|
|
Large-Surface Carbon Film Electrode - A Novel Sensor for Voltammetric Determination of Electrochemically Oxidizable Organic Compounds
Šmejkalová, Hana ; Vyskočil, Vlastimil (advisor) ; Dejmková, Hana (referee)
of the Diploma Thesis In this Diploma Thesis, the electrochemical behavior of 4-nitrophenol (4-NP) was studied at a newly prepared large-surface carbon film electrode (ls-CFE) using techniques of DC voltammetry (DCV) and differential pulse voltammetry (DPV) with the aim to develop sensitive analytical methods for its determination. Voltammetric behavior of 4-NP was investigated in the region of anodic potentials, in dependence on the pH of the medium used (realized using Britton-Robinson buffer). The optimum pH values for the determination of 4-NP were chosen as follows: pH 3.0 (for DCV) and pH 7.0 (for DPV). During anodic oxidation of 4-NP on the ls-CFE at the concentration of the analyte of 1·10-4 mol/l, the passivation of the electrode surface occurred. Thus, it was decided to record series of measurements always at a new carbon film. Using the sample of 4-NP (at the concentration of 1·10-4 mol/l), the repeatability of the application of individual carbon films was tested, with obtained RSD values of 3.7% and 3.6% for DCV and DPV, respectively. Under optimum conditions, the calibration dependences of 4-NP were measured in the concentration range from 1·10-6 to 1·10-4 mol/l, with the limits of quantification (LQs) of 1.5·10-6 mol/l (for DCV at the ls-CFE) and 4.6·10-7 mol/l (for DPV at the...
|
|
|
Detection of Oxidative Stress Using Electrochemical DNA Biosensors
Jurečková, Zuzana ; Vyskočil, Vlastimil (advisor) ; Fischer, Jan (referee)
Presented Diploma Thesis is focused on the development, characterization, and utilization of simple and inexpensive electrochemical DNA biosensor for the detection of DNA damage caused by oxidative stress. The initial part of the work is devoted to preparation and characterization of a large-surface carbon film electrode (ls-CFE) modified with carbon nanotubes (CNT/ls-CFE). Carbon nanotubes improve electrochemical properties of the transducer and increase the amount of adsorbed DNA on the electrode surface. Testing of the electrode surface modified with multiwalled carbon nanotubes (MWCNT) was performed using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) using a redox system [Fe(CN)6]4-/3- and using square wave voltammetry without any redox indicator. Carbon nanotubes have proved to be unsuitable material for our type of biosensor, but it can be used inanalytical chemistry for the determination of electroactive substances. The second part of this Thesis deals with the application of the prepared DNA biosensor for the detection of DNA damage by oxidative stress. The biosensor based on the ls-CFE was chosen for this purpose, having several advantages, such as its fast preparation, a simple mechanical renewal of the electrode surface, a good reproducibility of measurements,...
|
|
|
Novel Voltammetric DNA Biosensor for the Detection of the DNA Damage Caused by Oncological Drugs
Hrochová, Zuzana ; Vyskočil, Vlastimil (advisor) ; Zima, Jiří (referee)
This Bachelor Thesis is focused on the optimization of conditions for the use of a simple voltammetric DNA biosensor, based on a large-surface carbon film electrode (ls-CFE), for the detection of the DNA damage caused by oncological drugs. ls-CFE was used for its advantageous properties, such as its fast preparation, a simple mechanical renewal of the electrode surface, a good reproducibility of results, a simple chemical modification, and, last but not least, low preparation costs. A content of ethanol in the solution, in which the biosensor was incubated together with the damaging agent, was the main optimization parameter investigated in this Thesis. The contents of ethanol in the range from 0 to 50 % (v/v) of ethanol in 0.1 mol/l phosphate buffer of pH 7.15 (PBS) were tested. After the incubation of the biosensor, the measurements were performed using cyclic voltammetry (CV) in the presence of the redox indicator [Fe(CN)6]4-/3- in PBS. The optimum content of ethanol was found as 5 %. Afterwards, the DNA biosensor, which preparation was optimized in a previous Bachelor Thesis, was used for the detection of the DNA damage caused by model cytostatic agent - Ellipticine (5,11-dimethyl-6H-pyrido[4,3-b]carbazol). Using the CV technique and the redox indicator [Fe(CN)6]4-/3- , the response of the biosensor to...
|
|
|
Novel Electrochemical Biosensor for the Detection of DNA Damage Based on a Large-Surface Carbon Film Electrode
Jurečková, Zuzana ; Vyskočil, Vlastimil (advisor) ; Zima, Jiří (referee)
Presented Bachelor Thesis is focused on the development and utilization of a simple and inexpensive electrochemical DNA biosensor for the detection of DNA damage caused by chemical carcinogens. A large-surface carbon film electrode (ls-CFE), having several advantages, such as its fast preparation, a simple mechanical renewal of the electrode surface, a good reproducibility of measurements, an absence of problems connected with "electrode history", and simple chemical modification, was used for its preparation. The initial part of the work is devoted to the investigation of the composition of a carbon ink suspension, which was optimized and tested using a [Fe(CN)6]4-/3- redox system by cyclic voltammetry (CV), further to the optimization of the DNA biosensor (DNA/ls-CFE) preparation and to its characterization, which was performed using two electrochemical techniques - CV and electrochemical impedance spectroscopy (EIS). The second part of this Thesis deals with the application of the newly prepared DNA biosensor for the detection of DNA damage by model chemical carcinogens. The direct interaction of DNA with fluorene and 2-aminofluorene (2-AF) was investigated using CV and EIS at the DNA/ls-CFE. The obtained results confirmed that the interaction of DNA with fluorene and 2-AF causes DNA damage,...
|
|
|
Large-Surface Carbon Film Electrode - A Novel Sensor for Voltammetric Determination of Electrochemically Oxidizable Organic Compounds
Šmejkalová, Hana ; Vyskočil, Vlastimil (advisor) ; Dejmková, Hana (referee)
of the Diploma Thesis In this Diploma Thesis, the electrochemical behavior of 4-nitrophenol (4-NP) was studied at a newly prepared large-surface carbon film electrode (ls-CFE) using techniques of DC voltammetry (DCV) and differential pulse voltammetry (DPV) with the aim to develop sensitive analytical methods for its determination. Voltammetric behavior of 4-NP was investigated in the region of anodic potentials, in dependence on the pH of the medium used (realized using Britton-Robinson buffer). The optimum pH values for the determination of 4-NP were chosen as follows: pH 3.0 (for DCV) and pH 7.0 (for DPV). During anodic oxidation of 4-NP on the ls-CFE at the concentration of the analyte of 1·10-4 mol/l, the passivation of the electrode surface occurred. Thus, it was decided to record series of measurements always at a new carbon film. Using the sample of 4-NP (at the concentration of 1·10-4 mol/l), the repeatability of the application of individual carbon films was tested, with obtained RSD values of 3.7% and 3.6% for DCV and DPV, respectively. Under optimum conditions, the calibration dependences of 4-NP were measured in the concentration range from 1·10-6 to 1·10-4 mol/l, with the limits of quantification (LQs) of 1.5·10-6 mol/l (for DCV at the ls-CFE) and 4.6·10-7 mol/l (for DPV at the...
|
guest ::
