|
|
Numerical Modelling of the Light Source
Pavelka, Adam ; Koňas,, Petr (referee) ; Kadlec, Radim (advisor)
The master’s thesis deals with photometry units used in light engineering. There are defined the methods of modelling the illumination systems, their advantages, disadvantages and possibilities of using. Furthermore, the thesis deals with modelling of two illumination systems by ray-tracing in programming environment of MATLAB. The master’s thesis describes the analysis of the problem and the program designing process. Acquired model results are then compared with the real measurements of both illumination systems which allow the discussion of the results and the deviations of the models.
|
|
|
Luminance scanning of luminaires and light sources
Ševčík, Ondřej ; Baxant, Petr (referee) ; Škoda, Jan (advisor)
Práce se zabývá měřením křivek svítivosti světelných zdrojů a svítidel konvenčními a nekonvenčními metodami. Úvodní část práce je věnována popisu zrakového systému a základních fotometrických veličin. Hlavní teoretická část je zaměřena na popis současných metod měření křivek svítivosti a nových metod měření pomocí jasového analyzátoru. Současně jsou pro jednotlivé metody uvedeny zdroje nejistot, které ovlivňují výsledky měření. Těžiště práce spočívá v návrhu metodiky měření křivek svítivosti z jasových skenů svítidla a následném ověření tohoto postupu vlastním měřením. Dále bylo provedeno srovnání naměřených výsledků navrženým postupem, s výsledky konvenčního měření na goniofotometru s luxmetrem.
|
|
|
Near-field photometry
Kutý, Tomáš ; Baxant, Petr (referee) ; Škoda, Jan (advisor)
This thesis is focused on the theoretical and practical introduction to the verification procedures used today for obtaining luminosity curves of lamps. The introduction acquaints readers with the photometric variables. Consequently, it is theoretically described procedure for constructing luminance curves by zonal flow and further familiarization with the near-field photometry. For the practical part was chosen several lights. These lamps were measured by luxmeter first from a very close photometric distance from lights, and then from large distance. The next step was to obtain pictures of luminaries in planes C 0 to 345 ° (with a step of 15 °) of the angle gamma from 0 to 180 ° (in steps of 5 °). The measured data were processed by zonal flow and through programs LumiDISP and Matlab. The partial result of this thesis is to verify whether it is possible to use the luminance analyzer for obtaining luminosity curves, it means, if the luminosity curve obtained through luminance analyzer will comply with the curves obtained through a luxmeter. Further work should ascertain the feasibility of acquired photographs lamps from a very close photometric distance could create luminosity curve for any location and distance from the observer to measured lamps.
|
|
|
Measurement of Operational Parameters of Light Sources
Motyčka, Martin ; Pavelka, Tomáš (referee) ; Krbal, Michal (advisor)
This semestral thesis is focused on description of operating parameters of light sources and their measurements. There are descripted light-technical, electrical and other parameters of light sources and methods of their measurements and evaluations. In tables there are ranges of fotometric quantities for most types of light sources. This thesis is also focused on functional explanation of photometric measuring instruments.
|
|
|
Luminaire position influence on measured parameters in integrating sphere.
Vlček, Pavel ; Škoda, Jan (referee) ; Motyčka, Martin (advisor)
This bachelor thesis deals with the influence of the position of luminaires with narrow radiation characteristics when measured in the integrating sphere. The basic light technical parameters are summarized here. Especially, luminous flux, illuminance, solid angle, luminous intesity and luminance, followed by colour temperature and general colour rendering index. This thesis also deals with the measuring instruments, at first with the basic element, which is the photoelement and then with the following instruments: the illuminance meter, the luminance meter, the spectroradiometer, the goniophotometer and the integrating sphere. The thesis is summarization of the basic information about luminaires. This theory is followed by a laboratory measurement that deals with the measurement of luminaires on a goniophotometer and in the integrating sphere. Goniophotometer measurements are important in conditions of acquire accurate luminous flux. The luminous flux from the goniophotometer is compared with the single measured values in the set positions when measured in the integrating sphere. As a result, the position of the luminaire in the integrating sphere is influenced
|
|
|
Reverse calculation of the luminous intensity curves of street lighting luminaires
Knápková, Dagmar ; Baxant, Petr (referee) ; Škoda, Jan (advisor)
This master´s thesis deals with the reverse calculation of luminous curves for roads according to ČSN EN 13201. The thesis is divided into the theoretical and the practical part. The theoretical part describes the basic requirements and procedures for calculating the luminous curves. The practical part describes the program, created in the Matlab environment, which is designed for the practical calculation of the ideal luminous curve, for each situation given by the user. Further particular example of the calculation is given.
|
|
|
Design svítidla
Vacková, Romana
The content of this thesis is the design of table lamp made of wood material using LED technology in this light. The theoretical part contain basic information on lighting history and subsequently function of LED strips, their strengths, power options, colouring and the method of installation. It was necessary to survey contemporary table lights on the market before own design. In the area own design it is described the procedure in the design which is accompanied by pictures of sketches, 3D models and test models. The final design is presented in 3D visualization.
|
|
|
Luminaire position influence on measured parameters in integrating sphere.
Vlček, Pavel ; Škoda, Jan (referee) ; Motyčka, Martin (advisor)
This bachelor thesis deals with the influence of the position of luminaires with narrow radiation characteristics when measured in the integrating sphere. The basic light technical parameters are summarized here. Especially, luminous flux, illuminance, solid angle, luminous intesity and luminance, followed by colour temperature and general colour rendering index. This thesis also deals with the measuring instruments, at first with the basic element, which is the photoelement and then with the following instruments: the illuminance meter, the luminance meter, the spectroradiometer, the goniophotometer and the integrating sphere. The thesis is summarization of the basic information about luminaires. This theory is followed by a laboratory measurement that deals with the measurement of luminaires on a goniophotometer and in the integrating sphere. Goniophotometer measurements are important in conditions of acquire accurate luminous flux. The luminous flux from the goniophotometer is compared with the single measured values in the set positions when measured in the integrating sphere. As a result, the position of the luminaire in the integrating sphere is influenced
|
|
|
Reverse calculation of the luminous intensity curves of street lighting luminaires
Knápková, Dagmar ; Baxant, Petr (referee) ; Škoda, Jan (advisor)
This master´s thesis deals with the reverse calculation of luminous curves for roads according to ČSN EN 13201. The thesis is divided into the theoretical and the practical part. The theoretical part describes the basic requirements and procedures for calculating the luminous curves. The practical part describes the program, created in the Matlab environment, which is designed for the practical calculation of the ideal luminous curve, for each situation given by the user. Further particular example of the calculation is given.
|
|
|
Light sources and their efficiency
BAČÁKOVÁ, Martina
This bachelor thesis deals with light sources and their efficiency. The first part of the thesis discusses the development of bulbs and represents the major milestones of lighting, including public lighting. It also deals with the principle and the use of light sources and their classification by species, type, manufacturer and price as well. The analytic part consists of the comparative analysis of different types of light sources according to their luminous efficacy and their cost. As part of this, the analysis and radiation patterns of all tested bulbs is provided. The analysis of the luminosity of one bulb for lighting several hundred hours is the last part of this section. The thesis results are summarized and commented in the conclusion.
|
guest ::
