|
|
Separation of lipids from cell tissues
Kotland, Vojtěch ; Lacina,, Lubor (referee) ; Svěrák, Tomáš (advisor)
This master’s thesis is focused on lipid separation from tissue cells. Thesis is divided into theoretical and experimental part. In the theoretical part is summarized current knowledge about lipids, their properties and methods used to separate them from tissue cells. Those methods were compared and one of them was chosen to be used in the experimental part. Theoretical part is ended with reviews aimed towards the research in this area of chemistry. Experimental part describes factors affecting chosen method of lipid separation from tissue cells. The measurements were chosen so that they could be easily reproduced. Values for each factor were experimentally determined to increase the amount of fat separated. All factors were compared and based on their summarization the optimization for whole method was produced.
|
|
| |
|
|
Electrolytes containing a phosphorus-based flame retardant
Pelikán, Ondřej ; Libich, Jiří (referee) ; Máca, Josef (advisor)
The diploma thesis is focused on the theoretical knowledge of lithium accumulators. More attention is given to electrolytes and especially to flame retardants, where the types and individual examples of flame retardants are described more detailed. The practical part is focused on the individual laboratory measurement of selected samples of electrolytes with different flame retardants. The measurement results are analyzed in other parts.
|
|
|
PLA Synthesis in Solution
Svítil, Jan ; Zdeněk, Přikryl (referee) ; Petrůj, Jaroslav (advisor)
This thesis is studying PLA syntheses using polymerization of lactides in solution. Theoretical part deals with properties and production of lactic acid, lactides and polylactides. In the experimental part, possibilities of lactides polymerization in solution has been summerised and verified. Syntheses were performed via “solvothermal” method using 7 solvents (toluene, chloroforme, 1,2-chlorobenzene, acetone, tetrahydrofurane, cyclohexane and hexane). Using hexane as solvent, at concentration ratio catalyzer/lactide 1 : 1 000, polymerization temperature 160 °C and reaction time 20 h, polylactide of viscosity average molecular weight 179 000 gmol–1 was synthetized from the lactide.
|
|
|
Catalytic oxidation of VOC on commercially available catalysts
Osička, Tomáš ; Jecha, David (referee) ; Brummer, Vladimír (advisor)
The main topic of this thesis is a catalytic oxidation which belongs to a group of modern technologies for removing emission of CO and VOC from waste air. In the introduction of this thesis, the basic concepts are defined. Further the legislative requirements associated with VOC emissions, emission limits and conditions are summarized. Described destructive and non-destructive methods for removing VOCs from waste gases are also briefly described. Increased attention is paid to the catalytic oxidation as the main theme of the thesis. It was searched for industrial applications where the catalytic oxidation is used. Another chapter is devoted to the theoretical analysis of kinetics of catalytic oxidation reactions. Firstly, the basic types of reactors are described and also material balance and reaction rate for the isothermal and adiabatic reactor. In the experimental part results of performed kinetic measurements on a pilot unit for catalytic commonly used organic solvents (VOCs) using commercially available catalysts were summarized. Pre-exponential factors and activation energies for sprinkling catalysts EnviCat VOC-5565 and EnviCat 55068 for substances ethanol, toluene and acetone were determined. "Light-off" curves for these substances and methane were measured and on sprinkled catalyst EnviCat 55068 and on monolithic catalyst Purelyst PH-304.
|
|
|
Separation of lipids from cell tissues
Kotland, Vojtěch ; Lacina,, Lubor (referee) ; Svěrák, Tomáš (advisor)
This master’s thesis is focused on lipid separation from tissue cells. Thesis is divided into theoretical and experimental part. In the theoretical part is summarized current knowledge about lipids, their properties and methods used to separate them from tissue cells. Those methods were compared and one of them was chosen to be used in the experimental part. Theoretical part is ended with reviews aimed towards the research in this area of chemistry. Experimental part describes factors affecting chosen method of lipid separation from tissue cells. The measurements were chosen so that they could be easily reproduced. Values for each factor were experimentally determined to increase the amount of fat separated. All factors were compared and based on their summarization the optimization for whole method was produced.
|
|
|
Electrolytes containing a phosphorus-based flame retardant
Pelikán, Ondřej ; Libich, Jiří (referee) ; Máca, Josef (advisor)
The diploma thesis is focused on the theoretical knowledge of lithium accumulators. More attention is given to electrolytes and especially to flame retardants, where the types and individual examples of flame retardants are described more detailed. The practical part is focused on the individual laboratory measurement of selected samples of electrolytes with different flame retardants. The measurement results are analyzed in other parts.
|
|
|
PLA Synthesis in Solution
Svítil, Jan ; Zdeněk, Přikryl (referee) ; Petrůj, Jaroslav (advisor)
This thesis is studying PLA syntheses using polymerization of lactides in solution. Theoretical part deals with properties and production of lactic acid, lactides and polylactides. In the experimental part, possibilities of lactides polymerization in solution has been summerised and verified. Syntheses were performed via “solvothermal” method using 7 solvents (toluene, chloroforme, 1,2-chlorobenzene, acetone, tetrahydrofurane, cyclohexane and hexane). Using hexane as solvent, at concentration ratio catalyzer/lactide 1 : 1 000, polymerization temperature 160 °C and reaction time 20 h, polylactide of viscosity average molecular weight 179 000 gmol–1 was synthetized from the lactide.
|
|
|
Catalytic oxidation of VOC on commercially available catalysts
Osička, Tomáš ; Jecha, David (referee) ; Brummer, Vladimír (advisor)
The main topic of this thesis is a catalytic oxidation which belongs to a group of modern technologies for removing emission of CO and VOC from waste air. In the introduction of this thesis, the basic concepts are defined. Further the legislative requirements associated with VOC emissions, emission limits and conditions are summarized. Described destructive and non-destructive methods for removing VOCs from waste gases are also briefly described. Increased attention is paid to the catalytic oxidation as the main theme of the thesis. It was searched for industrial applications where the catalytic oxidation is used. Another chapter is devoted to the theoretical analysis of kinetics of catalytic oxidation reactions. Firstly, the basic types of reactors are described and also material balance and reaction rate for the isothermal and adiabatic reactor. In the experimental part results of performed kinetic measurements on a pilot unit for catalytic commonly used organic solvents (VOCs) using commercially available catalysts were summarized. Pre-exponential factors and activation energies for sprinkling catalysts EnviCat VOC-5565 and EnviCat 55068 for substances ethanol, toluene and acetone were determined. "Light-off" curves for these substances and methane were measured and on sprinkled catalyst EnviCat 55068 and on monolithic catalyst Purelyst PH-304.
|
|
| |
guest ::
