation with all three principal stresses. The results of calculation with all three principal stresses are compared with the results of the calculation which includes only first principal stress. Firstly, this is done for cylindrical body and then used on head of hip joint endoprothesis. In the last part of this thesis, probability of fracture of head hip joint endoprothesis with shape deviation of nominal conicity is calculated.
|
|
|
Stress - strain analysis of total hip replacement - type Mayo
Rýdel, Jiří ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma thesis deals with hip endoprothesis, primarily with endoprothesis conservative Mayo. A part of this paper considers a study aimed at an anatomy, types and modern trends in endoprothetic. On the basis of this study, gained CT data and the help of systems Ansys Workbench, Rhino Ceros and Catia there was made a model of proximal part of femur and TEP Conservative Mayo. A computational model was build up afterwards, which was used for a stress-train analysis.
|
|
|
Stress - strain analysis of jaw with tooth implant type MTI
Petrlíková, Helena ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma work is oriented on the deformation and load stress analysis of the jawbone with the razor-blade dental implant of the company MTI. There is a literature search on this theme in the beginning of this work. Deformation and tenseness of the system is done by computerized method FEM. There is detailed description of creating the computational model in this work. The geometry model of the system was created in the 3D CAD design software SolidWorks. Discretization, model of constrains and load sets including own solution was created in the ANSYS Workbench. On the basis of solutions with different load sets, which are presented in this work, is created a deformation and load stress analysis for two razorblade implant of copany MTI.
|
|
|
Stress - strain analysis of inferios limb with fixator type Poldi 7
Pásek, Jiří ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma thesis deals with stress-strain analysis of inferious limb fixator type Poldi VII and tibia, whereupon is applied. In work is discribed creation of a geometry model of fixator and tibia, her discretization, loading and solving. Tibia was load by torsional moment and his magnitude was 10Nm. Then was perform a numerical solution in FEM system ANSYS Workbench 11.0. Further was effect biomechanical study about osification of broken part. Tibia was load by force, which evokes upright standing on both limbs.
|
guest ::
