|
|
Electronic Registry for Local Authority
Stránský, Karel ; Burget, Radek (referee) ; Rychlý, Marek (advisor)
Bachelor thesis "Electronic registry for local authority" is focused on usage of electronic registries for electronic communication between citizens and public authority. The first part describes the legislative page incidental with e-registries, principles of their functionality, and important requierements which are set on e-registiries. Furthermore elementary electronic signature's informations are included, along with creation and verification, and informations about certificates and certification authorities. The usage of digital signature at communication with electronic registry is also described. The second part is used to present particular concept of implemented sample electronic registry's system, and the solution of picked problems.
|
|
|
Structural stability heterogeneous weldment of carbon/austenitic steels
Havlík, Petr ; Stránský, Karel (referee) ; Foret, Rudolf (advisor)
Heterogeneous welded joints – type ferrite/austenite is inseparable part of structure for energy industry. Welding conditions and post weld heat treatment have a significant impact on the structural stability of welded joint. The structure determines resulting mechanical properties that determine lifetime of these joints. At the same time in microstructure changes in heat affected zone of the base material is diffusion of carbon through the weld interface. This work is focused on the analysis of structural stability of heterogeneous weld carbon/austenitic steel, which was formed carbon steel 22K (base material) and austenitic buttering layer EA 395/9 with a higher content of nickel. Evaluation of the structure was focused on the structure of weld metal (Böhler FOX SAS 2) and structure of the heat affected zone of base material. Metallographic evaluation was performed on the light microscope and scanning electron microscope equipped with the energy and wave dispersive analysis, which identified the contents of substitutional elements and carbon on the interface of carbon/austenitic steel. The results of metallographic analysis were compared with measurements of Vickers hardness and microhardness and calculations using Thermo-Calc software and software SVARY. The description and evaluation of the stability of the weld joints was determined by carbon content of the course interface using wave dispersive spectroscopy. The results of energy dispersive analysis were used to determine the type of carbides present at the interface of carbon/austenitic steel.
|
|
|
Heat treatment processes optimalization of ADI with graded Ni content
Klimentová, Jiřina ; Stránský, Karel (referee) ; Pavloušková, Zina (advisor)
This work is focused on segregation processes in the matrix of spheroidal graphite cast iron with different silicon and nickel content during heat treatment. The aim of this work is to trace the redistribution of the elements of interest during homogenization annealing with different dwell time by comparison of the effective distribution coefficients. Comparison of some specific properties and description of structure development of spheroidal graphite cast iron matrix from initial state to the state after ferritization and homogenization annealing is included in this work.
|
|
|
Influence of Explosive Hardening on the Structure and Characteristic of Hadfield Steel in Terms of use in the Railway Transport
Havlíček, Petr ; Podrábský, Tomáš (referee) ; Nesvadba,, Petr (referee) ; Schmidtová,, Eva (referee) ; Stránský, Karel (advisor)
The high alloyed austenitic manganese steel, the Hadfield steel, thanks to its good wear resistance of the work surface and maintaining the high toughness of the internal material in the same time, is successfully applied for casted crossings. The crossings are the most dynamic stressed components in the railway turnouts. Thanks to low surface and sub-surface hardness the occurrence of plastic deformation and the progressive wear of the crossing running surfaces can be found since the initial stages of the crossing operational life. One possibility how to increase the surface and the sub-surface hardness and this way improve the dimensional stability and the crossing lifetime as well is to apply the explosive hardening of the crossing running surfaces. The technology mentioned above means the application of the explosives in the imminent nearness to the running surface of the crossing, when the high pressure wave acting within the extremely short period actuates the plastic deformation of the material structure. The work deals with analysis of influence of explosive hardening on the structure and characteristic of Hadfield steel. The explosive hardened samples have the surface and the sub-surface hardness checked and the microscopic analysis and X – ray diffraction is applied, including the TEM analysis as well carried out by the transmission electronic microscope. The characteristics experimental testing including outcomes from assessment of the contact – fatigue load of the explosive hardened Hadfield steel samples are the part of the work as well. As an experiment final part the outcomes of the long –term validation, the surface hardness and wear of the crossing running surfaces of the explosive hardened crossing already installed into the Czech Republic railway track are introduced as well.
|
|
|
Microstructural Stability of Weld Joints of Austenitic and Ferritic Steels
Šohaj, Pavel ; Stránský, Karel (referee) ; Sopoušek, Jiří (referee) ; Foret, Rudolf (advisor)
This doctoral thesis summarizes the theoretical and experimental knowledge in the field of dissimilar weld joint of progressive austenitic and ferritic creep-resistant steels. The following materials were selected for the presented study: 316Ti stabilized austenitic stainless steel, martensitic 9-12 %Cr steel P92 and ferritic ODS steel MA 956. The main attention was focused on the long-term microstructural stability during high temperature exposure of heterogeneous joints of the austenite / ferrite type. The literature analysis critically evaluates the current state of knowledge in the field of microstructural stability of advanced creep-resistant steels weld joints. The practical experimental part was carried out in two directions. On the basis of the chemical composition phase equilibrium calculations were performed for each steel using the ThermoCalc software, giving the basic concepts about the dependence of the phase composition and the chemical composition of phases on temperature. In parallel with these calculations the laboratory joints 316Ti/P92 made by resistance welding and the MA 956/316Ti electron beam weld joints were prepared, analyzed in as-weld state and further annealed at different temperature conditions. Exposed joints were subjected to microstructure and phase analysis. The stability of the weld interface was mainly observed. Attention was also focused on the agreement between the calculation and experimental data in comparison with data published in the literature. Based on the calculations, experimental results and published data the suitability of the combination of materials is discussed in the thesis and reasoning about the behavior of studied weld joints during long-term high temperature exposure was formulated. Based on the results the expected degree of microstructural stability of 316Ti/P92 joint was confirmed, while the joints MA 956/316Ti were found to be unstable.
|
|
|
Technology of manufacture and treatment of medieval arrowhead
Kašpar, Jan ; Stránský, Karel (referee) ; Stránský, Karel (referee) ; Doležal, Pavel (advisor)
This thesis analyses issue of manufacture, typology and use of medieval arrowheads. In theoretical part describe historical evolution of bow and his archaeological discovery in Europe, especially from medieval times. After that is revealed historical evolution of arrowheads and describe their typology. In next chapters are mentioned ways of iron production, mainly in early medieval times and also describe technology of manufacture different types of arrowheads. There is a characterization of medieval arrow, his construction and characteristics. Continuously in this background research are revealing questions of penetration depend on the various types of arrowheads, which are testing on the most known types of armour like chainmail or breast plate. In experimental part of this paper are metallographicaly analyzing archaeological discoveries from the early and late medieval times. Conclusions about their manufacturing, treatment and possibilities of use are built on knowledge about arrowheads structures, hardness and shapes.
|
|
| |
|
| |
|
|
Diffusion of carbon in welding joints of low alloys and high alloy steels.
Zdvořáček, Marek ; Rek, Antonín (referee) ; Stránský, Karel (advisor)
Content of a document result measurements and analysis carbon´s diffusion at welding joint created from hight alloyed austenitic steel CSN 417242 and not alloyed steel CSN 412 050. Samples have been put throught isothermal anneal in a temperature range 500 °C up to 1100°C. Aim one´s effort to metalographyic quantification carburized and uncarburized zone. The next part of the document content measuring x-ray energy through microanalysis, where has been record course of a carbon disintegration and selected replacements elements at whole length of the welding joint . At the end of experimental part has been gauged course microhardness HV 0,05 at whole lenght of welding joint, from an acquired data has been chose the most optimal temperature of isothermal anneal, to produce the smallest structural notch.
|
|
|
Microstructure and hardness of bainitic weld deposits on rails
Havlík, Petr ; Stránský, Karel (referee) ; Foret, Rudolf (advisor)
Surfacing worn crane railways as renovation technology can make several possible ways, so as manual welding whit coated electrode, with filled electrode or automatic submerged arc. The resulting mechanical properties will depend on the additional materials, which was used to create surfacing. This thesis deals whit evaluation of integrity and microstructure single - layer to three - layer surfacing with filled electrode on the rail with predominantly pearlitic structure. Were evaluated areas with the greatest heat dissipation during cooling, due to the possible occurrence of side structures. The study employed the interaction light microscopy, the scanning electron microscopy equipped by energy dispersive chemical microanalysis, the macro and micro hardness measurement by Vickers.
|
guest ::
RSS feed.