|
|
Schindler`s Factory
Duga, Libor ; Zajícová, Jaroslava (referee) ; Mléčka, Jan (advisor)
The revitalization of the abandoned industrial complex in the middle of Brněnec (Brünlitz) village. Spaces of the area could become a lively centre not only of the community, but also of our national contemporary history in one place, the place with a powerful story of more than 1100 saved human lives from the Holocaust in the Schindler`s factory – the sub-camp of the concentration camp Gross-Rosen.
|
|
|
reconstruction of factories
Hnízdilová, Aneta Aya ; Mátl,, Miroslav (referee) ; Moudrý, Ivan (advisor)
The thesis deals with the reconstruction of the existing factory building, which has long been unused - so-called brownfield, for housing and commercial use. On the first above-ground floor, offices will be reconstructed after the reconstruction, with 4 residential units on the second floor.
|
|
|
Tomioka Mill
Šnyrch, Marek ; Zemánek, Václav (referee) ; Zemánková, Helena (advisor)
The supervising teacher of the Thesis chose two bulidings to be the subject of solution, which were used as warehouses of cocoons. These are the biggest buildings of the premises as for the volume, which stand out for their impressing construction and their area (1493,1 & 1486,6 m2). The distance between them is aprox. 125 m. The systém of construction is the same in both the buildings, it is a wooden timber reinforced brick masonry frame in modular size of 3,6 x 6,15 m. The constructive height of street floor of building A is 4,4 m, building B 3,85 m. The clearence of bulinding A is 3,85 m and for building B 3,27m. The clearance of second floor in both objects is 4,84m. The existing inner staircase has one arm and is of 54 cm in width. There is a cargo lift on its … covered by … for the connecting the floor areas. … … of both the building forms together with wooden pillars elements also … . The windows of 160 cm width are set rytmicaly in three consecutive rows, they ensure max lighting of the interior of the buildings. The roofing of the buildings is made from wooden frame structure and covered by tiles. The roof construction is not covered from bottom and therefor they make an impression of one of the most striking elements in the interior. The clean dispositions, the lenght of the halls of 104 m to the adequate width, the clean construction both the brick and the wooden ones, together with impressive lighting, the all form an enormous value resulting in a unique character as a whole.
|
|
|
TRANSFORMATION OF THE POST-INDUSTRIAL AREA OF MODETA JIHLAVA
Záděrová, Lucie ; Růžička, Tomáš (referee) ; Havliš, Karel (advisor)
The subject of this bachelor thesis is an urban and architectural study of the transformation of the post-industrial area of Modeta Jihlava into a multifunctional complex in close proximity to the Jihlava Zoo and in connection with the city center. The aim of the urban study is to find a suitable use of the building located in the town of Jihlava. The urban study focuses on integrating the complex into the city's structure, making it more accessible and creating new links between the city and the post-industrial area. The architectural study focuses on defining the new building program of the Modeta for a multifunctional social center for visitors to Jihlava, but also for local residents. Reconstruction respects the character of the complex, using simple materials such as glass, concrete and metal.
|
|
|
Manufacture of aquariums
Lebedev, Ilya ; Myslín,, Jiří (referee) ; Boleslavská, Yvona (advisor) ; Brzoň, Roman (advisor)
The bachelor thesis deals with documentation for obtaining a building permit approval and documentation for building aquarium factory. The work is based on earlier created study of the subject AG033. Bukovany is a village in Hodonín district in the South Moravian Region of the Czech Republic. This plot is almost near the eastern border of the village. The land is sloping, relatively narrow and long. The shape of the estate greatly influenced the location of the building and the connection to the existing roads. There is good availability for supply and shipping. The factory is divided into four above-ground interconnected buildings with different functions. All objects are without basement and have only one floor. On the southern side of the plot is located a representative administrative part of the building, which surrounds the main factory building. It is possible to drive into the main production hall by a truck and to handle large and heavy glass panes by means of a bridge crane. The manufacturing process of gluing has high demands on the illumination of the premises, therefore it is illuminated by the Lightway Maximus roof skylights and the windows around the perimeter of the hall. This production hall is directly connected to the warehouse and joinery space. The construction system of the production objects is prefabricated, based on monolithic nibs. The part of the building, which serves as a warehouse has a brick walls. The eastern and most sloping part of the plot is filled with greenery. There is an artificial small lake in front of the administrative part of the building.
|
|
|
TRANSFORMATION OF THE POST-INDUSTRIAL AREA OF MODETA JIHLAVA
Pešková, Jitka ; Růžička, Tomáš (referee) ; Havliš, Karel (advisor)
The subject of this bachelor thesis is an urban and architectural study on the transformation of the post-industrial area Modeta in Jihlava. The layout reflects the close proximity of the factory to the Jihlava zoo and the needs of the city as the owner of the building. The complex is multifunctional and reconstruction disturb expressive character of buildings and existing structures.
|
|
|
The Museum of the Textile Industry in Brno
Lužný, Jiří ; Zemánek, Václav (referee) ; Zemánková, Helena (advisor)
The diploma thesis task: The aim of this diploma thesis is the design proposal of the Museum's textile industry of the former Vlněna factory on Přízová street in Brno. Textile industry was the engine of Brno development in the period of industrialization. Brno is often called the Moravian Manchester. In this English city it is visible found how much attention is devoted to the history of this industrial heritage and inspiration can be found for the design of Technology Museum. This thesis will build on the work in the preceding semester focused on urban-architectural solution of a city block with a former textile factory, in context with development of the South Center of Brno.
|
|
|
ZBROJOVKA FACTORY BRNO
Staffová, Eva ; Kristiánová,, Katarína (referee) ; Havliš, Karel (advisor)
Master thesis is developing a realistic strategy for regeneration and development of the post-industrial factory complex Zbrojovka Brno. Theme of thesis is to involve inaccessible area back into city life. Zbrojovka is not a typical brownfield area. Production was stopped in 2006 and the area is surprisingly full of life today, roughly 50 % of the land is used, leased objects are conserved and not decay. The main theme is transformation of the factory environment into a viable multi-functional urban area using the principles of sustainable urbanism. Compared to the developer plan this proposal maintain existing structures for further development. Zbrojovka factory is a place with unique atmosphere, with genius loci, which is worth preserving. The proposal uses the newly created public spaces as a catalyst for development and aims to attract “creative class“ that could Zbrojovka get into wider public awareness and attract the necessary investment for creation a lively part of the city with an industrial soul.
|
|
|
Engineering Process Optimization
Pluskal, Jaroslav ; Hrabec, Dušan (referee) ; Popela, Pavel (advisor)
This bachelor's thesis deals with optimization with emphasis on Newsvendor model and its usage. An overview of basic terms and theory related to probability, mathematical analysis and optimization is mentioned at the beginning. The main aim of this thesis is to formulate a Newsvendor problem in its basic form and then demonstrate the impact of various demand distributions. After that the gained knowledge is used to solve a project of factory, for which we want to set optimal parameters. Software GAMS is used to model and solve the project.
|
|
|
Production buildings, Production of aquariums in Brno
Chytilová, Markéta ; Maar, Radek (referee) ; Boleslavská, Yvona (advisor) ; Bečkovský, David (advisor)
To commence, the main theme of this paper was to design a newly built manufacture of the Aquarium Pavlica Company. This business is specialized in the production of aquariums, which are designed for the interiors of homes and general public buildings. The main foundation for the project is an architectural study paper which was done in modules AG035 - Architectonics Studio and AG036 - The Complex Project. The design of the object is situated in a slightly slopping land in Brno, Horní Heršpice, Sokolova Street. Currently, the land is registered as a brownfield by Brno City Municipality. There is one small building on the land, which is planned to be demolished. The entrance to the site is located to the North Side - from the main road. In addition to this, the entrance is barrier free and easy to access. The front side of the designed object is parallel with the road on Sokolova Street. The main requirement was to create a convenient setting for the manufacture along with the social administrative facilities. As well as that, the requirement was to create space for a permanent exposition. The designed manufacturing object is divided into numerous separate parts. The building consists of an entryway, permanent exhibition, convenient facilities for visitors as well as facilities for the employees, which are all located on the first floor. The administrative section of the building is located on the second floor, along with the offices and a terrace. The two floors are connected by a stairway and an elevator that is barrier free. The manufacturing part of the building consists of two separate units. Firstly, it is the hall for the manufacture of the aquariums, which is equipped with a crane rail. Secondly, it is the carpentry. The flat green roofs will cover the whole building. In addition, the two floor part of the building is designed with a white fasade, and the manufacturing part of the building is designed with facade in a tone of gray. Additionally, large
|
guest ::
