|
| |
|
|
Plastic materials and their treatment
Kopečný, Aleš ; Zemčík, Oskar (referee) ; Osička, Karel (advisor)
This research the basic empirical knowledge about the processing of plastic materials. The following are analyzes of the nature of plastic materials and analysis of the use of these materials in the engineering industry. This paper deals with the technological methods of processing plastics. Specifically, it is done as a summary of information about the technologies needed for the production of molds for plastics. Key words
|
|
|
Production Concept of Special Machining Device for Making of T-Channel Detail
Opršál, Radek ; Osička, Karel (referee) ; Sedlák, Josef (advisor)
The objective of this diploma thesis was the design of a special machine tool that increases the efficiency of the production of a T-slot detail on the part of the clamp body. The thesis deals with the current production of this component as well as the description of the material, the machines that are used and the technological process. The next part focuses on the description of the new special machine tool, its production, heat treatment and the presentation of used indexable inserts. Another part analyses the production innovation that was comprised of the comparison with the former machine tool to the new one. The thesis concludes with a technical and economical evaluation of the former and innovated production.
|
|
|
Material of electrodes for electrical discharge machining
Bednář, Šimon ; Chladil, Josef (referee) ; Osička, Karel (advisor)
Diplomová práce se zabývá problematikou volby grafitového materiálu využívaného pro výrobu nástrojových elektrod při elektroerozivní obrábění. Práce je rozdělena do třech částí. Teoretická rešerše nekonvenční technologie elektroerozivního obrábění vypracovaná dle uvedených zdrojů se nachází v první části práce. Dále je v práci proveden cenový průzkum EDM grafitových materiálů nabízených v České republice a na Slovensku. Čtyři odlišné stupně kvality grafitu (od stávajícího dodavatele firmy GAMARTIS TRADE s.r.o.) a jeden měděný materiál byly podrobeny experimentu, jehož účelem bylo zjištění závislosti mezi kvalitou grafitového materiálu (cena) a přesností vyhloubené kavity, opotřebením nástrojové elektrody, časem obrábění nebo také drsností povrchu.
|
|
|
Welding with laser machines
Hanáková, Anna ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
This bachelor thesis is focused on the usage of laser beam and laser beam machines in engineering. It will be mainly focused on laser beam welding (LBW). History of laser, its development and principal are all described in the opening part of this bachelor theses. Types of lasers and its use are also included. Next part is focused on laser welding itself. Thus, welding methods, parameters entering the process and advantages/disadvantages of this technology are introduced. The last theoretical part includes material tests of welded joint and outputs of those tests. In the experimental part the process of laser welding itself is presented and the results of tensile test are described.
|
|
| |
|
|
Analysis of the surface after laser cutting
Narovec, David ; Sedlák, Josef (referee) ; Osička, Karel (advisor)
This diploma thesis discusses laser cutting and the consecutive surface treatment of cut parts. The theory of laser cutting is described in the first part of this thesis, including laser history and the laser emergence principle. Cut parameters and the influence of the laser cutting on the material are described later on. The next part describes the laser cutting technological possibilities and other laser technology utilization options are outlined. In the last theory part, metal surface treatment used in the experiment is covered. Coating thickness is evaluated in the practical part of this thesis, as well as roughness, microhardness, chemical microanalysis and metalography. The evaluation of the results achieved, and optimal surface treatment execution suggestions are addressed in the last part of this thesis.
|
|
|
Automation of cam shaft production
Matějka, Petr ; Prokop, Jaroslav (referee) ; Osička, Karel (advisor)
This thesis is intended on modernizing of grinding operations in production cam shafts of injection pump. Existing technology, mainly special-purpose machines, will be replaced by modern CNC grinding machine. Further modernization will take place in the area of measurement, where existing measuring instruments cannot measure profile of cams. There will be used the new measuring machine, which will manage to measure necessary dimensions and tolerances.
|
|
|
Technology of Production Parts solar Panels
Midrla, Zdeněk ; Sedlák, Josef (referee) ; Osička, Karel (advisor)
This work is focused on a proposal of technological production process of components of a solar panel. The proposal of technological production process is suggested in terms production series of 9000 of pieces per year. The work also contains an analysis of construction of all components of the air separator equipment. There are suggested variants of stocks for some of the components. It also includes a selection of the most favourable variant in terms of material usability and practical aspect as well. There is an technological production process designed by the chosen varinat including of a production instructions.
|
|
|
Implementation of laser technology
Urban, Jan ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
The aim of this thesis is to describe the replacement of wire cutting laser cutting for cutting inserts made of hard material. Description of current situation in the company Vydona, tender and choice of laser and the need for post-laser workshop. The next section deals with the cutting of a particular sample. The last part of the technical economic assessment are calculated hourly rates of machines and the time and cost loads of different cutting inserts.
|
guest ::
