|
Early stage microstructure development of cement paste modified by crystalline admixture
Hrbek, V. ; Petráňová, Veronika ; Němeček, J.
This paper deals with the effect of crystalline admixture (CA) on the microstructure of the cementitious composite in first four weeks after the production. Previous investigation was performed on reference specimens consisting of pure cement. Samples of pure CA and cement modified by 1% of CA with the same w/c ratio were examined and compared in this paper. By investigation of these materials on the micro-scale, it is possible to identify the development of the microstructure of each and determine the impact of the modification. For this purpose, backscattered electrons microscopy (BSE) with energy-dispersive X-ray spectroscopy (EDX) was used for phase analysis as well as instrumental nano-indentation to obtain micro-mechanical properties. Presented results show the evolution of mechanical properties and microstructure in time and the impact of the crystalline admixture on modified cement.
|
| |
| |
|
Experimentální studium rozpouštění popílku z metalurgie Cu v tropické půdě
Petráňová, Veronika ; Ettler, Vojtěch (vedoucí práce) ; Kříbek, Bohdan (oponent)
Pomocí laboratorního nádobového experimentu byla zjišťována časová závislost uvolňování kontaminantů z antropogenních popílků z metalurgie Cu do půdních roztoků a půdy. V experimentu byly použity popílky pocházející ze dvou různých Cu hutí v oblastech Mufulira a Chambishi (Copperbelt, Zambie). Experimentální sáčky s popílkem o navážce 0,5 g byly vloženy do 200 g lateritické půdy a zavlažovány deionizovanou vodou. Půda byla po celou dobu experimentu udržována při 80 % nasycení vodou. Pomocí lysimetrů zn. Rhizon bylo v časovém intervalu 504 h provedeno celkem 10 odběrů půdních roztoků, které byly následně analyzovány. Na základě výsledků byly v půdních roztocích určeny hlavními kontaminanty prvky Co, Cu a Zn. Časová závislost uvolňování Co a Cu do půdních roztoků C (půdní roztoky s popílkem z Chambishi) i M (půdní roztoky s popílkem z Mufuliry) vykazovala stejný trend, kdy koncentrace těchto prvků dosáhly v půdních vodách své maximální hodnoty během prvních 48 a 216 h a poté mírně klesaly až do konce experimentu. Koncentrace Zn v půdních vodách C a M rostla během prvních 24 a 144 h a poté začala klesat. Olovo se do půdních vod příliš neuvolňovalo, docházelo zřejmě k vazbě na půdní částice. Spolu s kovy se do půdních vod uvolňovalo i značné množství SO42-, které mělo významný vliv na speciaci...
|
| |
|
Deformation characteristics of chopped fibre composites subjected to quasi-static tensile loading
Šleichrt, J. ; Adorna, M. ; Neühauserová, M. ; Fenclová, N. ; Petráňová, Veronika
This work presents deformation behaviour of cost effective chopped fiber composites. Use of chopped fibre is advantageous for manufacturing however complex shape parts production technology could be challenging. Batches of samples with different fibres composition were subjected to uni-axial tensile loading to obtain overall materials properties and inspection of proper manufacturing based on local deformation inhomogeneities. Both crossbeam displacement and optical strain measurement were used for elastic characteristics evaluation. Deformation response was derived from full-field optical strain measurements based on digital image correlation method. Relatively large variation of mechanical properties testing of samples was found.
|
| |
|
Comparison of optical methods for characterization of glass mosaic weathering
Kocour, Vladimír ; Petráňová, Veronika ; Valach, Jaroslav
The work presented in this paper is a part of research project supported by Ministry of Culture and devoted to conservation of precious mosaic of 'Last Judgement' on St. Vitus Cathedral in Prague. The aim of the project is to enhance external protective polymeric coating on glass tesserae of mosaic and also to develop optical method for assessment of coating’s surface conditions. The paper concentrates on comparison of various methods for surface evaluation assesses their advantages and disadvantages and also discusses their suitability for long term monitoring of coating state, namely reflectometry, scanning probe microscopy, nanoindentation, white-light interferometry, and scanning electron microscopy. It is found that white-light interferometry and reflectometry methods are the most suitable ones for monitoring purposes.
|
| |
| |