|
|
Family house
Fendrich, Lukáš ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
The content of this thesis is the construction of a detached house in the Moravany village near the city of Brno. This is a house with two floors and a basement. The house is a self-contained housing unit, and is designed for 2 persons (2 children, 2 adults) for long-term accommodation. The main load-bearing walls are made of structural system Ytong and Prefa for underground walls. The non-supported walls in the basement are made of autoclaved aerated concrete, the rest of non-supported walls are made of plasterboard in the floors. The ceilings are made up of Ytong beams and autoclaved aerated concrete inserts, cast-concrete layer, forming reinforced concrete beamed ceiling. The roof is sloped, gabled, created by the construction of timber truss, purlin system.
|
|
|
The villahouse in Polička
Svoboda, Jan ; Kozáček, Martin (referee) ; Brukner, Bohuslav (advisor)
This bachelor thesis deals with the processing of project documentation for a new building called VillaHouse. The building is located in the southeastern part of the City of Polička. This is a three-story apartment building with a flat roof. The building has main and side entrances. The main entrance to the building is wheelchair accessible. The first floor has been designed with storage areas as well as a staircase and vestibule. The second and third floors are designed with 6 separate apartments. The apartments are of different size categories (2 + 1, 3 + 1, 1 + kc, 2 + kc and 2 x 3 + kc). The building has sheltered parking for 6 cars. The footings of the building are made of plain concrete. The supporting and perimeter walls are made from ceramic blocks. The ceiling constructions are made of prestressed reinforced concrete panels SPIROLL. The external walls are insulated with contact insulation ETICS.
|
|
|
Family house
Vlček, Petr ; Bielesch, Petr (referee) ; Bečkovský, David (advisor)
The aim of my bachelor's thesis is a design of family house. The building is designed as two-story wooden frame building without cellar and with gable roof and garage with mono-pitched roof. The garage is proposed as a part of the house. Five bedrooms layout fulfills the requirements for four family members. The entrance of the house is situated on the southwest part. There is a relatively wide hallway located at entrance, with wooden staircase and entrance of study room, living room with kitchenette, utility room and bathroom with toilet. The top floor includes the hallway again, with entrance to bedroom, two rooms for kids, clothes room, bathroom and toilet. The rooms are for children and they are situated on the sunny side of the house. The garage is for single car and there is bicycles storage behind it. The construction of the house is wooden frame of KVH prism. The roof covering supports roof truss with modern sliding collar.
|
|
|
Implementation of finishing works - Office building in Kolín
Pospíšilová, Izabela ; Liška, Pavel (referee) ; Nečasová, Barbora (advisor)
This bachelor‘s thesis deals with technological stage of finishig works of office building in Kolín – Zálabí. Especially, I focused on implementation of interior plaster different technologies and comparsion using Build Power S and Contec. Also, the thesis deals with the making of plasterboard partition including schemes of their connection. Also mechanical assembly, control and test plans, and safety and health during work are processed for selected building processes. The work also includes construction site.
|
|
|
Implementation of finishing works - Office building in Kolín
Pospíšilová, Izabela ; Liška, Pavel (referee) ; Nečasová, Barbora (advisor)
This bachelor‘s thesis deals with technological stage of finishig works of office building in Kolín – Zálabí. Especially, I focused on implementation of interior plaster different technologies and comparsion using Build Power S and Contec. Also, the thesis deals with the making of plasterboard partition including schemes of their connection. Also mechanical assembly, control and test plans, and safety and health during work are processed for selected building processes. The work also includes construction site.
|
|
|
Family house
Vlček, Petr ; Bielesch, Petr (referee) ; Bečkovský, David (advisor)
The aim of my bachelor's thesis is a design of family house. The building is designed as two-story wooden frame building without cellar and with gable roof and garage with mono-pitched roof. The garage is proposed as a part of the house. Five bedrooms layout fulfills the requirements for four family members. The entrance of the house is situated on the southwest part. There is a relatively wide hallway located at entrance, with wooden staircase and entrance of study room, living room with kitchenette, utility room and bathroom with toilet. The top floor includes the hallway again, with entrance to bedroom, two rooms for kids, clothes room, bathroom and toilet. The rooms are for children and they are situated on the sunny side of the house. The garage is for single car and there is bicycles storage behind it. The construction of the house is wooden frame of KVH prism. The roof covering supports roof truss with modern sliding collar.
|
|
|
The villahouse in Polička
Svoboda, Jan ; Kozáček, Martin (referee) ; Brukner, Bohuslav (advisor)
This bachelor thesis deals with the processing of project documentation for a new building called VillaHouse. The building is located in the southeastern part of the City of Polička. This is a three-story apartment building with a flat roof. The building has main and side entrances. The main entrance to the building is wheelchair accessible. The first floor has been designed with storage areas as well as a staircase and vestibule. The second and third floors are designed with 6 separate apartments. The apartments are of different size categories (2 + 1, 3 + 1, 1 + kc, 2 + kc and 2 x 3 + kc). The building has sheltered parking for 6 cars. The footings of the building are made of plain concrete. The supporting and perimeter walls are made from ceramic blocks. The ceiling constructions are made of prestressed reinforced concrete panels SPIROLL. The external walls are insulated with contact insulation ETICS.
|
|
|
Family house
Fendrich, Lukáš ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
The content of this thesis is the construction of a detached house in the Moravany village near the city of Brno. This is a house with two floors and a basement. The house is a self-contained housing unit, and is designed for 2 persons (2 children, 2 adults) for long-term accommodation. The main load-bearing walls are made of structural system Ytong and Prefa for underground walls. The non-supported walls in the basement are made of autoclaved aerated concrete, the rest of non-supported walls are made of plasterboard in the floors. The ceilings are made up of Ytong beams and autoclaved aerated concrete inserts, cast-concrete layer, forming reinforced concrete beamed ceiling. The roof is sloped, gabled, created by the construction of timber truss, purlin system.
|
guest ::
