| |
|
Application of partial reliability factors for safety assessment of dams
Szarowski, Marcin ; Adam, Karel (referee) ; Špano, Miroslav (advisor)
The diploma thesis deals with an application of partial reliability coefficients of reliability in assessing the safety of water works. The reliability factors are the quantitative condition of the marginal equilibrium. A more detailed study of the methods of the marginal equilibrium method led to an assessment of the overall and local stability of the Vranov Dam. The baseline for the evaluation were the data provided by the Technical Surveillance (TBD) and available literature. The GeoStudio 2018 was used to calculate the loads on the Vranov waterworks. The model of the groundwater flow in the subsoil was calculated by the Seep/W module and the Sigma/W module was used to determine the local stresses. Subsequently, the selection of partial reliability coefficients and theirs subsequent application to the limit equilibrium conditions were performed. Stability assessments were complemented by calculations of safety factors. The results were compared with each other.
|
| |
|
Assessment of the Options of Increased the Flood Protection
Adam, Karel ; Golík,, Pavel (referee) ; Uhmannová, Hana (advisor)
The work deals with the assessment of the stream Chribska Kamenice current state in the village Vsemily urban area. The aim of the project is the assessment of capacity and the current state of the stream-bed. Based on an assessment measure there has been designed the improvement suggestion of the current state and flood protection increasing in close neighbourhood.
|
|
Welding head of the longwall shearer
Adam, Karel ; Sigmund, Marian (referee) ; Kubíček, Jaroslav (advisor)
The aim of this bachelor thesis is to describe the structure and purpose of the longwall shearer drum to descriebe the technological process and to design the technology. Shearer heads are made by welding, MAG method with a protective atmosphere of CORGON 18 (18% CO2 + Ar) was selected. Increasing the strength of the knife holders, made from steel 15 230.3 to 1600MPa and welding to the helical segment of S355J2 + N steel, these clamps cracked cold. An error has been detected by reviewing the entire process and performing calculations. The preheating temperature was too low and was therefore increased to 270 ° C along with the stay for 2 hours at this temperature. Part of the thesis is a sample of the test weld of the rupture holder.
|
|
Welding head of the longwall shearer
Adam, Karel ; Sigmund, Marian (referee) ; Kubíček, Jaroslav (advisor)
The aim of this bachelor thesis is to describe the structure and purpose of the longwall shearer drum to descriebe the technological process and to design the technology. Shearer heads are made by welding, MAG method with a protective atmosphere of CORGON 18 (18% CO2 + Ar) was selected. Increasing the strength of the knife holders, made from steel 15 230.3 to 1600MPa and welding to the helical segment of S355J2 + N steel, these clamps cracked cold. An error has been detected by reviewing the entire process and performing calculations. The preheating temperature was too low and was therefore increased to 270 ° C along with the stay for 2 hours at this temperature. Part of the thesis is a sample of the test weld of the rupture holder.
|
| |
|
Application of partial reliability factors for safety assessment of dams
Szarowski, Marcin ; Adam, Karel (referee) ; Špano, Miroslav (advisor)
The diploma thesis deals with an application of partial reliability coefficients of reliability in assessing the safety of water works. The reliability factors are the quantitative condition of the marginal equilibrium. A more detailed study of the methods of the marginal equilibrium method led to an assessment of the overall and local stability of the Vranov Dam. The baseline for the evaluation were the data provided by the Technical Surveillance (TBD) and available literature. The GeoStudio 2018 was used to calculate the loads on the Vranov waterworks. The model of the groundwater flow in the subsoil was calculated by the Seep/W module and the Sigma/W module was used to determine the local stresses. Subsequently, the selection of partial reliability coefficients and theirs subsequent application to the limit equilibrium conditions were performed. Stability assessments were complemented by calculations of safety factors. The results were compared with each other.
|
|
Assessment of the Options of Increased the Flood Protection
Adam, Karel ; Golík,, Pavel (referee) ; Uhmannová, Hana (advisor)
The work deals with the assessment of the stream Chribska Kamenice current state in the village Vsemily urban area. The aim of the project is the assessment of capacity and the current state of the stream-bed. Based on an assessment measure there has been designed the improvement suggestion of the current state and flood protection increasing in close neighbourhood.
|
| |