|
|
Packet Processing Using DPDK Library
Procházka, Aleš ; Lichtner, Ondrej (referee) ; Grégr, Matěj (advisor)
This master thesis focuses on filtering and forwarding packets in high speed networks. Firstly the DPDK framework is introduced, which is used for fast packet processing. This project also introduces a design of application for high-speed packet filtering and design of tools for making it easier to work with that application. Subsequently, the implementation of this design is introduced and testing with comparison of results with a standard firewall
|
|
|
Projet of reconstruction of the 22 kV incoming substation and the cable network in the faculty hospital campus
Komárek, Filip ; Procházka, Aleš (referee) ; Orságová, Jaroslava (advisor)
This master's thesis deals with the area hospital distribution networkand one of the hospital's entry substation. The first part of this master's thesis deals with the project of the new cable network, her gradual revival without any power outages at the collection points. Futher, in this thesis is project of temporary transformer station for supplying power during the reconstruction of the HV switchboard. Subsequently, in this thesis is project of the new HV switchboard in one of the entry substation. new HV switchgear and a new HV substation were projected. Futher, in this thesis is proposed compensation of the whole area, including the HV network.
|
|
|
Design of 22 kV Cable Network in the Existing Complex of Faculty Hospital
Blažek, Tomáš ; Procházka, Aleš (referee) ; Orságová, Jaroslava (advisor)
This thesis describes the reconstruction network 10 kV HV networks in a teaching hospital in the transition to a new 22 kV voltage level according to valid regulations. The paper describes the current state of technological equipment and its gradual replacement with new technology at 22 kV voltage level in each power units so as not to limit the operation of the hospital. For this purpose, the new backup system for rotating spare resources. The thesis deals with new input distribution, which will serve as a transfer point between the customer and distributor of electricity as well as advance the existing technological equipment.
|
|
|
Project of Outgoing Transformer Unit for the Photovoltaic Power Station
Hanák, Miroslav ; Procházka, Aleš (referee) ; Orságová, Jaroslava (advisor)
This master’s thesis engages in project of outgoing transformer unit for the photovoltaic power station. It describes project and its design documentation what conducts to practising of construction. It has compared investing to more expansive transformer what has lower loss. It describes charges of operation’s transformer in twenty years. It leads project of cable low voltage. It compares whether is better to use aluminium or cupric cables. Project is led with respect for investment costs and minimum of operation loss.
|
|
|
Project of Photovoltaic Power Plant Grid Connection
Blažek, Tomáš ; Procházka, Aleš (referee) ; Orságová, Jaroslava (advisor)
This bachelors thesis deals with photovoltaic technology and economic evaluation of used technology equipment. The first part describes the technology for extraction of power from photovoltaic sources - transformer 22/0,4kV and its basic parts. Then there is the calculation of the amount of openings for cooling the transformer according to ČSN 33 3240. The second part focuses on the description of the major part of the photovoltaic plant. Here are divided solar panels on the material from which they are produced and the type of installation in the field. Next is describe the types of inverters, their principles and functions. The last part compares the different types of transformers and operating costs over the lifetime of plants (20 years), are described factors for proper selection of inverters and solar panels.
|
|
|
Sales Promotion and Advertising of Company
Rozmahelová, Tereza ; Procházka, Aleš (referee) ; Mráček, Pavel (advisor)
Bachelor thesis pursues the marketing communication of inBalance club, particularly the sales promotion and advertising. First part focuses on the theoretical area of marketing communication, communication mix and mainly sales promotion and advertising. Analytical part is devoted to the status quo of inBalance club, competition analysis and marketing research. Based on extensive research, the final chapter presents own suggestions and recommendations that should lead to improvements of inBalance club's marketing communication.
|
|
|
Design the Transformer Station for the Outgoing Power of Cogeneration Unit
Pastorek, Jaroslav ; Procházka, Aleš (referee) ; Orságová, Jaroslava (advisor)
The thesis deals with the design of a transformer station for the outgoing power of cogeneration unit with an electric capacity of up to 1 MW. The thesis describes the design procedure of individual devices such as a transformer with a nominal ratio 22/0,4 kV, high voltage switchgears and low voltage switchgears. With the proper selection of the transformer, along with the technical parameters, the economic benefits that come from its purchasing and operating costs with the transformer operation are also considered. Based on this, the economic comparison of selected types of oil transformers during 20 years is also developed. Another part of the thesis deals with HV and LV switchgears, which are dimensioned according to shortcircuit conditions in the transformer station. In conclusion this work deals with the grounding of a transformer station and design protection in accordance PPDS.
|
|
|
Project of Earthing System in 110/22 kV Transfornmation Station
Pavlík, Ludvík ; Procházka, Aleš (referee) ; Orságová, Jaroslava (advisor)
This Thesis is concerned with the concept of grounding of 110/22 kV transformer station. The aim of the Thesis is to create a ground network for grounding a specified outdoor substation. This 110 kV outdoor substation is formed according to H-scheme and encircles a wide area. In additon to this, an earth potential has to be distributed as equally as possible within the whole area of the substation. The most convenient alternative from the point of view of effective grounding and distribution of potential is a grid network. Therefore, the grid network is the means of grounding which I have chosen as a solution for this issue. In this solution, flat conductor network cables are used to cover the whole substation, with ground rods placed at the points of intersection. Parts of appliance can be then connected to this existing network, thus creating several parallel channels which provide grounding with low resistance. The network is made of common steel zinc-coated stip, size 30 x 4 mm. When proposing a concept of grounding and adjustment of ground electrodes, we have to take account of grounding requirements, stated according to ČSN standards. The proposed earthing system was created in appropriate size in order to meet all these grounding requirements. These requirements are also mentioned and described in a theoretical part of the Thesis. Second part of the Thesis consists of proposed concept of the grounding itself, together with calculated parameters. The grounding has to be carried out according to both safety regulations and electrical appliance requirements. The issue of grounding substations of power system is resolved by the ČSN standards 33 3201 (“Elektrické instalace nad AC 1kV”), 33 2000-4-41 (“Elektrická zařízení – Ochrana před úrazem elektrickým proudem”) and 33 2000-5-54 (“Elektrická zařízení – Výběr a stavba elektrických zařízení – Uzemnění a ochranné vodiče”) and by the PNE company standards 33 0000-4 (“Příklady výpočtů uzemňovacích soustav v distribuční a přenosové soustavě dodavatele elektřiny”) and 33 0000-1 (“Ochrana před úrazem elektrickým proudem v distribuční soustavě dodavatele elektřiny”). These standards apply to creating a concept of grounding and grounding of new, reconstructed or expanded electrical substations of power system.
|
|
|
Energy supplying of street tunnel
Kloc, Martin ; Procházka, Aleš (referee) ; Orságová, Jaroslava (advisor)
This bachelor's thesis describes the electric power supply of a road tunnel and explains general rules and requirements which are necessary to ensure the power supply for tunnel construction. Another topic of this thesis is design of the technological equipment and the whole power supply system for 8 km long road tunnel.
|
|
|
Detection and Automatic Analysis of Network Scans
Procházka, Aleš ; Kováčik, Michal (referee) ; Krobot, Pavel (advisor)
This bachelor thesis is focused on a computer network monitoring that utilizes flows. Firstly, there is a framework Nemea described, which can be used to build a complex system for network attack detection, and whose module is developed within the thesis. Secondly, port scanning is explained and different methods that can be used to scan ports are defined. The module is designed to detect horizontal scanning. The idea behind this method is to compare a unique number of destination IP addresses, which were asked for with a specific port, with a given threshold in a specific time window. Finally, in the practical part of the thesis the implementation of the module is described and results of the experiments on real data from Cesnet are presented.
|
guest ::
RSS feed.