National Repository of Grey Literature 6 records found  Search took 0.00 seconds. 
Improvement Power Parameter of Small Induction Motors
Halfar, Tomáš ; Ondrůšek, Čestmír (referee) ; Hájek, Vítězslav (advisor)
The master’s thesis Improvement power parameter of small induction motors deals with issues of lowering the losses of small induction motors. The first part introduces with design and principles of operation of induction motors. Also introduces to theoretical problematic of losses, their lowering and measuring. In the practical part there are results of the measuring the losses in the induction motor ATAS Elektromotory Náchod a.s. T22VT512 (71-0512). There are proposed methods of increasing the efficiency of induction motor due to measuring and their verification in the Maxwell software. The last part is dedicated to measuring the losses of prototype motor from ATAS and comparison of results with previous motor.
DETERMINATION OF FLOW AND LOAD CHARACTERISTICS OF SURFACE FLAP GATES THROUGH PHYSICAL AND NUMERICAL MODELING
Picka, Daniel ; Možiešik,, Ľudovít (referee) ; Pochylý,, František (referee) ; Šulc, Jan (advisor)
The subject of research were effect of elevated water level in the downstream apron on the weir flow capacity and load characteristics of the flap gate. The thesis is focused on possibilities of physical and CFD modeling of flap gate weir flow. In the introduction are contained current condition of knowledge, perfomed model studies conducted in the Czech republic and abroad, as well as flap weirs realized in our country and in the world. This is followed by experimental physical research on family of weir structure models in scales 1:1 (prototype), 1:2 and 1:2.5. Options CFD simulations a flap gate weir are contained in chapter of CFD modeling. In conclusion are compared physical methods with CFD simulations on flap gate weir.
Study of life cycle of the accumulators
Babieska, Lukáš ; Binar, Tomáš (referee) ; Kazda, Tomáš (advisor)
This bachelor work deals with monitoring the life cycle of a lithium-ion battery. The theoretical part describes the history and development of electrochemical cells. Lithium-ion batteries are a separate chapter. There are described their principles, the most used materials for the production of negative and positive electrodes, loading characteristics and the influence of temperature. In the practical part, the influence of temperature on changes of internal impedance, cell capacity and efficiency of energy supply during the battery life cycle is monitored.
Study of life cycle of the accumulators
Babieska, Lukáš ; Binar, Tomáš (referee) ; Kazda, Tomáš (advisor)
This bachelor work deals with monitoring the life cycle of a lithium-ion battery. The theoretical part describes the history and development of electrochemical cells. Lithium-ion batteries are a separate chapter. There are described their principles, the most used materials for the production of negative and positive electrodes, loading characteristics and the influence of temperature. In the practical part, the influence of temperature on changes of internal impedance, cell capacity and efficiency of energy supply during the battery life cycle is monitored.
DETERMINATION OF FLOW AND LOAD CHARACTERISTICS OF SURFACE FLAP GATES THROUGH PHYSICAL AND NUMERICAL MODELING
Picka, Daniel ; Možiešik,, Ľudovít (referee) ; Pochylý,, František (referee) ; Šulc, Jan (advisor)
The subject of research were effect of elevated water level in the downstream apron on the weir flow capacity and load characteristics of the flap gate. The thesis is focused on possibilities of physical and CFD modeling of flap gate weir flow. In the introduction are contained current condition of knowledge, perfomed model studies conducted in the Czech republic and abroad, as well as flap weirs realized in our country and in the world. This is followed by experimental physical research on family of weir structure models in scales 1:1 (prototype), 1:2 and 1:2.5. Options CFD simulations a flap gate weir are contained in chapter of CFD modeling. In conclusion are compared physical methods with CFD simulations on flap gate weir.
Improvement Power Parameter of Small Induction Motors
Halfar, Tomáš ; Ondrůšek, Čestmír (referee) ; Hájek, Vítězslav (advisor)
The master’s thesis Improvement power parameter of small induction motors deals with issues of lowering the losses of small induction motors. The first part introduces with design and principles of operation of induction motors. Also introduces to theoretical problematic of losses, their lowering and measuring. In the practical part there are results of the measuring the losses in the induction motor ATAS Elektromotory Náchod a.s. T22VT512 (71-0512). There are proposed methods of increasing the efficiency of induction motor due to measuring and their verification in the Maxwell software. The last part is dedicated to measuring the losses of prototype motor from ATAS and comparison of results with previous motor.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.