| |
|
Řešení parametrů proudu při průtoku stlačitelné vazké tekutiny minikanálem
Hála, Jindřich ; Šafařík, Pavel ; Luxa, Martin
V příspěvku budou předloženy výsledky experimentů provedených při průtoku vzduchu kanálem s charakteristickým rozměrem kanálu: výška 2mm, šířka 100mm, délka 100mm za podmínek aerodynamického ucpání. Na základě pneumatických i optických měření bude popsán vývoj parametrů proudu podél minikanálu a podstatný vliv nevratných dějů v proudovém poli. Výsledky experimentů budou porovnány s výsledky teoretických řešení i s výsledky numerických simulací a diskutovány.
|
|
Notes to Aerodynamic Testing of Supersonic Blade Cascades
Šimurda, David ; Luxa, Martin ; Šafařík, Pavel
Relatively narrow space for aerodynamic design of long rotor blades applied at last stages of large output steam turbines often results in blades with tips operating at supersonic regimes. This brings number of problems. Main of these are additional sources of loss and rather thin border between sections operating under turbine and compressor regimes one adding to performance and the other deteriorating it. Therefore, aerodynamic cascade data on turbine blading for a range of supersonic inlet and outlet conditions are needed. However, ensuring specified supersonic conditions in a high-speed wind tunnel for blade cascade tests is not an easy task and thus it deserves attention.
|
|
Oblique Shock Wawes in Saturated Steam
Šimurda, David ; Nový, A. ; Šafařík, Pavel
The paper deals with modeling of oblique shock waves in saturated steam. A theoretical model is based on balance of mass, momentum and energy taking in account shock wave geometry. Numerical solution of steam parameters is performed using the IAPWS-IF97 steam thermodynamic properties. The aerodynamic calculation problem is formulated to solve oblique shock wave parameters for saturated steam upstream of the oblique shock. Achieved results are presented by means of hodograph shock polars and pressure-deflection shock polars and they are analyzed and discussed.
|
|
Modelování proudových procesů v turbostrojích užitím aerodynamických tunelů
Šafařík, Pavel ; Luxa, Martin ; Šimurda, David
V příspěvku jsou popsány postupy přípravy a provedení vysokorychlostního aerodynamického výzkumu na modelech průtočných částí lopatkových strojů. Dosažené výsledky z výzkumu proudění v lopatkových mřížích reprezentujících řezy v lopatkování strojů jsou podrobně diskutovány. Užitím optických měřících metod jsou vytvořeny podklady pro popisy struktury vysokorychlostních proudových polí a pro kvantifikaci parametrů proudícího vzduchu. Užitím měřící metody traverzování, jejíž nedílnou součástí je redukce dat naměřených proudových veličin, jsou získány významné aerodynamické parametry pro návrhy, výpočty a další výzkum lopatkových strojů. Uvedené výsledky jsou vybrány z rozsáhlých souborů dat z modelování průtočných částí posledních stupňů parních turbín velkého výkonu, záběrníku oběžného kola odstředivého kompresoru a z výzkumu proudění v kompresorové mříži. Jsou uvedeny a diskutovány i výsledky výzkumu proudových polí při modelování nenávrhového provozu lopatkových strojů.
|
|
On Parameters of Shock Waves in Saturated Steam
Nový, A. ; Jícha, D. ; Šafařík, Pavel ; Hajšman, M.
The paper deals with theoretical and numerical study of shock wave parameters in saturated steam. Theoretical approach is based on mass, momentum and energy balance equations. An iterative procedure for solution of state parameters is derived. Numerical solution of steam parameters is performed by means of the iterative procedure using the IAPWS-IF97 water and steam thermodynamic properties. Results are presented and compared with results obtained from ideal gas theory.
|
| |
|
Aerodynamics tests of a transonic turbine blade cascade model consisting of low number of blades
Šimurda, David ; Luxa, Martin ; Šafařík, Pavel ; Synáč, J.
Contribution is concerned with experimental investigation of the transonic turbine blade cascade aerodynamic characteristics. Due to specific geometry of the blade cascade, the blade cascade model consists of six blades only. Therefore, special experimental setup is adopted and its influence on the resultant blade cascade aerodynamic characteristics is discussed. Experimental data are obtained applying both optical (interferometry, schlieren technique) and pneumatic methods (mainly traversing with a five-hole conical probe). Special attention is paid to flow structures, which significantly contribute to the increase of kinetic energy loss coefficient. Results of current investigation are compared to former results obtained at usual experimental set-up.
|
|
Annular Jets and Annular Impinging Jets
Turek, Tomáš ; Trávníček, Zdeněk ; Šafařík, Pavel ; Tesař, Václav
A near field of annular jets and annular impinging jets is experimentally investigated at three inner/outer diameter ratios 0.84, 0.90 and 0.95. Time-mean velocity profiles are evaluated, and three main flow field zones are distinguished – in agreement with the literature, namely the initial merging zone, the intermediate one, and the fully merged one. A distribution of the pressure on the impingement wall is measured for various nozzle-to-wall distances. Two basic annular impinging jet regimes are clearly distinguished, with either small or large recirculation bubbles. Moreover, a hysteretic behavior has been identified under specific parameters.
|
| |