|
|
PIV and LIF study of slot continuous jet at low Reynolds number
Broučková, Zuzana ; Hsu, S.-S. ; Wang, A. B. ; Trávníček, Zdeněk
This study deals with a continuous jet issuing from a small narrow slot with a width of 0.36 mm. The experimental arrangement is based on the piezoelectric synthetic jet actuator studied previously for easy comparisons. The working fluid is water at room temperature. The experiments were performed using methods of particle image velocimetry (PIV) and flow visualization (laser induced fluorescence, LIF). The time-mean volume flux through the exit nozzle was quantified using precise scales. The mean velocity and the Reynolds number were evaluated as Um = 0.12 m/s and Re = 90, respectively. The results of LIF and PIV techniques revealed the three-dimensional character of the flow field, namely the saddle-shape velocity profiles. This behavior is typical for steady jets from a rectangular nozzle. The obtained results were compared with previous measurements of the synthetic jet issuing from the same cavity and the slot nozzle.
|
|
|
Termoakustický prime mover – demonstrace a prvotní experimenty
Chen, Y.-Ch. ; Vít, Tomáš ; Lédl, V. ; Kordík, Jozef ; Maršík, František ; Wang, A. B. ; Doleček, R. ; Trávníček, Zdeněk
The present paper focuses on an experimental investigation of the thermoacoustic prime mover (sound generator), which was designed with the quarter-wave resonant tube. The working fluid was air under the barometric pressure. This study proves function of the prime mover, and demonstrates variety of experimental methods for experimental investigation of the thermoacoustics: acoustic measurements (the resonant frequency, power spectrum, and sound pressure level), temperature measurement (temperatures along the resonant tube, namely near the thermoacoustic stack), hot-wire measurement (oscillation velocities and displacements), and optical experiments by the holographic interferometry.
|
|
|
Thermoakustic prime Mover – demonstrace a první experimenty
Chen, Y.-C. ; Vít, T. ; Lédl, Vít ; Kordík, Jozef ; Maršík, František ; Wang, A. B. ; Doleček, R. ; Trávníček, Zdeněk
The present paper focuses on an experimental investigation of the thermoacoustic prime mover (sound generator), which was designed with the quarter-wave resonant tube. The working fluid was air under the barometric pressure. This study proves function of the prime mover, and demonstrates variety of experimental methods for experimental investigation of the thermoacoustics: acoustic measurements (the resonant frequency, power spectrum, and sound pressure level), temperature measurement (temperatures along the resonant tube, namely near the thermoacoustic stack), hot-wire measurement (oscillation velocities and displacements), and optical experiments by the holographic interferometry.
|
|
| |
guest ::
