|
|
Sanitation installation and gas installation in an apartment building with shops
Svoboda, David ; Wierzbická, Helena (referee) ; Vrána, Jakub (advisor)
The task of the Bachelor thesis is a design of sanitary installations and gas installations in the specified buidling object. The object is an apartment building with shops that has two above-ground floors and a basement. The apartments are located on the ground floor and both above-ground floors. Shops are located on the ground floor. The utility room, garage, storage rooms and other functional rooms are situated in the basement. The theoretical part is focused on the regulation of rainwater runoff. The computational part and the project consist of a design of sanitary sewer, internal rainwater drainage, plumbing, gas main and service pipes to the existing utility lines.
|
|
|
Civic amenities building
Svoboda, David ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of the master’s thesis is the design of a new music club building in Valtice. The first part of the thesis is the architectural and structural design. The building of irregular rectangular shape with one underground floor and two above-ground floors is divided into two main operational units – a dance hall and a rock club. The chosen structural system is reinforced concrete columns with locally supported floors. The walls are made of sand-lime blocks. The main insulation material is hemp. The building is covered by a flat roof with extensive greenery. The second part deals with the building services. Ventilation, heating and cooling are provided by HVAC units. The heat source is condensing gas boilers, the cooling source is an outdoor VRV cooling unit. The third part of the master‘s thesis is the acoustic assessment of the building. As a noise source, it mainly addresses the acoustic impact on the surrounding buildings in the vicinity. Furthermore, it optimizes the reverberation time in the rock club. The project was produced in accordance with the legal regulations and technical standards and created in AutoCAD software.
|
|
|
Nursery school, Třebíč
Svoboda, David ; Krupica, Roman (referee) ; Müller, Jan (advisor)
This diploma thesis on a topic “Nursery school in Třebíč” deals with a new building proposal of a nursery school. The building is situated in Třebíč, in a densely populated part of the town which is called Podklášteří. It is a brick single-storey detached building, mounted on a gentle slope with green vegetation. The layout of the building is divided into three departments and an operational part. In each department, there is a dressing room, food distribution, study and dining room, playroom with a cushy job, toy store, warehouse of folding beds and bedding, washroom, toilet, utility room and room for the air handling units. Departments are covered by wooden trusses which bear single-layer saddle-shaped roof with an extensive green vegetation. Above the operational part, there is a single-layer flat roof. Wall system is made of ceramic blocs of a system Porotherm and trusses are from a company called Vazníky D.N.K.
|
|
|
Rational reflection of faith in theology
Koch, Rudolf ; Salvet, Ondřej (advisor) ; Svoboda, David (referee)
The bachelor's thesis deals with theological reflection on the doctrine of the knowledge of the Christian faith. True knowledge is possible only with an understanding of the philosophical reason with which faith is interrelated. Reasonable thinking has its origins in the Greco-Roman wisdom of antiquity. The aim of the thesis is to describe theological teachings that deal with the search for truth from the time of ancient philosophy. The ancient books of the Old Testament describe, in the form of a distinction, the unity between the knowledge of faith and the intellectual knowledge of human truth. The fullness of truth has been perfected in the good news of Jesus and is accessible only in the light of faith. The main sources of faith are the testimonies of early christianity and the origin of the formulation of the confession of faith. The encyclical Fides et ratio, which is the primary source of this work, combines philosophy with theology. The study of philosophy is an essential part of theology and together they support the search for truth. Today's theological reflection emphasizes important aspects in matters of understanding the nature of man and the meaning of life. This truth is available only in the search for God, which is the culmination of every theological reflection. Keywords Word,...
|
|
| |
|
|
Apartment building
Petrák, Matěj ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
This bachelor's thesis addresses the construction of a four-story residential building. It focuses on selected parts of the project documentation for the construction process. The building is located in the Slatina district of Brno. The site is planned for four such residential buildings, but this thesis is specifically focused on only one of them. The capacity of the building is designed for 36 people distributed among 13 apartments. Each residential unit is assigned one cellar compartment located in the basement part of the building. There are apartments of sizes 2+kk, totaling 5 units, as well as 3+1 apartments, totaling 6 units. In the top above-ground floor, there are two 4+1 apartments with terraces. The stairwell area includes an elevator shaft with an elevator. The foundation is constructed on concrete strips. The vertical structures are made of ceramic blocks, and the horizontal structures are monolithic reinforced concrete. The building is insulated with mineral wool using the ETICS system. The roofing consists of a single-layer flat roof.
|
|
|
Electronic temperature measurement for a grill
Svoboda, David ; Burian, František (referee) ; Fiedler, Petr (advisor)
The work deals with methods of temperature measurement, electrical and non-electrical. Discussing the advantages and disadvantages of electrical methods of temperature measurement for applicability in the grill. It also discusses the selection of a suitable sensor to measure the temperature inside the grill. Subsequent design and implementation of the measuring system where the emphasis is on accuracy.
|
|
|
Apartment building
Plocek, Martin ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The aim of the bachelor's thesis is to process the documentation for the construction of a new residential building in sufficient detail as required by the project documentation for construction implementation. The concept of the residential building is intended as a starter urban housing. The apartment building is located in Rychnov nad Kněžnou. The building has four above-ground floors and is partially basement. The basement contains only storage rooms for individual apartments and a utility room. On the 1st floor, the apartment building is equipped with a stroller room with a bicycle storage area, a cleaning room, a room for house maintenance, and 4 residential units. The 2nd and 3rd floors, which are identical, contain 5 residential units. In the last above-ground floor, i.e., the 4th floor, there are 3 residential units, with 2 of them having their own terraces as part of the apartment. There are a total of 17 residential units in the building. The building is topped with a flat single-ply roof. The building is founded on concrete strips. It is constructed using masonry and is thermally insulated with a certified ETICS system. The ceiling structure consists of monolithic ceiling slabs.
|
|
|
Apartment building
Stehlík, Štěpán ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
This abstract summarizes the main points of the bachelor's thesis. The aim was to create a comprehensive design for a new apartment building, with a focus on incorporating architectural, urbanistic, and technical requirements in accordance with current legislation and technical standards. The project documentation includes detailed drawings, structural composition proposals, product listings, and solutions regarding acoustics, daylighting, and thermal engineering. The documentation also provides information about the layout of individual residential units, common areas of the building, technical facilities, and the concept of ventilation, heating, and hot water supply. The goal was to create a high-quality and sustainable living environment. The surrounding buildings consist of family houses or apartment buildings with flat roofs, with a maximum height of 12 meters from the adjacent terrain. The new construction has been designed taking this into account. The building is partially basement with stepped foundation structures, comprising one underground level and three above-ground levels. It is situated on its own plot of land. The roof is a flat non-accesible roof (intended only for inspections and maintenance purposes), and the ceilings are made of monolithic reinforced concrete. The vertical load-bearing structures are made of therm-type ceramic blocks. The building insulation is implemented using an External Thermal Insulation Composite System (ETICS). Additionally, parking spaces for the residents are provided on the plot of land.
|
|
|
Apartment building
Pojezdala, Petr ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The bachelor's thesis deals with the project documentation at the construction implementation level for an energy-efficient residential building. The designed residential building is located in the village of Tynište nad Orlici, specifically in its peripheral part called Podbori. The building is situated on a flat terrain with a slight slope. It is a four-story residential building with a basement, accommodating a total of seven housing units. The structural system of the building is designed using Therm blocks with a certified thermal insulation system. The Therm blocks form the internal load-bearing walls of the above-ground floors as well as the basement of the building. The perimeter walls of the basement floor are made of plain vibrated concrete blocks. The residential building is roofed with a flat single-ply extensive green roof, which is prepared for the installation of photovoltaic panels to utilize alternative energy sources. The building is founded on foundation strips, and the floor structures are designed as monolithic reinforced concrete slab floors.
|
guest ::
RSS feed.