|
|
Optimization of tool cutting geometry for high-speed machining of thin-walled parts
Barcuch, Jakub ; Humár, Anton (referee) ; Píška, Miroslav (advisor)
The theoretical part of the thesis deals with materials used in the aircraft industry with a focus on aluminium alloys. Then it describes high speed machining, its characteristics and its comparison with conventional machining. The following chapters describe strategies of machining thin-walled parts and a description of vibration that occurs during machining. The practical part deals with selection appropriate tool geometry, machining of thin-walled parts and evaluation of their deflection during machining.
|
|
|
The comparison of cutting tools for milling of dental impression made from materials Ti6Al4V ELI and CoCr
Bíba, David ; Zemčík, Oskar (referee) ; Dvořák, Jaromír (advisor)
The aim of this dissertation is the comparison of two chosen milling tools. Both milling tools are made of solide carbides and therefore the theoretical part deals with these materials. We compare the chemical composition as well as the milling tools materials. Next chapter deals with the geometry of the milling tools with semi-circular front blades cutting edges and comparison. In the last part of the dissertation we test the durability. The data gained by a micrometric method are interpreted in the graph. By means of this research we found out the impact on the suitably chosen geometry on splinters and wear resistance. It is possible to optimize the produced milling tools or to choose more suitable tool instrument on the basis of gained durability data.
|
|
|
Optimization of Machining Parameters Abradable Sprayed used in the Aerospace Industry
Krajkovič, Pavel ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
This thesis is focused on machining of thermal spray coatings. Particularly on testing of machining parameters and their influence on different types of abradable coatings used in the aerospace industry. The aim of research work is to test the parameters, measure cutting forces by using a dynamometer and their impact on the quality of the machined surface. Determination of the optimal machining parameters for different types of coatings based on results of measurements and the evaluation of surface quality. There are also presented techniques of thermal spray application and methods of coating evaluation. Further it describes a method of measuring cutting forces by using the dynamometer and methods of surface quality evaluation.
|
|
|
The comparison of cutting tools for milling of dental impression made from materials Ti6Al4V ELI and CoCr
Bíba, David ; Zemčík, Oskar (referee) ; Dvořák, Jaromír (advisor)
The aim of this dissertation is the comparison of two chosen milling tools. Both milling tools are made of solide carbides and therefore the theoretical part deals with these materials. We compare the chemical composition as well as the milling tools materials. Next chapter deals with the geometry of the milling tools with semi-circular front blades cutting edges and comparison. In the last part of the dissertation we test the durability. The data gained by a micrometric method are interpreted in the graph. By means of this research we found out the impact on the suitably chosen geometry on splinters and wear resistance. It is possible to optimize the produced milling tools or to choose more suitable tool instrument on the basis of gained durability data.
|
|
|
Optimization of Machining Parameters Abradable Sprayed used in the Aerospace Industry
Krajkovič, Pavel ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
This thesis is focused on machining of thermal spray coatings. Particularly on testing of machining parameters and their influence on different types of abradable coatings used in the aerospace industry. The aim of research work is to test the parameters, measure cutting forces by using a dynamometer and their impact on the quality of the machined surface. Determination of the optimal machining parameters for different types of coatings based on results of measurements and the evaluation of surface quality. There are also presented techniques of thermal spray application and methods of coating evaluation. Further it describes a method of measuring cutting forces by using the dynamometer and methods of surface quality evaluation.
|
|
|
Optimization of tool cutting geometry for high-speed machining of thin-walled parts
Barcuch, Jakub ; Humár, Anton (referee) ; Píška, Miroslav (advisor)
The theoretical part of the thesis deals with materials used in the aircraft industry with a focus on aluminium alloys. Then it describes high speed machining, its characteristics and its comparison with conventional machining. The following chapters describe strategies of machining thin-walled parts and a description of vibration that occurs during machining. The practical part deals with selection appropriate tool geometry, machining of thin-walled parts and evaluation of their deflection during machining.
|
guest ::
