|
|
Evaluation System of Thermal Condition Environment and his Measurement Uncertainties Analyze
Košíková, Jana ; Němeček, Pavel (referee) ; Kureková, Eva (referee) ; Vdoleček, František (advisor)
The Ph.D. thesis deals with the evaluation of indoor thermal environment in which people are located. A great attention is paid to the thermal comfort. If a person in a given environment does not feel well, then makes mistakes. Thermal comfort is created many parameters that can be monitored and managed. These parameters include not only temperature but also other parameters such as the mean radiant temperature, operative temperature, humidity and air velocity and the draft. All these parameters can be measured. The standard ČSN EN ISO 7726 is written how and what the parameters are measured. Furthermore, this standard provides requirements for measuring equipment. There are many professional measuring devices. Unfortunately, these devices are very expensive. Therefore are within the project GACR 101/09/H050 - Research on energy- saving equipment to achieve the quality of the indoor environment at our faculty developed sensors for thermal comfort, which have showed comparable accuracy measurements as a professional , but it will be cheaper than professional. Knowledge of real parameters of the developed sensor thermal comfort environment is important, as with any other measurement devices, and also need to verified whether it has the required accuracy. In order to objectively sensors testing were developed two chambers - the testing and calibration chamber. The developed sensors were tested both in the open laboratory, and also in the test chamber. Then uncertainties measurement were calculated from the results of measurements This work deals with the evaluation of thermal comfort, the measurement of parameters of thermal environment, the evaluating the results of measurements and determining the measurement uncertainty of the sensors. In this thesis, based on these results, were recommended suitable sensors for measuring various parameters environment.
|
|
|
Possibility of Measurement Automation
Ilichman, Ondřej ; Košíková, Jana (referee) ; Vdoleček, František (advisor)
The thesis is focused on the automation of measurement with the using of hardware and software. Efforts to objectification processes and eliminating human influence on the outcome are increasingly reflected in the technical fields of measurement. In this work, methods of measurement modification, transformation and subsequent analysis of the measured quantity are discussed. Since nowadays it is possible to automate nearly all types of measurement, it is shown, under what circumstances is appropriate to use automated measurements. The final section is devoted to solution of software and hardware design for measuring temperature in the server room. They are proposed 3 possible solutions and on the basis of their analysis the optimal variant is chosen.
|
|
|
Introduction to Six Sigma Method
Košíková, Jana ; Šácha, Jakub (referee) ; Bednář, Josef (advisor)
This diploma thesis deals with a Six Sigma method, about especially analysis defects of forms for tire production company Barum Continental. In the first, theoretic part, there is the Six Sigma method, improvement method and implementation into practice defined, and at last I attended to the tools of Six Sigma method, e. g. Control Charts, Regression analysis, Pareto analysis. In the second, practical part, there is the industrial process analyzed. Then I was introduced Barum Continental spol. s.r.o. concern, which data extended. Up to data processing I was used tools of Six Sigma method and also histogram.
|
|
| |
|
| |
|
|
Measurement in Control
Kahánek, Tomáš ; Košíková, Jana (referee) ; Vdoleček, František (advisor)
The purpose of this bachelor’s thesis is to familiarize a reader with the basic regulation circuits structure, feedback structure and measurement technic. This document describes basic and advacend measurement inaccuracies, system influences including methods of reduction this unwanted influences, which mostly influence the regulation results.
|
|
| |
|
|
Protection of personal data in the context of a data warehouse
Tůma, David ; Svatoš, Oleg (advisor) ; Kosíková, Jana (referee)
Diploma thesis deals with problematics of protection of personal data in Czech republic with link to legislation of European Union. The main subject of the thesis is detailed analysis of current legal standards and identifying the requirements resulting from the changes adopted. The found changes are practically judged from the data warehouse perspective and for each of them is presented a practical solution.
|
|
|
Evaluation System of Thermal Condition Environment and his Measurement Uncertainties Analyze
Košíková, Jana ; Němeček, Pavel (referee) ; Kureková, Eva (referee) ; Vdoleček, František (advisor)
The Ph.D. thesis deals with the evaluation of indoor thermal environment in which people are located. A great attention is paid to the thermal comfort. If a person in a given environment does not feel well, then makes mistakes. Thermal comfort is created many parameters that can be monitored and managed. These parameters include not only temperature but also other parameters such as the mean radiant temperature, operative temperature, humidity and air velocity and the draft. All these parameters can be measured. The standard ČSN EN ISO 7726 is written how and what the parameters are measured. Furthermore, this standard provides requirements for measuring equipment. There are many professional measuring devices. Unfortunately, these devices are very expensive. Therefore are within the project GACR 101/09/H050 - Research on energy- saving equipment to achieve the quality of the indoor environment at our faculty developed sensors for thermal comfort, which have showed comparable accuracy measurements as a professional , but it will be cheaper than professional. Knowledge of real parameters of the developed sensor thermal comfort environment is important, as with any other measurement devices, and also need to verified whether it has the required accuracy. In order to objectively sensors testing were developed two chambers - the testing and calibration chamber. The developed sensors were tested both in the open laboratory, and also in the test chamber. Then uncertainties measurement were calculated from the results of measurements This work deals with the evaluation of thermal comfort, the measurement of parameters of thermal environment, the evaluating the results of measurements and determining the measurement uncertainty of the sensors. In this thesis, based on these results, were recommended suitable sensors for measuring various parameters environment.
|
|
|
Introduction to Six Sigma Method
Košíková, Jana ; Šácha, Jakub (referee) ; Bednář, Josef (advisor)
This diploma thesis deals with a Six Sigma method, about especially analysis defects of forms for tire production company Barum Continental. In the first, theoretic part, there is the Six Sigma method, improvement method and implementation into practice defined, and at last I attended to the tools of Six Sigma method, e. g. Control Charts, Regression analysis, Pareto analysis. In the second, practical part, there is the industrial process analyzed. Then I was introduced Barum Continental spol. s.r.o. concern, which data extended. Up to data processing I was used tools of Six Sigma method and also histogram.
|
guest ::
RSS feed.