| |
|
Urbanization in China: Sustainability of Chinese Cities
Králíková, Petra ; Stuchlíková, Zuzana (advisor) ; Neumann, Pavel (referee)
The aim of the master thesis is to characterize development trends of Chinese urbanization since the establishment of People´s Republic of China until today, approaches to these trends and evaluate their sustainability. Thesis includes four main parts. The first part introduces main urbanization theories: Stages of Urban Development, Differential Urbanization, and Environmental Kuznets Curve. The second part characterizes the development of Chinese urbanization, defines two main determinants of the future development and tries to cover different potential future scenarios. The third part deals with Chinese urban policies, such as five-year-plans, Urbanization plan and reforms. After that, the sustainability issue is evaluated. Last part of the thesis deals with urbanization trends and policies in Chongqing municipality.
|
|
Products with Protected Designations of the European Union and Their Position in Regional Tourism
Licková, Kamila ; Kalábová, Markéta (advisor) ; Abrhám, Josef (referee)
The master thesis deals with products with protected designations of the European Union. The main objective of the master thesis is to evaluate the importance of the chosen product with protected designation of the EU in regional tourism and analyse the perception of the product by a producer and by tourists. The sub-objective is the description of the European system of food labelling. The thesis is divided into five main chapters. The first part explains basic concepts which are related to the thesis. The second chapter introduces the best known food quality labels. Greater attention is devoted to the description of the food protection system of the EU. The third chapter deals with the characteristics of the chosen region Beskydy-Wallachia. The second part of this chapter is focused on the chosen protected product Štramberské uši. The forth chapter includes a structured interview with the chosen producer of Štramberské uši and a survey research, which was conducted in two phases. The last chapter contains the evaluation of the implemented survey. The main finding of this thesis is the fact that a relatively high percentage of respondents know the product Štramberské uši. An interesting finding is the fact that only a small portion of them know that the product Štramberské uši is the holder of the protected designation of the European Union. The chosen producer of Štramberské uši sees the main benefit of the label in greater publicity. Among problems he ranks the enforceability of the label and lack of general promotion of Štramberské uši.
|
|
The impact of South China Sea dispute on trade relations between China and Vietnam
Nguyen Hong, Viet ; Vlčková, Jana (advisor) ; Hasík, Gabriel (referee)
This bachelor thesis investigates the impact of South China Sea dispute on mutual relations between China and Socialist Republic of Vietnam. Thesis lays great emphasis on the analysis of mutual trading relations. The goal of this work is to find out if the dispute over territory has negative influence on mutual relations and to what extent. Therefore, thesis is divided into 3 main chapters. The introductory chapter describes position and development of each country. Second chapter uses findings from the introductory part for the analysis of political and trade relations of both countries. It focuses on the history of mutual relations and mainly it lays emphasis on current mutual relations. Last chapter of the thesis is dedicated to the issues regarding South China Sea. Motives and causes of this dispute are described in this chapter. It provides a view on the course of this territorial dispute, and also impacts on mutual relations are analyzed. The output of all three chapters helps to formulate following conclusion. Dispute over South China Sea has impact on mutual relations. Predominantly, it influences political relations between China and Vietnam, therefore, this dispute is often mentioned in media. However, according to available data this dispute has not had major effect on trading relations. Mutual trading between both countries went off in dispute period without any limitations and barriers.
|
|
Progress, outcome, future scenarios and threats of multilateral trading system (WTO)
Kozáková, Michaela ; Štěrbová, Ludmila (advisor) ; Trojanová, Kamila (referee)
This diploma thesis aims to set a complex view on the current process of multilateral trade agreements under the World Trade Organization and point out the direction of DOHA negotiations. The emphasis is put on the Tenth Ministerial Conference, which took place in Nairobi in December 2015. Stances and demands of the WTO member are analysed step by step. The thesis considers threats that possibly come from plurilateral, bilateral and regional agreements and evaluate a potential risk for the multilateral trading system. For this purpose, the thesis is divided into four chapters. First chapter examine theoretical introduction to WTO and particularly to Development Doha Agenda, which is important for subsequent understanding of actual issues. Second part analyses in detail the negotiations in main negotiating parts of DDA before and after a summer break. Following chapter fluently continues with analyse of the progress after summer break and points out some current questions about preparations for MC10 and expectations. Space is also given to the MC10 and its outcomes. Finally, the last chapter gives a thought to future scenarios concerning function of the WTO.
|
|
Comparison of Business Intelligence implementation using open source solutions for middle size companies
Schmidt, Róbert ; Maryška, Miloš (advisor) ; Sládek, Pavel (referee)
The main goal of master thesis is to analyze and propose possible low cost Business Intelligence solution with open source technologies and comparison of available tools for implementation in middle size company. We compare Pentaho and Jaspersoft tools implemented on local hardware and cloud environment with Microsoft Azure services. The theoretical part focuses mainly on understanding the business intelligence and its architecture, because architecture is an important part of the work. Actual tools are designed as stand alone modules for specific activities in the business intelligence lifecycle. Low cost tools are often connected with open source technologies and cloud computing. This part of the work contains explanation of these terms and their advantages and disadvantages for our chosen target group of companies. The analytical part includes defined parameters by which it is conducted analysis of tools and their comparison. Business Intelligence solutions are divided according to arcitectural layers. The evaluation criteria are divided into financial, technical and user category. In conclusion, chosen tools are compared and evaluated. The main contribution of this thesis is comparison of open source business intelligence tools for implementation in middle size company. According to the EU directive, middle size company does not exceed 250 employees or profit is less than 50 million euros. The reader can compare the different solutions and their pitfalls or shortcomings that could be critical for the implementation.
|
|
Effect of low doses of herbicide paraquat on antioxidant defense in Drosophila
SÁBOVÁ, Michala
Disruption of cell equilibrium between production of free radicals and antioxidant defence is named oxidative stress. The main component of antioxidant mechanism is activity of antioxidant enzymes, which include superoxide dismutase (SOD) and catalase. In this study we evaluated the effect of herbicide paraquat on response of SOD and catalase, their transcription level and locomotion activity in Drosophila melanogaster. We exposed the flies to a wide range of paraquat concentration. Our results revealed that transcript and enzymatic levels of both SOD and catalase have a similar biphasic dose response with the peaks at 2,5 ?M paraquat concentration, resembling hormetic effect. Then, males were more sensitive than females. However, females had an increased locomotion activity. We found that paraquat susceptibility is increased in males and mating flies. Therefore, this study supports hypothesis of stress sensitivity elevation as a physiological cost of reproduction.
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
Optical low dispersion rezonator as length sensor using optical frequency comb
Pravdová, Lenka ; Hucl, Václav ; Lešundák, Adam ; Lazar, Josef ; Číp, Ondřej
Ultra-high precis measurements are domain of lasers interferometers. An optical resonator measuring method using broad spectrum of radiation of an optical frequency comb was designed and experimentally verified at our workplace. The measuring of a quantity – a distance of resonator mirrors – is provided by its conversion to the value of repetition frequency of the pulse laser with mode-locked optical frequency comb. In this paper the comparison of the absolute scale of the optical resonator with an incremental interferometer scale is introduced. The incremental interferometer is implemented for verification of the optical resonator scale. The double beam incremental interferometer is operating at the wavelength of 633 nm and the measuring mirror with piezo actuator is used as one of its reflectors. It turns out that the major error signal is the reflection of the periodic nonlinearity of the incremental resonator scale. The relative resolution of our method reaches values up to 10-9 while maintaining measuring scale.
|
| |
guest ::
