|
|
Load Flow Calculation and Design of Distance Protection Relay Settings of 110 kV Overhead Line
Jasenský, Filip ; Vaculík, Petr (referee) ; Toman, Petr (advisor)
Bachelor thesis load flow calculation and design of distance protection relay settings of 110 kV overhead line acquaints with the theory calculation of steady operation, short-circuit conditions and a proposal setting the distance protection. The theoretical part is made an example of a simple calculation to show leadership methods of calculation. The practical part is a calculation of steady operation and short-circuit conditions. Short-circuit ratios are calculated for a single operation and parallel operation of transformers in Otrokovice. Calculated using the initial shock symmetrical output from the calculation of short-circuit conditions is verified by short circuit resistance of substations. The practical section setting the distance protection ABB REL 316*4 and compensation earth faults. Calculation of steady state and short-circuit conditions designed basic operational state of the network, for which the design of a distance protection relay settings.
|
|
| |
|
|
Calculation of short circuit currents in electtrical network
Reiter, Martin ; Vaculík, Petr (referee) ; Toman, Petr (advisor)
First chapters of my bachelor´s thesis are focused on failures of networks, simple characteristics and description of their potential danger. Next chapters are thoroughly focused on the short-circuit, on the short-circuits graphs, on the circumstances which caused them and on their calculation. Next part is about the example, which is counted by the IEC 60909. First example is simple network. Second example is real distribution network 110kV. We are going to cogitate two involves for the real network and we are going to calculate symmetrical and asymmetrical short circuit current. There is summary of knowledge about the short-circuits and evaluation of the real distribution network at the end of my thesis.
|
|
|
Plan of grid connection for small hydroelectric power plant
Miškovský, Ján ; Wasserbauer, Vojtěch (referee) ; Radil, Lukáš (advisor)
The purpose of the thesis is a plan of grid connection for a small hydroelectric power plant in Rastak. The introduction briefly analyses the scheme, MVE, description of the particular constructive parts and specified technical equipment as well. The main goals of the study were choice of suitable transformer, the proper VN substation as well as a plan of overhead power lines. Particular attention was paid to: figuring the short circuit current and mechanical strain, the best choice of electric field VN substation for MVE, the transformer connection in the point VN substation and geometrical measurement of its power line with 35 kV voltage summing up, it can be concluded that above mentioned is crucial to cooling of the transformer in Raštak.
|
|
|
Power supply of electrostatic separator
Broďák, Kamil ; Pazdera, Ivo (referee) ; Huták, Petr (advisor)
The diploma thesis focuses on the problems of electric power precipitators. Due to their current dominant position, the work concentrates on the sources of single phase transformers operating at the frequency of 50 Hz controlled by thyristors. The first part describes the electrostatic precipitator and its principle. This is followed by a brief insight into the proposal for an electrostatic precipitator. The work also explains the high voltage source that is divided into a transformer with a rectifier and into a control box with power circuits and control circuits that provide the power supplied by a transformer. The work also offers an explanation of the HV source system that operates at different conditions. The last part suggests a proposal for cooling cabinet including thyristors, for power line control box resources, for a supply line and a line to the transformer.
|
|
|
Calculation of HV line distance relay setings
Pustowka, Pavel ; Vaculík, Petr (referee) ; Toman, Petr (advisor)
This work is divided into practical and theoretical part. The first part deals with defective states on ehv lines, especially short-circuits and their calculation, further discusses about distance protections and the theory necessary for their correct adjustment. The second part contains practical calculation of short-circuit conditions and adjustment for distance protection on selected part of 110 kV network, belonging to EO.N company. The result of the work are values needed for adjustment all distance protection in entered part of the network.
|
|
|
Short-circuit Calculation of Local Distribution Network
Byrtus, Jiří ; Paar, Martin (referee) ; Topolánek, David (advisor)
This thesis deals with transient phenomena in the electricity grid - especially with short-circuits. First part describes short-circuit types, reasons for their commencement and also consequences of their functioning. The thesis further shows waveforms of short-circuit currents and its components. A method of calculating short-circuits currents, using the constituent systems and the basic equations for calculating short-circuit impedances are also mentioned here. Relations and methods are based on valid standards of IEC 60909 – 0. The second part indicates the calculation of two-phase and three-phase short-circuit currents for specific network of industrial building. This calculation aims to verify the dimensioning of substations for short-circuit currents after connecting a synchronous generator with given power to the main substation.
|
|
|
Calculation of distance protection relay setting for 110kV line.
Bartoš, Petr ; Vaculík, Petr (referee) ; Toman, Petr (advisor)
This work deals with both the calculation of short circuit conditions of 110 kV network in the Czech Republic. This network is divided into two parts, each of which feeds a 400/110 kV substation and the calculation is performed for different locations of a short circuit. The second part deals with the calculation of distance protection settings for one part of this network. The result of this work are the values of network parameters needed to set up distance protection, which protects our individual lines of the network.
|
|
|
Short Circuit Currents in DC Systems
Kolařík, Robin ; Geschwinder, Lukáš (referee) ; Paar, Martin (advisor)
The bachelor thesis deals with the analysis of short-circuit currents in DC systems. The thesis introduces the possibility of application of low voltage DC distribution in commercial and industrial buildings. The second part is focused to high voltage direct current transmission. The practical part deals with the calculation of short-circuit currents of individual elements and subsequently with short-circuit conditions in the DC network. At the end of the work are evaluated advantages and disadvantages between AC and DC voltage and suitability of use in given areas.
|
|
|
Short Circuit Currents in DC Systems
Kolařík, Robin ; Geschwinder, Lukáš (referee) ; Paar, Martin (advisor)
The bachelor thesis deals with the analysis of short-circuit currents in DC systems. The thesis introduces the possibility of application of low voltage DC distribution in commercial and industrial buildings. The second part is focused to high voltage direct current transmission. The practical part deals with the calculation of short-circuit currents of individual elements and subsequently with short-circuit conditions in the DC network. At the end of the work are evaluated advantages and disadvantages between AC and DC voltage and suitability of use in given areas.
|
guest ::
