|
|
Design of measurement unit for analysis of surface materials properties
Kratochvíl, Robert ; Rozsívalová, Zdenka (referee) ; Frk, Martin (advisor)
The thesis deals with the application of laser beams for examination of material properties. The properties being examined are quality of surface finish and transmissivity of materials in the optical portion of the electromagnetic spectrum. A measuring device containing laser diodes as a source of laser beam and photodiodes for evaluation of examined phenomena serves for examination of both properties. Conversion of the signal to digital quantity and its further processing take place in a microcontroller. The data is then sent via a serial bus and a converter to a computer, where it may be saved in a user program and where the user can work with them later. The thesis contains results of reflectivity measurement of a set of metal samples with different surface finish. Transmissivity measurement was applied on a set of optical filters.
|
|
|
The visibility identification on aerodromes in Czech Republic
Smetka, Adam ; Hudec, František (referee) ; Krška, Karel (advisor)
This work deals with the visibility and its breakdown by weather vocabulary. It discusses the development of RVR systems at airports in the Czech Republic, describes the measurement systems RVR MITRAS, MIDAS IV and history of selected airports. Other chapters describe the possible development of measurement techniques in RVR. The final section is devoted to the categories of runways.
|
|
|
Optimization of WiFi Distributed Nets
Žlůva, Ivan ; Krejzlíková, Libuše (referee) ; Matoušek, Radomil (advisor)
This thesis describes theoretic proposal and two practical realization of multi - point wireless network, first for communications between two endpoints and second for wireless signal coverage of a structured space. The wireless network is realized by the equipment working in unlicenced 2,4GHz and 5GHz ISM band. The wireless device are configured in three different wireless mods: WDS, WDS bridge and AP. This paper contains short information about IEEE 802.11a/b/g/n standard and associated proprietary wireless specifications. Practical workshop describes several variants connections and present the result of throughtput measurements, depending on wireless network topology.
|
|
|
Characterization of hard rock environment: archive borehole data and conceptual model
Vacková, Alena ; Bruthans, Jiří (advisor) ; Kůrková, Iva (referee)
This study is focused on characterization of the hardrock environment in surroundings of Sazava river. It is based on the archival data of groundwater table in boreholes, results of pumping tests from Geofond database and topographic data (DMR , watercourse, etc.). ArcMap 10.1 and Excel were used for data processing. The relations between the groundwater table depth, water table gradient, specific yield, transmissivity and variety of topographic parameters (distance from a watercourse, elevation, relative elevation above the nearest watercourse, the terrain gradient, etc.) were studied. Close linear relationship exists between the gradient of the terrain and groundwater table (rxy 0.96) in the study area. Groundwater table gradient is on average 88 % of terrain gradient. Mean groundwater table gradient is 10 % (6). The average transmissivity in the area is 1.27 x 10-4 m2 /s, specific yield is usually between 0.01 and 0.1 l/s m. This corresponds to the low and very low transmissivity class. Variability of transmisivity values is high. The difference between transmisivity in discharge and recharge zone, assumed by previous authors, was not confirmed in the study area. Specific base flow calculated from mean transmissivity, terrain/ water table gradient and river network density based on Krásný and...
|
|
|
Characterization of hard rock environment: archive borehole data and conceptual model
Vacková, Alena ; Bruthans, Jiří (advisor) ; Kůrková, Iva (referee)
This study is focused on characterization of the hardrock environment in surroundings of Sazava river. It is based on the archival data of groundwater table in boreholes, results of pumping tests from Geofond database and topographic data (DMR , watercourse, etc.). ArcMap 10.1 and Excel were used for data processing. The relations between the groundwater table depth, water table gradient, specific yield, transmissivity and variety of topographic parameters (distance from a watercourse, elevation, relative elevation above the nearest watercourse, the terrain gradient, etc.) were studied. Close linear relationship exists between the gradient of the terrain and groundwater table (rxy 0.96) in the study area. Groundwater table gradient is on average 88 % of terrain gradient. Mean groundwater table gradient is 10 % (6). The average transmissivity in the area is 1.27 x 10-4 m2 /s, specific yield is usually between 0.01 and 0.1 l/s m. This corresponds to the low and very low transmissivity class. Variability of transmisivity values is high. The difference between transmisivity in discharge and recharge zone, assumed by previous authors, was not confirmed in the study area. Specific base flow calculated from mean transmissivity, terrain/ water table gradient and river network density based on Krásný and...
|
|
|
Optimization of WiFi Distributed Nets
Žlůva, Ivan ; Krejzlíková, Libuše (referee) ; Matoušek, Radomil (advisor)
This thesis describes theoretic proposal and two practical realization of multi - point wireless network, first for communications between two endpoints and second for wireless signal coverage of a structured space. The wireless network is realized by the equipment working in unlicenced 2,4GHz and 5GHz ISM band. The wireless device are configured in three different wireless mods: WDS, WDS bridge and AP. This paper contains short information about IEEE 802.11a/b/g/n standard and associated proprietary wireless specifications. Practical workshop describes several variants connections and present the result of throughtput measurements, depending on wireless network topology.
|
|
|
Optimization of WiFi Distributed Nets
Žlůva, Ivan ; Krejzlíková, Libuše (referee) ; Matoušek, Radomil (advisor)
This thesis describes theoretic proposal and two practical realization of multi - point wireless network, first for communications between two endpoints and second for wireless signal coverage of a structured space. The wireless network is realized by the equipment working in unlicenced 2,4GHz and 5GHz ISM band. The wireless device are configured in three different wireless mods: WDS, WDS bridge and AP. This paper contains short information about IEEE 802.11a/b/g/n standard and associated proprietary wireless specifications. Practical workshop describes several variants connections and present the result of throughtput measurements, depending on wireless network topology.
|
|
|
Design of measurement unit for analysis of surface materials properties
Kratochvíl, Robert ; Rozsívalová, Zdenka (referee) ; Frk, Martin (advisor)
The thesis deals with the application of laser beams for examination of material properties. The properties being examined are quality of surface finish and transmissivity of materials in the optical portion of the electromagnetic spectrum. A measuring device containing laser diodes as a source of laser beam and photodiodes for evaluation of examined phenomena serves for examination of both properties. Conversion of the signal to digital quantity and its further processing take place in a microcontroller. The data is then sent via a serial bus and a converter to a computer, where it may be saved in a user program and where the user can work with them later. The thesis contains results of reflectivity measurement of a set of metal samples with different surface finish. Transmissivity measurement was applied on a set of optical filters.
|
|
|
The visibility identification on aerodromes in Czech Republic
Smetka, Adam ; Hudec, František (referee) ; Krška, Karel (advisor)
This work deals with the visibility and its breakdown by weather vocabulary. It discusses the development of RVR systems at airports in the Czech Republic, describes the measurement systems RVR MITRAS, MIDAS IV and history of selected airports. Other chapters describe the possible development of measurement techniques in RVR. The final section is devoted to the categories of runways.
|
guest ::
