| |
|
Changes to rights to claim foster care benefits since year 2013
ZEMANOVÁ, Hana
Foster care is a form of social care in the Czech Republic. A fostered children and foster parents receive from state a foster care benefits. Up until 2012 these benefits were set by Act No. 117/1995 Coll., on State Social Support. In 2012, Amendment No. 401/2012 Coll., transferred foster care benefits to Act No. 359/1999 Coll., for Social-Legal Protection of Children. With this change in law, there was also a change in the conditions of entitlement to claim foster care benefits and the establishment of efforts to professionalize foster care. The aim of my work is to analyse and compare the legislation of changes to foster care benefits from the perspective of the State Social Support Law and the Law of Social-Legal Protection of Children. I have tried to confirm or invalidate the hypotheses using quantitative research, this forms the empirical part of my work. Hypotheses were focusing on comparing the situation before and after the changes of Law for Social-Legal Protection of Children. As a technique I chose to study documents and using these documents I have provided secondary analysis. I have worked with the statistics of the Ministry for Labour and Social Affairs of the Czech Republic, the Labor Offices and the Regional Offices. The results of my findings have shown that more foster parents should be able to claim foster care benefits. Passing the bill on professional foster care has increased the interest in providing foster care, this must be seen as positive outcome. My research could be used as study material for other students of social science or for people who work in the area of social-legal protection of children. It could also be used as feedback for ministerial officials to sea the real situation since the changes in foster care law.
|
| |
|
Comparison of Business Intelligence implementation using open source solutions for middle size companies
Schmidt, Róbert ; Maryška, Miloš (advisor) ; Sládek, Pavel (referee)
The main goal of master thesis is to analyze and propose possible low cost Business Intelligence solution with open source technologies and comparison of available tools for implementation in middle size company. We compare Pentaho and Jaspersoft tools implemented on local hardware and cloud environment with Microsoft Azure services. The theoretical part focuses mainly on understanding the business intelligence and its architecture, because architecture is an important part of the work. Actual tools are designed as stand alone modules for specific activities in the business intelligence lifecycle. Low cost tools are often connected with open source technologies and cloud computing. This part of the work contains explanation of these terms and their advantages and disadvantages for our chosen target group of companies. The analytical part includes defined parameters by which it is conducted analysis of tools and their comparison. Business Intelligence solutions are divided according to arcitectural layers. The evaluation criteria are divided into financial, technical and user category. In conclusion, chosen tools are compared and evaluated. The main contribution of this thesis is comparison of open source business intelligence tools for implementation in middle size company. According to the EU directive, middle size company does not exceed 250 employees or profit is less than 50 million euros. The reader can compare the different solutions and their pitfalls or shortcomings that could be critical for the implementation.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
|
Satisfaction of women in labour with nursing care during childbirth.
KLÍMOVÁ, Magdaléna
This dissertation investigates the level of satisfaction among expectant mothers with the care services provided during childbirth. Satisfaction reflects a subjective perception of an expectant mother in meeting her needs during childbirth. The feeling of satisfaction is very personal, however, evaluation of the care provided needs to be determined and not ignored. It is important for expectant mothers that the health care professionals present as empathic, friendly, co-operative, and tactful.Theoretical part was developed from evidence-based literature and available findings related to this problematic. There is a description of a childbirth process including a midwife's role during the individual stages of childbirth and options for pain management. Other chapters focus on midwife's approach toward an expectant mother and factors which influence the level of satisfaction during childbirth. Dissertation's aim was to determine whether the expectant mothers were more satisfied in smaller maternity departments, and to evaluate the way a midwife may influence the mother's satisfaction. There were two hypotheses stated and verified by a statistical testing. Hypothesis No. 1: Expectant mothers are more satisfied in smaller maternity departments than larger ones. Hypothesis No. 2: The level of satisfaction is influenced by midwife's empathic approach. Practical part focused mainly on a midwife's approach toward expectant mother. A quantitative research was implemented in form of questionnaires. The research sample constituted of expectant mothers from four postpartum departments in the Czech Republic. In total the sample included 215 expectant mothers, 109 from smaller facilities and 106 from larger maternity departments. In terms of the overall level of satisfaction with their midwife during the childbirth process, 89% of expectant mothers from smaller maternity departments and 83% of expectant mothers from larger departments stated they were satisfied. Conversely, 11% of respondents from smaller facilities and 17% of respondents from larger facilities were dissatisfied. Based on research analysis comparing the level of satisfaction of expectant mothers from smaller and larger maternity departments the hypothesis no. 1 "Expectant mothers are more satisfied in smaller maternity departments than the larger ones" did not show as statistically significant and was rejected. Nonetheless, the questionnaire responses clearly showed that empathic approach of a midwife influenced expectant mother's satisfaction. Statistical testing demonstrated a significant correlation between an expectant mother's satisfaction and empathic approach of a midwife. The second hypothesis "The level of satisfaction is influenced by midwife's empathic approach" was accepted.The research findings may serve as a guiding material for the midwives in order to provide a high quality care to expectant mothers during the childbirth process. They may also be utilised by future midwives who are in undergraduate preparation for the profession, or those professionals who contribute in any way during the childbirth process. Additionally, the research findings may be presented at conferences designated for midwives.
|
| |
|
Effect of low doses of herbicide paraquat on antioxidant defense in Drosophila
SÁBOVÁ, Michala
Disruption of cell equilibrium between production of free radicals and antioxidant defence is named oxidative stress. The main component of antioxidant mechanism is activity of antioxidant enzymes, which include superoxide dismutase (SOD) and catalase. In this study we evaluated the effect of herbicide paraquat on response of SOD and catalase, their transcription level and locomotion activity in Drosophila melanogaster. We exposed the flies to a wide range of paraquat concentration. Our results revealed that transcript and enzymatic levels of both SOD and catalase have a similar biphasic dose response with the peaks at 2,5 ?M paraquat concentration, resembling hormetic effect. Then, males were more sensitive than females. However, females had an increased locomotion activity. We found that paraquat susceptibility is increased in males and mating flies. Therefore, this study supports hypothesis of stress sensitivity elevation as a physiological cost of reproduction.
|
|
Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
guest ::
