|
| |
|
|
Tool life of ADMX inserts for milling of the S-grade materials
Tejkl, Jakub ; Kouřil, Miroslav (referee) ; Píška, Miroslav (advisor)
This diploma thesis studies the machining of group S materials. In the theoretical part of this thesis these materials were divided into groups and subsequently analyzed. These materials were also analyzed in terms of their impaired machinability. In the practical part of this thesis experimental tests were conducted to determine tool life, tool wear and in the case of testing titanium alloy surface roughness too.
|
|
|
Possibilities of minimalization of induced drag
Skarolek, Vilém ; Kouřil, Martin (referee) ; Lajza, Ondřej (advisor)
Lift-induced drag is a significant part of total drag of airplane during flight, thus its minimization is desirable for economical operation of air service. This bachelor thesis deals with possibilities of induced drag minimization. First part of this thesis presents basics of induced drag origin during flight. The second part of the thesis contains overview of potential methods of induced drag minimization, their description and structural design, including comparison of particular methods of drag minimization.
|
|
|
The simulation of steel rod improvement by the induction lines heat treatment
Chmiel, David ; Turoň, Rostislav (referee) ; Kouřil, Miloslav (advisor)
Bachelor thesis deals with possibilities of simulation of induction heat treatment. Literary analysis is focused on the method of induction treatment, the physical nature and its use for the heat treatment. For completeness is in the end comparison of different methods of heat treatment. The experimental part describes the future of quenching and tempering of steel bars in company Třinecké železárny a.s. Also is contained method of simulation of the heat treatment in computer program QTSteel and the subsequent design of parameters for a continuous processing.
|
|
|
Surface treatment of selected steels using electron beam
Matlák, Jiří ; Jan, Vít (referee) ; Kouřil, Miloslav (advisor)
The aim of diploma thesis was preparation of hardened layer on three chosen types of materials with different alloying components content without surface melt by using electron beam technology. The influence of chosen process parameters was observed on the prepared hardened layers properties and shapes. In the first part of bibliographic search there are described electron beam properties, possibilities of his influencing and control. There is given example of complete set of electron beam are mentioned in the second part of theoretical research.
|
|
| |
|
| |
|
|
Web Pages Design
Kouřil, Martin ; Herold, Miroslav (referee) ; Koch, Miloš (advisor)
Content of my Bachelor‘s thesis is to create a complex website for the MB Kontejner s.r.o. company. The goal of the internet pages is to make the company visible on the internet and to serve as a potencial source of information for the customer. The part of this task will be a complete creation of this web site and also putting it on the web and domain creation.
|
|
|
determination of kinetic parameter of reactions using DSC
Kopecký, Jan ; Kouřil, Miloslav (referee) ; Jan, Vít (advisor)
The master thesis deals with DSC measurments a calculation of kinetic parameters. In the theoretical part, iron alotropy is briefly described, followed by a description of the DSC analysis itself. The thesis also includes division and derivation of isoconversional methods for calculating the activation energy. In the experimental part, a series of measurments is perfomed on pure iron prepared by Cold Spray method. In the paper the influence of deformation on the Curie temperature of the magnetic transformation in -Fe and transformation > is investigated. The activation energy is calculated for transformation > for different degrees of deformation. The degree of deformation is monitored by channeling contrast.
|
|
|
Low Temperature and Cryogenic Treatment of Casehardened Parts
Bílková, Lenka ; Juliš, Martin (referee) ; Kouřil, Miloslav (advisor)
This work deals with the assessment of the influence of low-temperature treatment on the structure and properties of casehardened surface layer of parts. The objective was to assess whether low-temperature treatment is sufficient, insufficient, or unnecessary for the given purpose. Gears which form a part of Zetor tractors gear boxes were used as samples. Thirteen pairs of frozen and non-frozen samples were used; they were taken from production batches throughout 2007, their hardness was assessed and furthermore, the experiment itself, freezing casehardened and hardened samples to different temperatures reaching as low as -196°C, was carried out. A moderate increase in hardness was registered with the majority of the frozen samples, which proved the effectiveness of the low-temperature treatment.
|
guest ::
