|
|
Preparation of PP composites by grafting using monomer treated filler
Kramerová, Nina ; Žídek, Jan (referee) ; Kučera, František (advisor)
Bachelor thesis is focused on preparation of composite materials with polypropylene matrix. The composites were prepared “in situ” with using Brabender mixer. Homogenization of matrix and filler and grafting of PP with anhydride of itaconic acid treated filler proceed together according to radical mechanism of polymerization. Luperox 101 [2,5-dimethyl-2,5-di(tertbutyl-peroxy)hexane] was used as an initiator of the reaction, the concentration of the initiator was 0.5 wt %, processing temperature 210 °C, 30 rpm. PP-g-IA is a compatibilizer between the matrix and the filler. Glass fibers, calcite and two types of ground wood pulp were used as filler. Two analytical methods were chosen to analyze the efficiency of grafting, acid-base titration and infrared spectroscopy. Assigned conversion of monomer was from 42 to 87 % for various fillers.
|
|
|
The formation of gehlenite and anortite in the ceramics body.
Matysová, Dorota ; Šoukal, František (referee) ; Ptáček, Petr (advisor)
This bachelor thesis deals with the study of mechanism and kinetics of gehlenite and anorthite formation in the ceramic body. Methods used for this study were thermal analysis (TG-DTA-EGA), HT-XRD and heating microscopy. The Kissinger equation which belongs to the mechanism-free isoconversional methods was used for the determination of the activation energy, the pre-exponential factor and the Avrami coefficient. Characteristic of reactants kaoline Sedlec Ia and precipitated CaCO3 (Penta, p.a.) using IR spectrometry, thermal analysis (TG-DTA-EGA), SEM and heating microscopy is also included in this thesis.
|
|
|
Results of Anorthite Creation in ceramic Body
Beránková, Karla ; Šveda,, Mikuláš (referee) ; Sokolář, Radomír (advisor)
Anorthite is crystalline phase in the ceramic body. Is acquired on burning a mixture of calcium ceramic raw material. This work deals with the influence on the resulting properties of anorthite ceramic body, especially flexural strength, porosity, shrinkage, thermal expansion coefficient. And the influence of different CaO sources on the properties. As a source of CaO was used calcium carbonate, calcium hydroxide and fluid fly ash.
|
|
|
Study of limestone decarbonation process
Koporcová, Diana Mária ; Bureš,, Jaroslav (referee) ; Dvořák, Karel (advisor)
Submitted master´s thesis examines research of connections between the type of limestone and the process of decarbonation. Types of limestones and genesis of limestones are described in the theoretical part of the thesis, followed by the description of the process of decarbonation, methods used for analysis of limestone structure and research of solved problems. Experimental part of the thesis describes HT-XRD analysis, SEM analysis and simultaneous TG/DTA analysis performed on chosen group of limestone samples. The process of decarbonation and the change of microstructure of the developing calcium oxide are examined from the obtained data.
|
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
guest ::
