|
|
Injection System Build-in on Tractor Engine
Svršek, Michal ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
The aim of this work is to design the installation of a new injection system to the existing tractor engines and construct new components necessary for proper function of the injection. In the following section is suggesting the location of other accessories for engine control. This is an injection system with a pressure reservoir "Common Rail" and all its components are created in modeling environment PTC Creo 2.0. Designed components are tested for strength and they are subjected to modal analysis.
|
|
|
Common Rail for Six-cylinder CI Engine
Božik, Michal ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
This thesis deals with the installation of high-pressure common rail injection system for six-cylinder tractor diesel engine. In the first part of the thesis is dismantled issue injection systems and related aspects. The next part is the installation of a fuel injection system, which involves placing components common rail system, the implementation of necessary interventions in engine design and the design of new components. The final section effect control calculations and stress analysis of new injection system components.
|
|
|
Common Rail for Six-cylinder CI Engine
Božik, Michal ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
This thesis deals with the installation of high-pressure common rail injection system for six-cylinder tractor diesel engine. In the first part of the thesis is dismantled issue injection systems and related aspects. The next part is the installation of a fuel injection system, which involves placing components common rail system, the implementation of necessary interventions in engine design and the design of new components. The final section effect control calculations and stress analysis of new injection system components.
|
|
|
The Possibilities of Displacement Increase of 4C Zetor Engine
Zloch, Jan ; Franz, Rudolf (referee) ; Dundálek, Radim (advisor)
Diploma thesis aims on mechanical design of new concept of Zetor UŘ III engine with displacement increase and solves calculations of main and pin hydrodynamic bearings of crankshaft. Creo 2 CAD software is used for preparing mechanical design of this new concept. For computation and analysis of hydrodynamic bearings multibody model of crankshaft mechanism is used with flexible FEM model of crankshaft for solving dynamics of mechanism and performing hydrodynamic analysis of bearings in FEV Virtual Engine. Results of this diploma thesis demonstrate the feasibility of new concept of engine and serve as a basis for next engineering tasks before realization of concept.
|
|
|
Common Rail for Four-cylinder CI Engine
Brhel, Štěpán ; Svída, David (referee) ; Dundálek, Radim (advisor)
This master´s thesis deals with instalation of high pressure injection system Common Rail on four-cylinder tractor CI engine. Thesis introduces in the first part the injection systems of CI and tractor engines and related issues. In the next part is solved the conversion of engine, design of most important components - injetor, high pressure pump, pressure accumulator and high-pressure pipes and then stress analysis of new components.
|
|
|
Possibilities of 2-cylinder Engine Balancing for Tractor Usage
Vaško, Roman ; Franz, Rudolf (referee) ; Dundálek, Radim (advisor)
This thesis deals with possibilities of 2-cylinder engine balancing for tractor usage. The purpose of this thesis is to find a technical solution for the creation of the concept of balancing using balancing shaft. Check the proposed solution by FEM analysis and evaluate the fatigue safety. The content of the thesis is the creation of computational and graphical documentation too.
|
|
|
Common Rail for Six-cylinder CI Engine
Božik, Michal ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
This thesis deals with the installation of high-pressure common rail injection system for six-cylinder tractor diesel engine. In the first part of the thesis is dismantled issue injection systems and related aspects. The next part is the installation of a fuel injection system, which involves placing components common rail system, the implementation of necessary interventions in engine design and the design of new components. The final section effect control calculations and stress analysis of new injection system components.
|
|
|
The Possibilities of Displacement Increase of 4C Zetor Engine
Zloch, Jan ; Franz, Rudolf (referee) ; Dundálek, Radim (advisor)
Diploma thesis aims on mechanical design of new concept of Zetor UŘ III engine with displacement increase and solves calculations of main and pin hydrodynamic bearings of crankshaft. Creo 2 CAD software is used for preparing mechanical design of this new concept. For computation and analysis of hydrodynamic bearings multibody model of crankshaft mechanism is used with flexible FEM model of crankshaft for solving dynamics of mechanism and performing hydrodynamic analysis of bearings in FEV Virtual Engine. Results of this diploma thesis demonstrate the feasibility of new concept of engine and serve as a basis for next engineering tasks before realization of concept.
|
|
|
Possibilities of 2-cylinder Engine Balancing for Tractor Usage
Vaško, Roman ; Franz, Rudolf (referee) ; Dundálek, Radim (advisor)
This thesis deals with possibilities of 2-cylinder engine balancing for tractor usage. The purpose of this thesis is to find a technical solution for the creation of the concept of balancing using balancing shaft. Check the proposed solution by FEM analysis and evaluate the fatigue safety. The content of the thesis is the creation of computational and graphical documentation too.
|
|
|
Injection System Build-in on Tractor Engine
Svršek, Michal ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
The aim of this work is to design the installation of a new injection system to the existing tractor engines and construct new components necessary for proper function of the injection. In the following section is suggesting the location of other accessories for engine control. This is an injection system with a pressure reservoir "Common Rail" and all its components are created in modeling environment PTC Creo 2.0. Designed components are tested for strength and they are subjected to modal analysis.
|
guest ::
