|
|
Family House with atelier
Miheličová, Gabriela ; Novotný, Miloslav (referee) ; Čupr, Karel (advisor)
The aim of this bachelor thesis is to design and draft project documentation for the building works of a family house with an atelier in the cadastral area of Oleško. It is a three-storey detached house with its interior layout corresponding to the conditions of service. The family house is designed for a four-member family. The structure of the building is made of the system of POROTHERM with an outer insulation system of BAUMIT OPENTHERM with the thickness of 120 mm. Peripheral vertical supporting structures of the ground floor and the first floor will be lined with POROTHERM 30 P+D and the basement will be made from a permanent formwork of Prefa Brno BTB 40/30/24 (P+D). The interior bearing masonry walls are made of POROTHERM 24 P+D and non-bearing walls are made of POROTHERM 11.5 AKU. The exterior plastering in white colour is the water-resistant, thin-film grooved plaster of BAUMIT OPENTOP with the grains of 2 mm. The staircase is monolithic, of reinforced concrete. Horizontal bearing structures are made of ceramic-concrete system of POROTHERM with the thickness of 250 mm (Pot girders and Miako fillers). The roof is double-pitched with the roof tiling in black colour of TONDACH Jiřčanka 13. The wood doors and windows are designed in the colour of walnut; the garage has a section door also in the walnut colour. The flooring has been chosen according to the type of usage of each of the rooms, i.e. ceramic flooring, wooden floor, The main aim of my work was to design a layout for the particular purpose, i.e. a suitable solution of the structure and a draft of technical documentation with drawings, text part included. The bachelor work is processed in the form of project documentation for the realization of the building.
|
|
|
Villa - Type House
Štrop, Jaroslav ; Tschiedel, Pavel (referee) ; Donaťáková, Dagmar (advisor)
The subject of Bachelor’s thesis is devise project documentation for villa-type house. The building is designed as a non-basement, two floors with attic, located on a flat ground in quiet environment. Part of the house is garage parking for two cars. House is designed of brick blocks, roofed hipped roof including dormer, further flast roofs used as terraces. Disposition enable comfortable accommodation for 8-10 people.
|
|
|
Detached house with hairdressing saloon
Tišlová, Jana ; Pailová, Alena (referee) ; Maceková, Věra (advisor)
The aim of this bachelor thesis is to design and draft project documentation for the building works of a family house with an in-house hairdresser´s salon in the cadastral area of Řečany nad Labem. It is a three-storey detached house with its interior layout corresponding to the conditions of service. The family house is designed for a four-member family. In the lower basement there is a storeroom, a utility room, and a workout room. On the ground floor there is a kitchen and a living room, moreover, there is the hairdresser´s salon designed for the owner of the house. The first floor is designed as the area for living. The structure of the building is made of the system of POROTHERM with an outer insulation system of BAUMIT OPEN with the thickness of 120 mm. Peripheral vertical supporting structures of the ground floor and the first floor will be lined with POROTHERM 30 P+D and the basement will be made from a permanent formwork of DEK 30. The interior bearing masonry walls are made of POROTHERM 30 P+D and non-bearing walls are made of POROTHERM 11.5 AKU. The exterior plastering in light grey colour is the water-resistant, thin-film grooved plaster of BAUMIT OPENTOP with the grains of 2 mm. The staircase is monolithic, of reinforced concrete. Horizontal bearing structures are made of ceramic-concrete system of POROTHERM with the thickness of 250 mm (Pot girders and Miako fillers). The roof is double-pitched with the roof tiling in black colour of TONDACH Samba 11. The plastic doors and windows are designed in the colour of grey; the garage has a section door also in the grey colour. The flooring has been chosen according to the type of usage of each of the rooms, i.e. ceramic flooring, laminate floor, and rubber floor tiles. The main aim of my work was to design a layout for the particular purpose, i.e. a suitable solution of the structure and a draft of technical documentation with drawings, text part included. The bachelor work is processed in the form of proj
|
|
|
Family house with an establishment
Bartoňková, Monika ; Král, Jakub (referee) ; Čupr, Karel (advisor)
The aim of my bachelor thesis is to design and elaborate project documentation for the construction of a building with a design office in the cadastral area of Mikulovice near Pardubice. It is a two-storey, partly basement detached house, which with its layout corresponds to the conditions of the building operation. The family house is designed for a four-member family. On the first underground floor there is a toilet + bathroom with a technical room and a gym. On the ground floor there is a project office that is designed for the owner of the house, a kitchen, a living room, a guest room with its own dressing room, a workshop connected with a garage. On the second floor there is a residential part, consisting of 3 rooms and a studio. The construction system of the building is designed from the POROTHERM system with an ISOVER GREYWALL external contact insulation system with a thickness of 120 mm. The vertical supporting perimeter structures of the 1st floor, the 1st NP and the 2nd NP will be wired from the POROTHERM 30 P + D. The internal bearing walls are made of POROTHERM 30 P + D and the POROTHERM 19 AKU and POROTHERM 11,5 PROFI are used for non-load-bearing masonry. The external plaster is a water-repellent CEMIX FLEXI thin-film plaster grooved with a grain size of 2 mm in light gray. The staircase is monolithic, of reinforced concrete. Horizontal bearing structures are made of ceramic-concrete system of POROTHERM with the thickness of 250 mm (Pot girders and Miako fillers). The roof is double-pitched with the roof tiling in black colour of TONDACH Hranice 11. The plastic doors and windows are designed in the colour of grey ane white; the garage has a section door also in the grey colour. The flooring has been chosen according to the type of usage of each of the rooms, i.e. ceramic flooring and laminate floor. The main aim of my work was to design a layout for the particular purpose, i.e. a suitable solution of the structure and a draft of technical documentatio
|
|
|
Family house with an establishment
Bartoňková, Monika ; Král, Jakub (referee) ; Čupr, Karel (advisor)
The aim of my bachelor thesis is to design and elaborate project documentation for the construction of a building with a design office in the cadastral area of Mikulovice near Pardubice. It is a two-storey, partly basement detached house, which with its layout corresponds to the conditions of the building operation. The family house is designed for a four-member family. On the first underground floor there is a toilet + bathroom with a technical room and a gym. On the ground floor there is a project office that is designed for the owner of the house, a kitchen, a living room, a guest room with its own dressing room, a workshop connected with a garage. On the second floor there is a residential part, consisting of 3 rooms and a studio. The construction system of the building is designed from the POROTHERM system with an ISOVER GREYWALL external contact insulation system with a thickness of 120 mm. The vertical supporting perimeter structures of the 1st floor, the 1st NP and the 2nd NP will be wired from the POROTHERM 30 P + D. The internal bearing walls are made of POROTHERM 30 P + D and the POROTHERM 19 AKU and POROTHERM 11,5 PROFI are used for non-load-bearing masonry. The external plaster is a water-repellent CEMIX FLEXI thin-film plaster grooved with a grain size of 2 mm in light gray. The staircase is monolithic, of reinforced concrete. Horizontal bearing structures are made of ceramic-concrete system of POROTHERM with the thickness of 250 mm (Pot girders and Miako fillers). The roof is double-pitched with the roof tiling in black colour of TONDACH Hranice 11. The plastic doors and windows are designed in the colour of grey ane white; the garage has a section door also in the grey colour. The flooring has been chosen according to the type of usage of each of the rooms, i.e. ceramic flooring and laminate floor. The main aim of my work was to design a layout for the particular purpose, i.e. a suitable solution of the structure and a draft of technical documentatio
|
|
|
Detached house with hairdressing saloon
Tišlová, Jana ; Pailová, Alena (referee) ; Maceková, Věra (advisor)
The aim of this bachelor thesis is to design and draft project documentation for the building works of a family house with an in-house hairdresser´s salon in the cadastral area of Řečany nad Labem. It is a three-storey detached house with its interior layout corresponding to the conditions of service. The family house is designed for a four-member family. In the lower basement there is a storeroom, a utility room, and a workout room. On the ground floor there is a kitchen and a living room, moreover, there is the hairdresser´s salon designed for the owner of the house. The first floor is designed as the area for living. The structure of the building is made of the system of POROTHERM with an outer insulation system of BAUMIT OPEN with the thickness of 120 mm. Peripheral vertical supporting structures of the ground floor and the first floor will be lined with POROTHERM 30 P+D and the basement will be made from a permanent formwork of DEK 30. The interior bearing masonry walls are made of POROTHERM 30 P+D and non-bearing walls are made of POROTHERM 11.5 AKU. The exterior plastering in light grey colour is the water-resistant, thin-film grooved plaster of BAUMIT OPENTOP with the grains of 2 mm. The staircase is monolithic, of reinforced concrete. Horizontal bearing structures are made of ceramic-concrete system of POROTHERM with the thickness of 250 mm (Pot girders and Miako fillers). The roof is double-pitched with the roof tiling in black colour of TONDACH Samba 11. The plastic doors and windows are designed in the colour of grey; the garage has a section door also in the grey colour. The flooring has been chosen according to the type of usage of each of the rooms, i.e. ceramic flooring, laminate floor, and rubber floor tiles. The main aim of my work was to design a layout for the particular purpose, i.e. a suitable solution of the structure and a draft of technical documentation with drawings, text part included. The bachelor work is processed in the form of proj
|
|
|
Family House with atelier
Miheličová, Gabriela ; Novotný, Miloslav (referee) ; Čupr, Karel (advisor)
The aim of this bachelor thesis is to design and draft project documentation for the building works of a family house with an atelier in the cadastral area of Oleško. It is a three-storey detached house with its interior layout corresponding to the conditions of service. The family house is designed for a four-member family. The structure of the building is made of the system of POROTHERM with an outer insulation system of BAUMIT OPENTHERM with the thickness of 120 mm. Peripheral vertical supporting structures of the ground floor and the first floor will be lined with POROTHERM 30 P+D and the basement will be made from a permanent formwork of Prefa Brno BTB 40/30/24 (P+D). The interior bearing masonry walls are made of POROTHERM 24 P+D and non-bearing walls are made of POROTHERM 11.5 AKU. The exterior plastering in white colour is the water-resistant, thin-film grooved plaster of BAUMIT OPENTOP with the grains of 2 mm. The staircase is monolithic, of reinforced concrete. Horizontal bearing structures are made of ceramic-concrete system of POROTHERM with the thickness of 250 mm (Pot girders and Miako fillers). The roof is double-pitched with the roof tiling in black colour of TONDACH Jiřčanka 13. The wood doors and windows are designed in the colour of walnut; the garage has a section door also in the walnut colour. The flooring has been chosen according to the type of usage of each of the rooms, i.e. ceramic flooring, wooden floor, The main aim of my work was to design a layout for the particular purpose, i.e. a suitable solution of the structure and a draft of technical documentation with drawings, text part included. The bachelor work is processed in the form of project documentation for the realization of the building.
|
|
|
Villa - Type House
Štrop, Jaroslav ; Tschiedel, Pavel (referee) ; Donaťáková, Dagmar (advisor)
The subject of Bachelor’s thesis is devise project documentation for villa-type house. The building is designed as a non-basement, two floors with attic, located on a flat ground in quiet environment. Part of the house is garage parking for two cars. House is designed of brick blocks, roofed hipped roof including dormer, further flast roofs used as terraces. Disposition enable comfortable accommodation for 8-10 people.
|
guest ::
