|
|
The production of a component of a lever lock
Hráček, Josef ; Řiháček, Jan (referee) ; Peterková, Eva (advisor)
The master‘s thesis deals with the suggestion of the production of a component of a lever closure, which is used as a quick-clamping mechanism. The part is made of low-carbon steel DC01 in the form of a sheet with a thickness of 1.5 mm and an annual production of 200,000 pcs. The individual production methods were chosen using a progressive combined tool that combines cutting and bending. After evaluating the technology, determining the developed shape of the part and choosing its location on the line was chosen a semi-finished product in the form of metal coils sheet. After determining the production procedure, which consists of four steps, technological, construction and control calculations were carried out on the basis of which the tool was constructed. An eccentric press LEN 63 C was chosen as a suitable machine for production. A feed line marked ARPL RAL 150 was also chosen for production.
|
|
|
Manufacturing of a Cable Holder
Šimka, Radek ; Žák, Ladislav (referee) ; Řiháček, Jan (advisor)
The bachelor’s thesis proposes a design for the production technology of the cabling holder, situated in the outdoor part of the air conditioner. This product is made of steel sheet DC01 with a thickness of 1 mm. The production of this holder is set to be 200 000 pieces per year. A progressive die tool was selected as the most suitable type of production technology, based on a literature study of various production technologies. This enables to combine cutting and bending of steel sheets with the use of one tool device. Manufacture will be performed using a mechanical eccentric press LEN 63 C. All the necessary requirements of this device are satisfactory for the production.
|
|
|
Optimisation of the punching process on the TruPunch 1000 machine
Kudláč, Lukáš ; Dvořák, Milan (referee) ; Peterková, Eva (advisor)
Content of this bachelor thesis is the suggestion of optimisation of punching process on the TruPunch 1000 in Limid Mohelno s.r.o. Case of device for induction heating is manufactured from steel DC01 with thickness 1 mm. To manufacturing of the evolved shape was as the most advantageous technology determined the punching technology. Principle and fundamentals of punching are described in the theoretical part of this thesis. In the practical part is suggested optimisation including technical and economical evaluation and comparison of the prices for original and new suggested process.
|
|
|
Manufacturing of a Cable Holder
Šimka, Radek ; Žák, Ladislav (referee) ; Řiháček, Jan (advisor)
The bachelor’s thesis proposes a design for the production technology of the cabling holder, situated in the outdoor part of the air conditioner. This product is made of steel sheet DC01 with a thickness of 1 mm. The production of this holder is set to be 200 000 pieces per year. A progressive die tool was selected as the most suitable type of production technology, based on a literature study of various production technologies. This enables to combine cutting and bending of steel sheets with the use of one tool device. Manufacture will be performed using a mechanical eccentric press LEN 63 C. All the necessary requirements of this device are satisfactory for the production.
|
|
|
Optimisation of the punching process on the TruPunch 1000 machine
Kudláč, Lukáš ; Dvořák, Milan (referee) ; Peterková, Eva (advisor)
Content of this bachelor thesis is the suggestion of optimisation of punching process on the TruPunch 1000 in Limid Mohelno s.r.o. Case of device for induction heating is manufactured from steel DC01 with thickness 1 mm. To manufacturing of the evolved shape was as the most advantageous technology determined the punching technology. Principle and fundamentals of punching are described in the theoretical part of this thesis. In the practical part is suggested optimisation including technical and economical evaluation and comparison of the prices for original and new suggested process.
|
guest ::
