| |
|
Pultrusion process of composite based on flax fibres
Hahn, Filip ; Poláček, Petr (referee) ; Přikryl, Radek (advisor)
Theoretical part of master's thesis is focused on chemical treatments of natural fibers and their use as reinforcement material in polymer composites. Flax fibers were treated with two different silane coupling agents to improve their adhesion with polymer matrix. Nature of treatment was studied by using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). Composites based on both treated and untreated flax fibers were prepared by pultrusion.technique. Mechanical properties and water absorption of prepared composites were evaluated.
|
|
Analysis and modification of thin layers using ion beams
Jonner, Jakub ; Lörinčík, Jan (referee) ; Bábor, Petr (advisor)
This diploma thesis deals with analysis and modification of thin layers using ion beams. The first part of this diploma thesis deals with phenomena accompanying ion beam bombardment of solid matter. The second part of this diploma thesis is concerned with Secondary Ion Mass Spectroscopy (SIMS) and Low Energy Ion Scattering (LAIS). This work convey some basic information about these two techniques and it also deals with some benefits result in their connection into parallel depth profiling mode (such as better depth resolution of the LEIS profile, quantification of the SIMS). These benefits are demonstrated on MoSi film measurement. Within the framework of this thesis a new UHV manipulator was designed. This new UHV manipulator is equipped with precise stepper UHV motor and since the proportions are smaller, the manipulation with a sample in a space limited UHV chamber is much more comfortable and more precise. The third part of this diploma thesis deals with ion-beam induced transformation of epitaxially grown Fe films with thickness of 22 monolayer (ML) and 44 ML on Cu(100) single crystal at room temperature. Metastable Fe films of 22 ML thickness were prepared in CO pressure and 44 ML Fe films were prepared by co-evaporation of Fe with Fe64Ni36 (invar). Structural changes are analyzed by scanning tunneling microscopy and low-energy electron diffraction. The aim of this thesis is to discuss the influence of the sputtering parameters such as ion dose and ion energy on the nucleation of bcc nanocrystals, their growth, final shape and size. The influence of different Ni concentration on stability of 44 ML thick Fe films is also discussed.
|
|
Quality of hydrophobic domains in polyelectrolyte-surfactant system
Holínková, Petra ; Vala, Martin (referee) ; Mravec, Filip (advisor)
In this bachelor thesis were studied the photophysical properties of four fluorescent probes depending on the viscosity of their surroundings by the fluorescence spectroscopy. For probes DPH, DPB a perylene was determinated dependence of fluorescence anisotropy and for P3P dependence of ratio excimer/monomer on the viscosity of the sample. Anisotropy probes DPH and perylene were also used to study interaction between hyaluronan and cationic surfactant CTAB (concentration below CMC) in aqueous solution and 0,15 M NaCl. Information about forming hydrophobic domains were obtained by measurement of fluorescence intensity and anisotropy depending on the concentration of CTAB in the sample. It was found that in an aqueuos solution, after the initial addition of CTAB to hyaluronan formed small hydrophobic domains linked to chain of hyaluronan. Increasing concentration of CTAB leads to the formation of gel and phase separation. After addition of NaCl leads to reorganization of this system and probably the formation of free micelles in the solution with higher concentration of CTAB.
|
| |
|
Izotopicky značené peptidy poskytující rozlišená strukturní data pomocí infračervených specter. Strukturní limity optické spektroskopie
Keiderling, T. A. ; Huang, R. ; Kubelka, J. ; Bouř, Petr ; Setnička, V. ; Hammer, R. P. ; Etienne, M. A. ; Silva, R. A. G. D. ; Decatur, S. M.
Isotopic labeling, here exemplified by 13C substitution on the amide C=O group, can allow site-specific determination of peptide conformation with IR. Examples of helix and sheet (beta-hairpin) structures are reviewed.
|
|
Analysis of Iron-Phosphorus Reaction Products Formation During Heat Treatment Processes
Skoumalová, Zuzana ; Jan, Vít (referee) ; Doležal, Pavel (advisor)
During high pressure pulsation tests repeated cracks of CP3. housings occur. High pressure pump CP3 is part of injection system Common Rail. Cracks can be caused by segregation of phosphorous from a washing medium on grain boundaries during subsequent heat treatment process. The present master´s thesis focuses on analysis of phosphorous compounds on specimen surface made from steel 20MnCr5, which were soaked in solutions with different concentration of phosphorous. Master’s thesis is also focused on potencial influence of phosphorous on structure and properties of this material. The first part of the thesis provides a summary of current knowledge in the studied field, experimental results can be found in the second part. The surface analysis XPS, the light microscopy, the scanning electron microscopy equipped by energy dispersive chemical analysis, the glow discharge optical emission spectroscopy, the methods of the phase analysis by means of the X-ray diffraction and impact test were used.
|
| |
|
Ab initio studie Lavesových fází v systémech Fe-Cr, Fe-Mo a Fe-Ta
Houserová, Jana ; Šob, Mojmír
Binary systems Fe-Cr, Fe-Mo and Fe-Ta can be found in many kinds of steels where the Laves-phase can be considered as a potential candidate for strengthening provided size and distribution of the particles are within certain limits. We performed electronic structure calculations to study the thermodynamic and structural properties of the C14 Laves phase with various compositions. In the frame of the thermodynamic study, we have evaluated the total energies of formation of Laves phase structure with different occupations of sublattices (Fe2Fe, Fe2X, X2Fe, X2X, where X stands for Cr, Mo and Ta) with respect to the Standard Element Reference (SER) states. These energies of formation are of great importance for prediction of stability of studied configurations.
|
|
Study of phenolic compounds in some biologic materials using method LC/MS
Měřínská, Radana ; Zemanová, Jana (referee) ; Kočí, Radka (advisor)
Presented bachelor thesis was focused on suitable methods for analysis of phenolics, especially modern instrumental methods were studied. In experimental part some standard phenolic compounds were analysed using combined technique HPLC/ESI-MS with off-line and/or on-line detection. Mass spectra of individual stadards and/or mixtures were determined in MS full scan and/or MS/MS full scan mode. Ionisation of chosen standard compounds was done in pozitive and/or negative mode. Parent ions of followed compounds were identified: reserpine (PI 609.9, NI 607.7), acid chlorogenic (NI 353), quercetin (PI 303.5, NI 301.5), rutin (PI 611, NI 609), morin (PI 303.1, NI 301.1). Typical fragments of studied standards were produced using MS/MS full scan mode. By fragmentation characteristic product ions were identified: acid chlorogenic (NI 191), quercetin (PI: 229.1 and 257.1; NI: 179.0 and 151.0), rutin (in MS/MS NI: 301; in MS3 NI: 179, 151.1), morin (PI: 285.1 a 257.1; NI: 283.2, 273.2, 257.1, 229.1). Optimal conditions of phenolic HPLC separation were determined including gradient elution and Restek column use. In conclusion on-line HPLC/MS detection using negative ionization was observed as the best configuration for phenolic analysis.
|
guest ::
