|
|
THE APPLICATION OF NANOMATERIALS FOR LEAD FREE SOLDERS DEVELOPMENT
Pešina, Zbyněk ; Pinkas, Jiří (referee) ; Spousta, Jiří (referee) ; Sopoušek, Jiří (advisor)
The present dissertation is motivated by the search for alternatives of lead-free soldering by nanoparticles of metals and their alloys. The research focuses on the possibility of replacing lead-free solders by nanoparticles. This issue is currently being addressed by the use of lead-free solders but their properties are not entirely equivalent to properties of lead-tin based alloys. The theoretical part of the dissertation first summarizes up-to date knowledge on the development of lead-free alloys currently used for soldering in the electronics. The work compares these lead-free solder candidates with previously used Pb-Sn alloys. The second section of the theoretical part is devoted to nanotechnology that offers possible solutions of problems associated with the use of lead-free solders. The text contains a description of the properties of nanocrystalline materials in comparison with those of compact alloys having the same chemical composition. The possibility of preparation of nanoparticles and potential problems associated with small particle sizes are also presented. Introduction of the experimental part focuses on the preparation of nanoparticles of pure metals and alloys by chemical and physical ways as well as on an instrumentation for characterisation and analysis. Attention is focused on the silver in nanoparticle form that exhibits the low temperature sintering effect, which is thermally activated by decomposition of oxide envelope covering the Ag nanoparticles. This factor is critical for low-temperature sintering and thus also for possible future applications. The thermal effects of the low sintering process were studied by methods of thermal analysis. The preparation of the Cu / Ag nano / Cu joints was carried out in-situ in inert atmosphere and under the action of atmospheric oxygen. In both cases varying conditions of thermal treatment were used. The cross sections of the prepared joints were then used for the metallographic analysis of the local mechanical properties of the resulting silver layer, for the chemical composition evaluation of the resulting layers of the joint, and for the microstructure study. Strength characteristics are represented by testing shear strength of individual joints.
|
|
|
Analysis of Strain - induced Variations of Phase Composition of the TRIP Steel using EBSD Method
Pešina, Zbyněk ; Pantělejev, Libor (referee) ; Man, Ondřej (advisor)
The diploma thesis deals with phase composition measurement of the TRIP steel, using EBSD method. The steel was delivered as thermo-mechanically treated via two different routes. The phase composition of the steel was examined during gradual plastic deformation in the range 0 to10.99%. One route of thermo-mechanical treatment exhibited good agreement with the literature in terms of measured fraction of the retained austenite (15.6%) as well as its decrease during the deformation (to 8.9% at the maximum imposed strain). The samples of the second route did not show any agreement in either of the parameters spoken.
|
|
| |
|
|
THE APPLICATION OF NANOMATERIALS FOR LEAD FREE SOLDERS DEVELOPMENT
Pešina, Zbyněk ; Pinkas, Jiří (referee) ; Spousta, Jiří (referee) ; Sopoušek, Jiří (advisor)
The present dissertation is motivated by the search for alternatives of lead-free soldering by nanoparticles of metals and their alloys. The research focuses on the possibility of replacing lead-free solders by nanoparticles. This issue is currently being addressed by the use of lead-free solders but their properties are not entirely equivalent to properties of lead-tin based alloys. The theoretical part of the dissertation first summarizes up-to date knowledge on the development of lead-free alloys currently used for soldering in the electronics. The work compares these lead-free solder candidates with previously used Pb-Sn alloys. The second section of the theoretical part is devoted to nanotechnology that offers possible solutions of problems associated with the use of lead-free solders. The text contains a description of the properties of nanocrystalline materials in comparison with those of compact alloys having the same chemical composition. The possibility of preparation of nanoparticles and potential problems associated with small particle sizes are also presented. Introduction of the experimental part focuses on the preparation of nanoparticles of pure metals and alloys by chemical and physical ways as well as on an instrumentation for characterisation and analysis. Attention is focused on the silver in nanoparticle form that exhibits the low temperature sintering effect, which is thermally activated by decomposition of oxide envelope covering the Ag nanoparticles. This factor is critical for low-temperature sintering and thus also for possible future applications. The thermal effects of the low sintering process were studied by methods of thermal analysis. The preparation of the Cu / Ag nano / Cu joints was carried out in-situ in inert atmosphere and under the action of atmospheric oxygen. In both cases varying conditions of thermal treatment were used. The cross sections of the prepared joints were then used for the metallographic analysis of the local mechanical properties of the resulting silver layer, for the chemical composition evaluation of the resulting layers of the joint, and for the microstructure study. Strength characteristics are represented by testing shear strength of individual joints.
|
|
|
Analysis of Strain - induced Variations of Phase Composition of the TRIP Steel using EBSD Method
Pešina, Zbyněk ; Pantělejev, Libor (referee) ; Man, Ondřej (advisor)
The diploma thesis deals with phase composition measurement of the TRIP steel, using EBSD method. The steel was delivered as thermo-mechanically treated via two different routes. The phase composition of the steel was examined during gradual plastic deformation in the range 0 to10.99%. One route of thermo-mechanical treatment exhibited good agreement with the literature in terms of measured fraction of the retained austenite (15.6%) as well as its decrease during the deformation (to 8.9% at the maximum imposed strain). The samples of the second route did not show any agreement in either of the parameters spoken.
|
|
| |
guest ::
RSS feed.