|
| |
|
|
Technological design of part "hydraulic cylinder"
Cejpek, Petr ; Slaný, Martin (referee) ; Kalivoda, Milan (advisor)
The subject of this bachelor thesis is the analysis of technological process of manufacturing of the part called hydraulic cylinder in conditions of company S&K TOOLS spol. s r. o. There is an analysis of the present technological process in the beginning of the thesis. The main goal of this task is to find weak spots of manufacturing, create an improvement proposals and realization of practical experiment in concrete conditions of the company. Last part of the thesis is focused on realization of technical and economical evaluation.
|
|
|
Cutting of Water Jet
Zouhar, Ondřej ; Slaný, Martin (referee) ; Osička, Karel (advisor)
The work developed in the master's program, describes the technology of water jet cutting. The theoretical part deals with the description of this technology and it explains the basic concepts used in this field. The practical part was designed to verify some theoretical knowledge. Therefore, several experiments were performed, while there was studied the influence of abrasives on the final quality of the surface and the level of the generated noise. The practical part was completed by the production of the selected component and its technical and economic evaluation.
|
|
|
Workplace design for machining of motor shafts
Knobloch, Martin ; Slaný, Martin (referee) ; Píška, Miroslav (advisor)
The main goal of this bachelor’s thesis „Workplace design for machining of motor shafts“ is setting a new technology of machining shafts in the Siemens s.r.o., o.z. Elektromotory Mohelnice. At the beginning a theory of production preparation is described and the nowadays methods of production. In the next part of the work the present production and evaluations of most critical spots are described. Two proposals of the new workplace are offered. In the end of bachelor work the economical aspects of the new workplace are considered.
|
|
|
On The Analyse of High Productive Reaming Technology
Gashkova, Irina ; Slaný, Martin (referee) ; Píška, Miroslav (advisor)
Diplomová práce se zabývá analýzou technologie vysoceproduktivního vystružování. V rámci práce byly provedeny testy vystružování za různých technologických podmínek (vc=40, 60, 80, 100 m/min; f=0.2, 0.4, 0.6, 0.8 mm) na materiálu austenitické oceli DIN 1.4404 při použití vystružovací hlavicí MT3. Jednotlivé operace vystružování byly porovnány z hlediska parametrů jako tlačná síla, krouticí moment, výsledná drsnost obrobeného povrchu a dále z hlediska tvaru třísky. Následně byly vypočítány průměrné hodnoty a směrodatná odchylka naměřených parametrů. Dále bylo provedeno porovnání pomocí diagramů. Výsledky ukazují lepší kvalitu, nižší drsnost povrchu (Ra 0,37 µm) a méně zdeformovanou třísku při pomalejších řezných rychlostech (40 m/min) a menším posuvu na otáčku (0,2 mm). Výsledky také ukazují nárůst tlačné síly a krouticího momentu za uvedených technologických podmínek. Při zvyšující se řezné rychlosti vystružování tyto silové účinky klesají.
|
|
| |
|
|
Design and realization of CO2 laser with power up to 100W
Šrenk, Jakub ; Dvořák, Jaromír (referee) ; Slaný, Martin (advisor)
This work is focused on the problematics of small CO2 lasers and their possible use for commercial production. The first part describes devices available on the market and evaluation of their parameters. The practical part specifies the parameters that arise from the potential use of technology. Based on these parameters, design of the machine and its complete mechanical design are elaborated. Furthermore, the experimental part deals with the design of structural components, control system, electrical systems and in general a complex technical-technological solution of the equipment, including economic evaluation of the design. Part of the work is also the construction of the machine itself, including activation, adjustment and debugging for the considered production. The constructed machine was subject to testing to ensure required quality of production.
|
|
|
Surface treatment of ABS parts after FDM 3D print
Světlík, David ; Slaný, Martin (referee) ; Zemčík, Oskar (advisor)
This master thesis deals with the surface treatment of parts made of plastic produced using FDM technology and design of technological device for surface treatment. The thesis describes FDM principles, according to performed experiments in a technological device there are suggested technological conditions for the surface treatment of parts made of ABS plastic. In the end of the thesis, there are calculated costs of the technological device and its operating costs, also mechanical properties, surface roughness and other specifications from before and after the treatment are compared.
|
|
|
Use of Unconventional Method WJM in Condition a Small Firm
Masařík, Adam ; Slaný, Martin (referee) ; Kalivoda, Milan (advisor)
This bachelor thesis is focused on the possibility of using the technology of water jet for stack cutting. The theoretical part deals with two types of water jets used for cutting materials and their appropriate and inappropriate application. It also includes a description of basic elements of a water jet cutting machine. In the practical part of this thesis a few samples of a component are made by abrasive water jet stack cutting. The impact of this cutting method on production costs and cutting quality is assessed afterwards.
|
|
|
The use of thermovision technology in output control of power supplies
Rejžek, Jan ; Slaný, Martin (referee) ; Polzer, Aleš (advisor)
The aim of the thesis is to clarify the issue of non-contact surface temperature measurement with a focus on the thermal imaging cameras as a modern representative of pyrometers and thermovision technology used in the output control of power supply. To obtain the corresponding results of temperature control, it is necessary to know the exact values of emissivity of the measured materials. The experimental part of this thesis is focused on detection of emissivity of power supply parts.
|
guest ::
