|
|
Proposal of a New Product Launching
Kovářová, Veronika ; Ing.Marianna Ďurašková (referee) ; Šimberová, Iveta (advisor)
The subject of this bachelor´s study called "Proposal introduction a new article market on home product" is an analysis of releasing a new product line "Unišek +". Le Cheque Déjeuner Group, s. r. o. is releasing this product to a Czech market. The first part compiles theoretical solutions for a market plan creation. That means specific methods used for creating a situational analysis and detailed analysis of fundamental parts of the market mix – called 4P ( product, price, place, promotion) - for the right selection of a marketing strategy when implementing a new product line. The second part is more practical and it characterises a company mentioned above, and also suggested working hypothesis.
|
|
|
Winery Lahofer Dobšice
Davčíková, Gabriela ; Myslín,, Jiří (referee) ; Dýr, Petr (advisor) ; Utíkalová, Ivana (advisor)
The objective of this Bachelor Thesis is the designof the Lahofer winery in Dobšice,a new building near Znojmo. The Bachelor Thesis expands and specifies an architectural study which I drafted as my AG33 subject during the summer semester of my second year (i.e.up to the level of Documentation for Planning Permission and Documentation for Execution of the Project). The tasked assignment is to design a winemaking house with amain production part, which allows for production from 750 thousand to 1 million bottlesper year, and to design an administrative part with premises for temporary workers. Other part includes a restaurant and public accommodations. A sloping terrain influences the whole design. So as not to give the impression of monumental dimensions the object is embedded into the ground as well. The exterior of the building appears as three interlocking blocks where in each block has its own purpose. The original idea was to construct the building parallel to the major axis, which is formed by the road. The production part meets this requirement. The administrative part is situated such that a partly roofed handling courtyard is created. From this courtyard, there is an entry point for employees and temporary workers as well as for the dispatching of goods and purchasing. The third part, where the restaurant and guest accommodations are situated, makes up the first floor. This block is situated such that a view of the surrounding vineyards is offered and simultaneously creates a terrace with entry to the restaurant. There is a fire escape going from the main production part as well. The façade is a combination of two contrasting materials,(i.e. structured concrete slabs and facade panels known as “Cor-ten”). Lastly, a staircase sheathing offers space for the company name and logo, “Vinařství Lahofer“, which can plainly be seen directly from the access road.
|
|
|
Risk Analysis of a Weldment Production Process
Slámová, Aneta ; Kurucová, Šárka (referee) ; Blecha, Petr (advisor)
This diploma thesis is focused on the risk analysis of a selected production process of the company SIK METAL s.r.o. The work is divided into three parts, the theoretical part, then the analysis of the current state and the design part. The theoretical part defines the basic concepts that relate to risks. These theoretical findings are then applied in the second part of the work, where risk identification is performed using various types of analysis. Based on selected analyzes, proposals and recommendations are proposed in the final part of the diploma thesis. Proposals and recommendations contain financial quantifications.
|
|
|
Technology of product machining on CNC machines
Brázda, Jiří ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
This diploma thesis deals with a technology of production milling of sample component “ending of generator shaft” by CNC milling in environment of small company. At first common aspects of CNC machines, technology of CNC milling and technology of construction are introduced. Possible problems with milling of sample component are analyzed and their possible solutions are presented. Next technology of CNC milling with operating program for CNC lathe (HAAS SL20) and CNC milling machine (HAAS VF3), production of component in small company with necessary documentation in technology procedure are projected. Using of operating systems HAAS, Fanuc and HEIDEHAIN are compared. Using of cutting tools and cutting condition for component milling is projected. Finally timing of operations and financial calculations necessary for small production of sample component is proposed.
|
|
|
Creation of Production Scheduling to Implement Customer Requirements
Holík, Radim ; Jaroš, Miroslav (referee) ; Jurová, Marie (advisor)
Discovering deficiencies in production tasks schedule of the TOS Kuřim – OS, a. s. company was the main impulse for creation of this master’s thesis. Analysis of provided data together with theoretical basis of relevant literature have created a basis for the suggestion. It’s the implementation of a newly designed process, which would reduce or fully eliminate deficiencies during its periodic execution. These suggestions also include a practical example of the process application.
|
|
|
Production of the "truss beam" component in a smaller engineering company
Šmerda, Michal ; Chladil, Josef (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis describes manufacturing of the "trussed beam" component in a small engineering company. This work is divided to several parts. The first part consists of theoretical points, which describes selected economic terms, terms about manufacturing and specific engineering technologies. Part two contains an analysis of the current state. In part three is created proposal solving, which including a product price calculation and proposal for streamlining production process and technological and economic evaluation.
|
|
|
Draft of pin production technology
Hrdlička, Martin ; Osička, Karel (referee) ; Jaroš, Aleš (advisor)
The Master's thesis, written during the study of M-STM Manufacturing Technology and Management in Industry, is focused on the concept of the production technology of a pin. The thesis includes a description of forming and machining technology in terms of possibilities of their application in the production of the pin. Furthermore, by comparing both technologies and preliminary economic evaluations of production, it leads to the choice of the production method. This production method is then described, and the description contains the production process steps including the creation of the CNC program. The conclusion of the thesis is devoted to the technical and economic evaluation of the production concept.
|
|
|
Rationalization of production technology body
Dostál, Martin ; Chladil, Josef (referee) ; Osička, Karel (advisor)
In the introductory part of the thesis, there is a description of machining technologies used in the production of body. This is followed by a detailed analyse of the current technology of production of this component with an emphasis on finding its problematic parts, including a proposal of the options of the rationalization. After the methods of rationalization assesment, a new technological process was developed and the alternative tools were proposed. Considerable time and money savings were achieved by this rationalization. In the discussion section, there were designed some options of solving problems arising during the installation of this rationalization into working.
|
|
|
Economic Aspects of Process Innovation in an Enterprise
Bilík, Adam ; Gregor, Ondřej (referee) ; Bočková, Nina (advisor)
The presented bachelor thesis deals with the assessment of selected economic aspects of the established process innovation in the field of production digitalization in the selected company. The economic benefits of innovation for the company were formulated on the basis of the economic indicators results evaluation. The analysis and evaluation of the implemented process innovation in a broader context clearly shows that the specific process innovation in the field of production digitalization has become a significant benefit for the company, as it has a positive impact on the company as well as on its employees and future direction. Digitization in general thus represents a clear trend that the analysed society intends to continue.
|
|
| |
guest ::
