|
|
Wing design of competition aircraft
Jurda, Martin ; Navrátil, Jan (referee) ; Katrňák, Tomáš (advisor)
This bachelor thesis deals with wing design of the new competition aircraft for the SAE Aero Design East 2020 competition. Introduction of the thesis is focused on explanation and analysis of the rules taking into account wing design with the following analysis of the scoring equation. Following chapter deals with a research study on the concept of wing and the design of conceptual wing possibilities. Thesis continues with computational chapters containing calculations of the characteristics of designed wing and flight envelope load together with the wing load. The last part is a chapter including structural design of the wing and attachment of the wing to the aircraft.
|
|
| |
|
|
Wing system design of competition aircraft
Mahdal, Vít ; Hájek, Tomáš (referee) ; Katrňák, Tomáš (advisor)
This bachelor’s thesis deals with the wing system design of competition aircraft. The thesis consists of five main parts. The first part is an introduction to the competition – Air Cargo Challenge, and the mission of UAV. The second part details the compilation of flight envelope and loads acting on the aircraft. Part three describes stress analysis of the old fabric method of wing construction. Part four of the thesis gives suggestions of a new wing system design, and its stress analysis. The final part of this bachelor’s thesis describes the advantages and disadvantages of the new system design, and compares them to the old version.
|
|
|
Structural design and stress analysis of ski landing gear for airplane with short take-off and landing
Hostinský, Vladimír ; Vaněk, František (referee) ; Katrňák, Tomáš (advisor)
The aim of this thesis is a design of a ski landing gear for the STOL Cruiser airplane and strength analysis of its parts with consideration of UL-2 and CS-LSA regulation requirements. First part follows the design process from a concept to detailed design. Decisions taken during the process and reasons behind them are discussed. In second part requirements of regulations for said aircraft’s landing gear are summarized and forces acting on the landing gear are calculated. This calculation is followed by a strength analysis of critical parts. Analysis of composite body of the ski carried out with a use of FEA and optimalization of its composite material layout is presented in a more detailed way.
|
|
|
Conceptual design of an upper wing aircraft using structures parts of the previous type
Koudelka, Jaroslav ; Katrňák, Tomáš (referee) ; Jebáček, Ivo (advisor)
The aim of this diploma thesis is to design a new high-wing aircraft for the company TL ultralight using the structural elements from another models from their portfolio. The design is created with an emphasis on crew comfort and cabin ergonomics. The first part of the thesis focuses on the description of the basic requirements for the aircraft and its classification in aviation regulations. It also contains a research part of competing types and currently produced type, which the proposed aircraft should replace in the company's portfolio. Then follows the characteristics of the individual parts of the airframe, the specification of the parts, which will be used from another types from portfolio, and parts which will be completely designed. Great emphasis is placed on the layout of the interior and its design and ergonomic. The proposed aircraft then demonstrates theoretical calculations of basic performances and a preliminary mass analysis. In the end, the benefits of the newly designed aircraft are evaluated with respect to the competing types.
|
|
|
Design of ski landing gear for skiplane with short take-off and landing
Hostinský, Vladimír ; Dubnický, Lukáš (referee) ; Katrňák, Tomáš (advisor)
The aim of this bachelor thesis is a selection of the most suitable ski landing gear for a use on a given STOL aircraft and its installation on the aircraft according to the law regulations and requirements of the aircraft manufacturer. First part is strictly teoretical and deals with existing design variants of an aircraft skis. More practical second part of this thesis starts with a market research, which creates an overview of existing options of ski landing gears suitable for use on the aircraft. Part continous with a reduction of the options and ends with a choice of the most suitable one. Final part is devoted to the problem of an installation of the landing gear to the given aircraft with consideration of existing law regulations.
|
|
|
The design of the landing gear of the small two-seat airplane
Trojánek, Tomáš ; Katrňák, Tomáš (referee) ; Vaněk, František (advisor)
The aim of this master thesis is modification of landing gear for accomplishment CS-23 regula-tion from that purpose, because landing gear in the use can't pass this type of certification. The first part examines the alternatives of landing gear with consideration optimal technical and eco-nomical difficulty. After finding optimal type of landing gear with shock absorber is there part of designing and computing the load. Last part of thesis is about stress analysis of whole con-cept and reconsidering final changes.
|
|
| |
|
|
Installation of floats for the M-4Irbis airplane
Heczko, Nikodem ; Katrňák, Tomáš (referee) ; Palička, Radek (advisor)
This master’s thesis deals with the design of installation of floats for the M-4 Irbis airplane and it’s modification in aim to provide water level landing. Part of this thesis is selection of geometry of floats, weight analysis of the modified version and stress analysis of structural elements. The aim was to perform modification on a float plane which will have a minimal impact on the airframe and to meet the requirements of Certification Specification ASTM F2245 and CS-VLA. In conclusion, the hydrodynamic and aerodynamic characteristics including flight performance is determined. Final part is devoted to the design of the rudder for directional control of the floats.
|
|
|
Optimal modelling of rivet joints using finite element method
Giorgobiani, Ioseb ; Katrňák, Tomáš (referee) ; Bartoněk, Jaroslav (advisor)
Diplomová práce je zaměřena na optimální modelování nýtového spoje pro tři různé konfigurace pomocí metody konečných prvků v programu MSC. Nastran/Patran. Na základě prezentovaných výsledků je možné virtuálně simulovat chování nýtových spojů při zatížení, za účelem správného návrhu před provedením statických pevnostních zkoušek. Použitím těchto MKP simulací v procesu certifikace výrobku lze významně redukovat časovou i finanční náročnost pevnostních zkoušek. Při lepším porozumění chování konstrukce lze také lépe predikovat reálnou únosnost nýtových spojů.
|
guest ::
