|
|
Data analysis from moving vehicle
Kvapil, Josef ; Šedivá, Soňa (referee) ; Havlíková, Marie (advisor)
The thesis deals with data analysis obtained from the traffic simulator. The data are from trajectory of vehicle movement. The analysis are suggested to driving trajectory which are obtained from the characteristic parameters for the subsequent detection of the critical vehicle position. Analysis and evaluation of the detection critical vehicle position are solved in the Matlab program scripts.
|
|
|
Measurement of Level by Fiber Optic Sensors
Bednář, Tomáš ; Havránek, Zdeněk (referee) ; Šedivá, Soňa (advisor)
The subject of this master‘s thesis is the issue of design of fiber optic sensor for min/max and continuous measurement of liquid level, which could be used for laboratory measurement of optoelectronics. The thesis is divided into the three parts, the first part deals with methods of retrieval level measurement using fiber optic sensors. The second part is made of plant design of optical fiber sensors, it is shown the implementation of measuring devices for liquid level measurement and measured transfer characteristics of the sensors developed. The last part is proposed for laboratory typing tasks using established preparation for teaching in the subject Optoelectronic sensors.
|
|
|
Flow measurement of air by multiport averaging probes
Šimák, Jakub ; Uher, Miroslav (referee) ; Šedivá, Soňa (advisor)
Master work deals with the measurement of fluid flow (particularly air) pipe, with orifice and multiport averaging probe. The theoretical part is followed by practical, which verifies the properties of the measured system. In a next part of semestral work are verifies the properties of multiport averaging probes Vavra s.r.o. MQS-011 and Rosemount Annubar 485. Measured values from probes are compared.
|
|
|
Laboratory equipment for speed measurement
Zikmund, Jiří ; Šedivá, Soňa (referee) ; Beneš, Petr (advisor)
This thesis deals with speed measuring and speed measurement sensors. It’s designed equipment for the demonstration of the sensors principle. In the next part it’s designed the assignment for BMFV lesson, it’s made the measuring on this equipment and the exemplary protocol is elaborate.
|
|
|
Software for measuring track
Pikula, Stanislav ; Tomáš, Zůbek (referee) ; Šedivá, Soňa (advisor)
The master's thesis summarizes the theory of flow measurement by differential pressure sensors, especially by Normalized Orifice, and summarizes theory concerning Averaging Pitot Tube. It is briefly described LabVIEW programming environment and flow measuring track for which the software was developed. The thesis describes creation of concept of program and in particular its final realization. The program provide observing actual events on measuring track, saving data to file, detail analysis of stored data and creation of measurement report. The main objective is to determine the Averaging Pitot Tube coefficient.
|
|
|
Analog I/O card with Ethernet
Pelikán, Radek ; Šedivá, Soňa (referee) ; Bradáč, Zdeněk (advisor)
The aim of my master‘s thesis was design of analog measuring card with generator and Ethernet interface, based on RCM3200 Rabbit Core module. I described this module, introduced the conception and the design of the measuring card. In appendix I stated design of schematic, design of board. I tested functionality of the measuring card.
|
|
|
Thermal imagers in technical diagnosis
Haltuf, Martin ; Šedivá, Soňa (referee) ; Bejček, Ludvík (advisor)
In this thesis is dealed the technical term diagnostic with Fluke Ti55 thermo imager. In the introduction of description is analyzed noncontact temperature measurement including principle, uncertainties measurement and measurement system. In other parts of the work is focused on thermal imaging, termogram, description Fluke Ti55 termo imager and measurement of mechanical stress. The concluding part of the description and processing of measurements, including their evaluation.
|
|
|
Thermal imagers in technical diagnosis
Haltuf, Martin ; Šedivá, Soňa (referee) ; Bejček, Ludvík (advisor)
In this thesis is dealed the technical term diagnostic with Fluke Ti55 thermo imager. In the introduction of description is analyzed noncontact temperature measurement including principle, uncertainties measurement and measurement system. In other parts of the work is focused on thermal imaging, termogram, description Fluke Ti55 termo imager and measurement of mechanical stress. The concluding part of the description and processing of measurements, including their evaluation.
|
|
|
Diagnosis of metallic materials
Buday, Matej ; Šedivá, Soňa (referee) ; Bejček, Ludvík (advisor)
This thesis deals with non-destructive testing (NDT). It Describes two basic thermographic methods, lock-in and pulse thermography. Different types of measurements using Fluke Ti55, points to the possibility of applying these methods in practice. Pulse thermography issue is a substantial part of this work, due to its good applicability. Also, it compares visual testing methods (VIS) and pulse thermography due to measurement with die-casting alloy AC-AlSi9Cu3 (Fe).
|
|
|
Funktions of Spectrum Analyser N1996A-503
Šoukal, David ; Šedivá, Soňa (referee) ; Havlíková, Marie (advisor)
The theme of this diploma work is to introduce spectrum analzyer Agilent CSA N1996A to readers. In the work there are explained in detail all measuring functions of this machine, there are also mentioned all engineering characteristics and described all operating elements of this machine. In the diploma work is also mentioned the basice division of spectrum analyzers and their principles of activity. In the pracical part there are proposed the measurement assignments for hearers of subject MEMT, where is the possibility to use already mentioned spectrum analyzer. Including of the assignments there are also theoretical analysis of each assignment, their diagrams of wiring, practical metering and interpretation of results.
|
guest ::
RSS feed.