|
|
Low power electrical machines
Martinek, Radek ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
The master’s thesis introduces various types of electric motors. Overall, it is divided into 6 chapters, which the first deals with special type of electric motors, namely: permanent magnet DC motor with coreless winding, piezoelectric motor and three phase induction motor with solid rotor. For all of these motors are introduced principles, types, advantages, disadvantages and applications. The second part of thesis deals with perspective types of motors, namely: single phase induction motor and reluctance motor. For all of these motors are introduced principles, types, advantages, disadvantages and applications. The third chapter deals with analysis parameters of single phase induction motor. The analysis is performed on a borrowed motor from ATAS company by measurement and verification using simulation program Ansys Maxwell. The fourth part discusses the possibilities of increasing the effectiveness of borrowed electric motor. The following is chapter five, which deals with increasing the efficiency of the motor by changing metal sheets. Results are verified by simulations with Ansys Maxwell and measurements on sample of electric motor. The last part presents electric motor design with new selected electric sheets with lower specific losses, but also with lower magnetic induction.
|
|
|
Analysis of steel grade influence on small induction machine efficiency
Plíšek, Oldřich ; Klíma, Jiří (referee) ; Mach, Martin (advisor)
The theoretical part of the bechelors thesis examining the impact of the material of the magnetic circuit on the efficiency of induction motors is devoted to analysis of the induction motor and its losses. It also describes the measuring, including calculations of individual losses. Another theoretical part examines the impact of specific losses on the magnetization characteristics of assessed laminations. The practical part includes laboratory measurements of single phase and three phase motors ATAS Electromotory Náchod brand with multiple types of laminations. Measured values are used to calculate individual losses, which are later mutually compared. Models of measured motors with multiple types of laminations are simulated with the aid of ANSYS Maxwell RMxprt program. Analysis of engines with specific types of laminations are performed with the aid of analytical calculations. Results of calculations are compared with simulated and measured values.
|
|
|
Analysis of core loss of a small induction machine
Plíšek, Oldřich ; Cipín, Radoslav (referee) ; Mach, Martin (advisor)
The aim of this master´s thesis is to analyze core losses of a small induction motor. Analyzed values are obtained from laboratory measurements, software analysis and 2D finite element method simulation. The theoretical part of this thesis consists of two parts. The analysis of the higher spatial harmonics presents in the induction motor and the analysis of core losses of the motor. Practical part consists of laboratory measurements according to ČSN. Measured values are used to calculate individual losses. The next part consists of creating a model for software analysis (Maxwell RMxprt). The generated model is converted into a 2D simulation environment (Maxwell 2D), where it is adapted to obtain values from the examined parts (rotor and stator teeth and rotor cage). Results of simulations at different loads are compared and analyzed from the point of view of higher harmonics.
|
|
|
Analysis of core loss of a small induction machine
Plíšek, Oldřich ; Cipín, Radoslav (referee) ; Mach, Martin (advisor)
The aim of this master´s thesis is to analyze core losses of a small induction motor. Analyzed values are obtained from laboratory measurements, software analysis and 2D finite element method simulation. The theoretical part of this thesis consists of two parts. The analysis of the higher spatial harmonics presents in the induction motor and the analysis of core losses of the motor. Practical part consists of laboratory measurements according to ČSN. Measured values are used to calculate individual losses. The next part consists of creating a model for software analysis (Maxwell RMxprt). The generated model is converted into a 2D simulation environment (Maxwell 2D), where it is adapted to obtain values from the examined parts (rotor and stator teeth and rotor cage). Results of simulations at different loads are compared and analyzed from the point of view of higher harmonics.
|
|
|
Low power electrical machines
Martinek, Radek ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
The master’s thesis introduces various types of electric motors. Overall, it is divided into 6 chapters, which the first deals with special type of electric motors, namely: permanent magnet DC motor with coreless winding, piezoelectric motor and three phase induction motor with solid rotor. For all of these motors are introduced principles, types, advantages, disadvantages and applications. The second part of thesis deals with perspective types of motors, namely: single phase induction motor and reluctance motor. For all of these motors are introduced principles, types, advantages, disadvantages and applications. The third chapter deals with analysis parameters of single phase induction motor. The analysis is performed on a borrowed motor from ATAS company by measurement and verification using simulation program Ansys Maxwell. The fourth part discusses the possibilities of increasing the effectiveness of borrowed electric motor. The following is chapter five, which deals with increasing the efficiency of the motor by changing metal sheets. Results are verified by simulations with Ansys Maxwell and measurements on sample of electric motor. The last part presents electric motor design with new selected electric sheets with lower specific losses, but also with lower magnetic induction.
|
|
|
Analysis of steel grade influence on small induction machine efficiency
Plíšek, Oldřich ; Klíma, Jiří (referee) ; Mach, Martin (advisor)
The theoretical part of the bechelors thesis examining the impact of the material of the magnetic circuit on the efficiency of induction motors is devoted to analysis of the induction motor and its losses. It also describes the measuring, including calculations of individual losses. Another theoretical part examines the impact of specific losses on the magnetization characteristics of assessed laminations. The practical part includes laboratory measurements of single phase and three phase motors ATAS Electromotory Náchod brand with multiple types of laminations. Measured values are used to calculate individual losses, which are later mutually compared. Models of measured motors with multiple types of laminations are simulated with the aid of ANSYS Maxwell RMxprt program. Analysis of engines with specific types of laminations are performed with the aid of analytical calculations. Results of calculations are compared with simulated and measured values.
|
guest ::
