|
|
Measurement of the fiber optical transport links
Ambrož, Jan ; Škorpil, Vladislav (referee) ; Reichert, Pavel (advisor)
This thesis deals with the measurement of optical transport links. In particular, the measurement of attenuation, chromatic and polarization mode dispersion. Specic me- asurement systems using a WDM and passive optical networks. Within each chapter are listed the causes and eects restrictive factors and methods of measurement. In chapter Attenuation measurements are described radiation and material loss as the main causes of depression. Methods whitch are described two lengths, insert loss and reectometri. Chromatic dispersion at dierent speeds of various wavelengths limits systems with high transfer rate. Methods of measuring the phase shift, dierential phase shift, pulse time delay and interference. Polarization mode dispersion is a random phenomenon caused double refraction, must be measured after completion of the route. Scanning wavelen- gth, traditional and general interference, reectometri and the polarimetric are methods of measurement. It described the measurement of WDM systems in three stages of its build. In brief PON networks are presented, with the specicities of the measurement over splitter. Most chapters are supplemented by the results and conclusions of practical measurements. At the end of the work are given by the two standards deal with the measurement of optical transport links.
|
|
|
The effect of optical fiber attenuation on the capacity of optical traces
Žák, Ondřej ; Škorpil, Vladislav (referee) ; Reichert, Pavel (advisor)
The essence of this thesis is the creation of complex insight on optic fibre attenuation. There is successive steps explained mechanism of optical attenuation and characterized its spectral dependence. We are describing primary elements of optical attenuation, its sorts and their own spectral dependence. Bachelor´s thesis is explaining requirements of transmission system to spectral characteristic optic fibre and influence of optic fibre attenuation on capacity of optical trace. Output of bachelor´s thesis is program solution of designed mathematical model for calcula-tion spectral dependence of optical attenuation. Program is realized in MATLAB and there is furthermore added version in Microsoft Office 1997-2003. Created program is able to ap-proximate points data obtained from measurement of optic fibre by using Lagrange interpola-tion polynomial and Rayleigh scatter interlay.
|
|
|
Design of optical amplifier
Somora, Rastislav ; Číž, Radim (referee) ; Slavíček, Karel (advisor)
This Bachelor's thesis deals with design and construction of support circuits for a modern optical amplifier the SOA. In the first chapter, optical transmitting medium with its physical properties and types of used cabels is described. The overview includes a list of optical cables, their damping properties and parasitic effects which can occur durring comunication. Next chapter is focused on the optical signal sources used in modern data networks, describes their internal structure and physical essence. Third chapter is dedicated to designing the optical amplifier with the SOA circuit. It focuses on the right choice of parts, their arrangement and layout of the design. Last chapter deals with set up, calibration and control of the optical amplifier module.
|
|
|
Free-Space Optics data link
Šála, Jakub ; Číž, Radim (referee) ; Šporik, Jan (advisor)
In this thesis, shows a current issue for free space optics, limiting their use in practice with regard to the availability and reliability. They conducted measurements on wireless optical links and the observed values is calculated by the availability of the connection. Subsequently, measurements are performed on alternate versions of wireless and copper connections. Observed values were compared with a wireless optical link. It is made of optical design of wireless connections at home.
|
|
|
The audit methology of optical networks
Štěpán, Petr ; Münster, Petr (referee) ; Reichert, Pavel (advisor)
This work deals with summary of optical system audit in the terms of all layer of the reference model ISO/OSI. Introduction of the work focuses on exploring issues of management networks control, the description of ISO/OSI model and explanation of the terms QoS and SLAs. The description of the optical fiber transmission follows after that. The characteristics of the waveguide and optical communication system components with regard to its reliable operation and management are analyzed. Some major types of optical networks are described. Following section contains a description of methods used in the audit, further the methods for measuring physical, connection and network layer of the reference model are discussed more thoroughly. The work also contains a partial analysis of the audit of the physical layer of the selected section of the Brno academic network optical line. Of all these methods for networks control the final audit report for the optical network with selected limits is compiled as a conclusion of the work.
|
|
|
Dynamic analysis of structure loaded seismic loads
Šulerová, Zdeňka ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
This thesis deals with the calculation of response of reinforced concrete construction on the effect of seismic tension. Time and spectral analysis were made. They are mentioned as possible ways of calculation in EN 1998 - 1:2004 norm. Final figures of global deformations and stress on selected beam from the time and spectral analysis were firstly compared for the horizontal components of seismic stress affecting only in one direction. Subsequently comparison of time progress to combination of these effects mentioned in relevant norm was made. In the conclusion the results of used analysis are appraised.
|
|
|
RF power meter
Hlaváč, Štěpán ; Jedlička,, Petr (referee) ; Drexler, Petr (advisor)
This master’s thesis describes various principles of measurement of electromagnetic waves in a free space and on a line. Used sensors and their real parameters are given for every method. The analysis of protections of high-frequency inputs of measuring instruments is done here and the most suitable method and protections of input for realization are chosen. The analysis of design of secondary protection of high-frequency input is done in this project. The protection of input is realized and measured. The suitable method of measurement is chosen as well as the sensor for measurement of power. The block diagram and circuit diagram of the meter of power are designed. According to designed conception the measuring instrument for measurement of power is realized and its single qualities are measured during the realization. In the final part its precision is measured and the evaluation of results is done.
|
|
|
Software tool for education of the computed tomography
Doležalová, Anna ; Králík, Martin (referee) ; Mézl, Martin (advisor)
This semestral thesis is focusing on the process of displaying X-ray scanning and it’s simulation. There is described X-ray radiation and it’s possible interactions and changes. It’s also focused on the origin and detection of this radiation. In the practical part of the thesis, there is simulated the origin and attenuation of spectrum while comming through material. Then simulation software is created using MATLAB program. The simulation software allows to simulate basic processes of classical systems: X-ray tube, the interaction of radiation with the patient and subsequent detection. After selecting parametrs of simulation, the effects of the selected parametrs and X-ray spectrum will be displayed. The thesis also describes and subsequently simulates how image reconstruction of computed tomography works.
|
|
|
Nonlinear phenomena in optical fibers
Burian, Radek ; Horváth, Tomáš (referee) ; Münster, Petr (advisor)
The subject of this thesis is to describe nonlinear phenomena in the optic fiber. The theoretical part describes a principle of transmission in optical fibers. Optics modules, fibers and their parameters are described marginally. Except nonlinear phenomena, there is also described linear phenomena such as attenuation, dispersion, scattering. In terms of nonlinear phenomena there is described second order phenomena such as Second harmonic generation (SHG), Sum and difference harmonic generation (SFG and DFG) and third order phenomena, such as Kerr effect, Third harmonic generation (THG), Four-wave mixing (FWM) and Cross phase modulation (XPM). There are also described nonlinear scattering, such as Raman´s and Brillouin´s scattering. The Four-wave mixing is simulated in the first half of the practical part. Four-wave mixing occurs in DWMD systems, where can invoke cross-talks between channels. In the second half of the practical part is measured this nonlinear phenomenon. The aim of the measurement is to understand the behaviour of the FWM and find the way how to eliminate its power. The Four-wave mixing measurement is based on the simulation. Second measurement is designed for Brillouin scattering. The conclusion from simulated and laboratory part from both measurements are compared with theoretical knowledge.
|
|
|
Topology for next generation access networks
Kovář, Adam ; Sládok, Ondřej (referee) ; Grenar, David (advisor)
This thesis consists of basic requirements, application of optical fibres and final simulation of this network in specific location. This template shows ideal construction of optical fibre network for this specific location and also displays expected price of building this kind of network. In this thesis will be described this location and its problematic parts which can have critical impact on building of this network. As a part of design of this network we chose optical fibre and technology for protection of optical fibres. All of these items are collected and we can see approximate price. This thesis shows how the customer will be connected to network and also to this thesis is attached the map which shows exact position of the network. Simulation will prove networks stability and shows delay which can occur during using basic and expected applications on network.
|
guest ::
