|
|
Design of Coupling Pin Production
Blažek, Matěj ; Podaný, Kamil (referee) ; Řiháček, Jan (advisor)
Bachelor’s thesis is aimed production of pin, made from steel 11 320-5R. This piece is in accordance to serial production 500 000 pieces year -1 made by cold bulk forming. Specifically it is about heading and forward extrusion. From two production variant was chosen the one with lower strain. By calculations there was set the power needed for production that equals Fc= 368,5 kN. Because of this power there was chosen a machine AKP 3-5 from company Hatebur. In the next step there was designed method that is in the attachment to the thesis. Final step was a control whether the idea of production by simulation is correct or not.
|
|
|
Production of the distributor by non-convential forming technology
Blažek, Matěj ; Peterková, Eva (referee) ; Jopek, Miroslav (advisor)
The thesis is focused on the evaluation of the possibility of manufacturing a distributor body used for distribution of heat-bearing medium in underfloor heating. For the part, due to the series of 100 000 pieces·year-1, the technology of high-pressure hydrofroming without active action of axial presses is chosen. The original solution with a forming pressure of 58,5 MPa did not lead to success and an optimization was necessary, where the pressure was increased to 158,5 MPa, which also did not lead to success. This was followed by a further optimization consisting of hot forming at 700 °C and a pressure of 158,5 MPa, again with no successful solution. The last possible treatment option of changing the material to 11 321 steel and pressure 134,2 MPa was not successful and the high pressure hydrofroming method with passive action of axial dies is not recommended for industrial practice. The final step was an economic evaluation, where the price per piece was determined to be 133,3 CZK with a 20% margin. Considering that the product is suitable the profit will start to be generated after the production of 140 460 pieces.
|
|
|
Lobbying - economic and legal aspects : attitudes of members of the law academia and members of the lower house of the Parliament of the Czech Republic to the regulation of lobbying
Blažek, Matej ; Hraba, Zdeněk (advisor) ; Bažantová, Ilona (referee)
Lobbying - Economic and Legal aspects Abstract The diploma thesis deals with lobbying and its economic and legal aspects. The aim of the thesis is to present lobbying from a broad perspective in the context of other regulations by using descriptive, comparative and analytical methods and to provide a comprehensive overview of the development of efforts to regulate lobbying in the Czech Republic. Particular attention is paid to the analysis of the last governmental regulatory initiative where I am testing a hypothesis of whether the underway regulation is systemically correct in light of examples in other countries. I also conducted two surveys aimed at finding out the attitudes of members of the law academia and members of the lower house of the Parliament of the Czech Republic to the regulation of lobbying in the Czech Republic. The data serve both to (i) illustrate the interpretation of lobbying across the work, (ii) but also because of the specific proposed variant of lobbying within the framework of the approved substantive intent of the lobbying law (the deadline for submitting a paragraph to the government is set to end 2018), and (iii) I believe that they can be useful even when finalizing the bill, or other later proposed measures under the de lege ferenda considerations on lobbying. The thesis is...
|
|
|
Design of Coupling Pin Production
Blažek, Matěj ; Podaný, Kamil (referee) ; Řiháček, Jan (advisor)
Bachelor’s thesis is aimed production of pin, made from steel 11 320-5R. This piece is in accordance to serial production 500 000 pieces year -1 made by cold bulk forming. Specifically it is about heading and forward extrusion. From two production variant was chosen the one with lower strain. By calculations there was set the power needed for production that equals Fc= 368,5 kN. Because of this power there was chosen a machine AKP 3-5 from company Hatebur. In the next step there was designed method that is in the attachment to the thesis. Final step was a control whether the idea of production by simulation is correct or not.
|
|
|
Využití plemene suffolk v malochovu
Blažek, Matěj
In this bachelor thesis I dealt with the influences that affect the growth and the car-cass value of suffolk lambs in small farms. From domestic and foreign citations, the most important influence is nutrition, but also age, gender, litter or breed. Rams have a better nutrient conversion than ewes, single-rats have better growth and carcass values compared to twins or moths, ewes have better and fatter meat than rams or castrates, meat breeds have the best daily gains and have the best carcass value. Part of this work is the proposal of material and methodology for monitoring growth and carcass values, which I designed for use in a small farm at Mr. Sysala's farm, where we weighed the suffolk lambs in February 2019. I will continue this weighing I will pre-sent in my thesis.
|
|
|
Lobbying - economic and legal aspects : attitudes of members of the law academia and members of the lower house of the Parliament of the Czech Republic to the regulation of lobbying
Blažek, Matej ; Hraba, Zdeněk (advisor) ; Bažantová, Ilona (referee)
Lobbying - Economic and Legal aspects Abstract The diploma thesis deals with lobbying and its economic and legal aspects. The aim of the thesis is to present lobbying from a broad perspective in the context of other regulations by using descriptive, comparative and analytical methods and to provide a comprehensive overview of the development of efforts to regulate lobbying in the Czech Republic. Particular attention is paid to the analysis of the last governmental regulatory initiative where I am testing a hypothesis of whether the underway regulation is systemically correct in light of examples in other countries. I also conducted two surveys aimed at finding out the attitudes of members of the law academia and members of the lower house of the Parliament of the Czech Republic to the regulation of lobbying in the Czech Republic. The data serve both to (i) illustrate the interpretation of lobbying across the work, (ii) but also because of the specific proposed variant of lobbying within the framework of the approved substantive intent of the lobbying law (the deadline for submitting a paragraph to the government is set to end 2018), and (iii) I believe that they can be useful even when finalizing the bill, or other later proposed measures under the de lege ferenda considerations on lobbying. The thesis is...
|
guest ::
RSS feed.