|
| |
|
|
Industrial building
Nitková, Jana ; Buchta, Stanislav (referee) ; Sýkora, Karel (advisor)
The bachelor thesis contains design of steel one-aisle industrial building with span 24 m, lenght 63 m and height of the holder of a crane track girder 8,7m. There are two overhead cranes with load capacity 12,5 tons and 32/8 tons in industrial building. The structural material hall is made of steel S 235. The drawings includes transverse and longitudinal section, platform and manufacturing drawing of continuous truss.
|
|
|
Multipurpose Sport Building
Trávníček, Jakub ; Bukovská, Pavla (referee) ; Buchta, Stanislav (advisor)
This thesis deals with the design of the construction of multipurpose sport building. Hall ground plan dimensions are 30 x 48 m. Height of the hall is 17 m. Sports building is designed in the Brno locality.The load - carrying construction system consistis of a transversal truss beams composed of tube profiles.Transversal beams are supported by joint bearings. The calculation was done in the Scia Engineer software.
|
|
|
The manufacuring hall in Louny
Jirásek, Marek ; Buchta, Stanislav (referee) ; Šmak, Milan (advisor)
The aim of the bachelor thesis is design and assessment of the factory building in Louny. The hall has rectangular floor plan 68x30m. The supporting structure of the hall is designed as a steel frame with roof truss, purlins and braces for attachment of sheatling.
|
|
|
Multipurpose Sport Hall
Rusoňová, Nikola ; Hron, Lukáš (referee) ; Buchta, Stanislav (advisor)
Subject of this thesis is to design and evaluate the multipurpose sports hall for a permanent,climate and traffic load. Light range of construction is 42,900 m, clear height at its highest point is 10,824 m. The construction is located in Brno. The main load-bearing elements of constructionare two-juncture arcs of constant cross-section of glued laminated timber class GL24h, axially remote 3,000 m. Trusses are transversely connected by purlins from solid wood for strengthclass C20 axially remote 1,100 m. The entire construction is braced by four transverse bracing,consisting of a rods system.
|
|
|
Structure of The Showroom
Trojanová, Lenka ; Röder, Václav (referee) ; Buchta, Stanislav (advisor)
This thesis describes the design of wooden substructures Motor Show. This constructionis located in South Moravia in Brno area. The dimensions are 33 mx 49 m and height from ground to top is 15.5 m The main structure is unbalanced arc of glued laminated timber, constant section height. Length of the arch is 39 meters. For the design of bearings, connections and contacts have been used steel elements. The concrete columns are stored using the arc tangent bearings. Front and side (east) side have a glass facade, glass is the antisun and security properties are opposite sides of the brickPOROTHERM 40th The structure was modeled in the SCIA ENGINEER 2011th The structural analysis was performed manually.
|
|
|
Two Bay Industrial Hall
Hetmer, Jakub ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
This bachelor´s thesis "two-bay industrial hall" is processed in the form of project documentation according to applicable regulations. It is a steel hall. It is designed as a single-storey, two-bay with a gable roof. The hall is located in Brno. Main structure consists of planar cross coupling, which is stored on restraint articulated columns. The construction is designed 9 cross ties and spacing of individual bonds is 6.0 m in the extreme lateral links are hinged mounted columns with stored axial length 6.0 m, which are secured lattice bracing longitudinal forces from the effects of wind. All columns are stored on concrete footings. In the longitudinal direction of the object is reinforced by transverse glue press in the plane of the roof and walls. Lateral bracing is located in the outer fields of the structure. Purlins and side runner are statically designed as simple beams, stored in the longitudinal direction of the transverse links and columns.
|
|
|
The Three Aisled Storage Building
Šramota, Petr ; Bajer,, Miroslav (referee) ; Buchta, Stanislav (advisor)
The main aim of this bachelor thesis is designing free-aisled manufacturing hall situated in Frýdek-Místek. In the proposition is solved variantion with central nave wide 12 m conncted to outer naves wide 9,0 m. Total lenght is 120 m. Support system of the central and outer naves is formed by lattice cross-links, which are composed rolling section saved on fixed columns. The calculation was done through the use of SCIA Engineer 2008 program andy by myself alone.
|
|
| |
|
| |
guest ::
