|
|
Dynamic analysis of structure with seismic loads
Šnajdárková, Jana ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
This thesis focuses on creation of two models of high-rise construction - beam and shell. A dynamic analysis is performed on these models. The selected program is RFEM software and the created high-rise construction is Hearst Tower skyscraper, which is interesting for its diagrid system around its perimeter. There is described process of creating both models and associated problems. Dynamic analysis is performed using standard EN 1998-1. There belongs calculations of sufficient number of modal shapes, spectral analysis and time analysis. Then the results are compared on selected point on the both models.
|
|
|
Seismic analysis of structure with residual modes
Včelný, Michal ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
This thesis deals with the possibility of using the residual shape with help of the structural analysis software SCIA Engineer in the calculation of seismic load. Residual shape will be used in combination with CQC and SRSS calculation method, including different numbers of own shapes and the oscillated mass. In the last step, the results will be compared with each other.
|
|
|
Analysis of the structure for the effects of earthquakes
Švejcar, Martin ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
This master thesis deals with analysis of a selected construction subjected to a seismic load. In the Dlubal RFEM programme, a basic model was created and analyzed with the spectral analysis using response spectra and with the time analysis using accelerograms from the database of the programme. The outcomes from these analyses were compared. Subsequently, the same calculations were performed on modified models and the results of the internal forces and deformations of the structure were compared with the outputs obtained on the original basic model.
|
|
|
Seismic Design of Structural Steel Connections
Sotulář, Jiří ; Šabatka,, Lubomír (referee) ; Pilgr, Milan (referee) ; Hron, Lukáš (advisor)
The thesis deals with the analysis and standard check of structural steel connections subjected to seismic loads. Analysis is based on a software solution and standard check is performed according to standard requirements and formulas. The first part deals with the theory of seismic load. There are described the general knowledges about the earthquake and the method of determining the effects of seismic loading on buildings according to the EN 1998-1. In the second part of the thesis is made design and check seismically loaded multi-storey steel building. Design is based on recommendations of the EN 1998-1 and some recommendations of research. In the third part is the analysis, verification and check of steel joints, which are contained in the structure designed in the second part of the thesis. On the basis results of analyses of indivudual connections are defined recommendations and requirements for the use and design structural steel connections subjected to seismic loads.
|
|
|
The Analysis of Slope Stability in Difficult Geotechnical Conditions
Wetterová, Alice ; Lacina, Jaroslav (referee) ; Glisníková, Věra (advisor)
Aim of the diploma thesis is design elements of slope stabilization in accordance with the planned highway D3 in Slovakia section of Cadca, Bukov - Svrčinovec and relocation of a local road. Objective subject is situated on the slopes of Cadca. In diploma thesis is an analysis of the area with the proposed stabilizing elements in the 5 GEO FEM, their assessment, including determining the overall stability of the territory according to the degree of safety.
|
|
|
Dynamic models of earthquake source and modeling of seismicity
Kostka, Filip ; Gallovič, František (advisor) ; Matyska, Ctirad (referee)
In the present thesis we perform modeling of earthquake source using laboratory derive rate-and-state laws of friction. We have developed a code in Fortran 90 for modeling a planar, two-dimensional fault with general dip and heterogeneous distribution of frictional parameters. We use a quasi-dynamic approximation and assume that the fault is submnerged in an infinite elastic half-space. We performed an extensive number of numerical experiments to study the effect of fricitonal parameters distribution on the spatio-temporal complexity of slip on fault. We also study the effect of the so called Coulomb stress changed on clock advance and clock delay of events. For this purpose we use both a homogeneous model and a model of random frictional parameteres which exhibits the Gutenberg-Richter frequency- size dependence in the range of two magnitudes. We find that the effect of Couloumb stress change is nontrivial and depends on factors such as the domain of stress load and the slip velocity on it. Powered by TCPDF (www.tcpdf.org)
|
|
|
Seismic analysis of structure with residual modes
Včelný, Michal ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
This thesis deals with the possibility of using the residual shape with help of the structural analysis software SCIA Engineer in the calculation of seismic load. Residual shape will be used in combination with CQC and SRSS calculation method, including different numbers of own shapes and the oscillated mass. In the last step, the results will be compared with each other.
|
|
|
Dynamic models of earthquake source and modeling of seismicity
Kostka, Filip ; Gallovič, František (advisor) ; Matyska, Ctirad (referee)
In the present thesis we perform modeling of earthquake source using laboratory derive rate-and-state laws of friction. We have developed a code in Fortran 90 for modeling a planar, two-dimensional fault with general dip and heterogeneous distribution of frictional parameters. We use a quasi-dynamic approximation and assume that the fault is submnerged in an infinite elastic half-space. We performed an extensive number of numerical experiments to study the effect of fricitonal parameters distribution on the spatio-temporal complexity of slip on fault. We also study the effect of the so called Coulomb stress changed on clock advance and clock delay of events. For this purpose we use both a homogeneous model and a model of random frictional parameteres which exhibits the Gutenberg-Richter frequency- size dependence in the range of two magnitudes. We find that the effect of Couloumb stress change is nontrivial and depends on factors such as the domain of stress load and the slip velocity on it. Powered by TCPDF (www.tcpdf.org)
|
|
|
Seismic Design of Structural Steel Connections
Sotulář, Jiří ; Šabatka,, Lubomír (referee) ; Pilgr, Milan (referee) ; Hron, Lukáš (advisor)
The thesis deals with the analysis and standard check of structural steel connections subjected to seismic loads. Analysis is based on a software solution and standard check is performed according to standard requirements and formulas. The first part deals with the theory of seismic load. There are described the general knowledges about the earthquake and the method of determining the effects of seismic loading on buildings according to the EN 1998-1. In the second part of the thesis is made design and check seismically loaded multi-storey steel building. Design is based on recommendations of the EN 1998-1 and some recommendations of research. In the third part is the analysis, verification and check of steel joints, which are contained in the structure designed in the second part of the thesis. On the basis results of analyses of indivudual connections are defined recommendations and requirements for the use and design structural steel connections subjected to seismic loads.
|
|
|
Dynamic analysis of structure with seismic loads
Šnajdárková, Jana ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
This thesis focuses on creation of two models of high-rise construction - beam and shell. A dynamic analysis is performed on these models. The selected program is RFEM software and the created high-rise construction is Hearst Tower skyscraper, which is interesting for its diagrid system around its perimeter. There is described process of creating both models and associated problems. Dynamic analysis is performed using standard EN 1998-1. There belongs calculations of sufficient number of modal shapes, spectral analysis and time analysis. Then the results are compared on selected point on the both models.
|
guest ::
