|
| |
|
|
Emissions of solid pollutants
Strnad, Ondřej ; Lisá, Hana (referee) ; Baláš, Marek (advisor)
The thesis deals with issue and properties of solid particles of anthropogenic origin. It describes the principles and technologies for removing them from the flue gas flow and avoid-ing leakage into the atmosphere. It focuses on types of separators, especially mechanical sepa-rators. The work includes an experimental part involving obtaining data characterizing the cyclone separator.
|
|
|
Verification of emission class of solid fuel boilers
Skoupý, Jan ; Štelcl, Otakar (referee) ; Baláš, Marek (advisor)
This thesis is focused on verifying of emission class of solid fuel boilers. The boilers are described from principle of combustion process in the beginning. The second part divide and describe solid fuels which are intended to burn in these boilers. The third part deals with requirements of legislation of the Czech Republic and European Union. The last part verifies this requirements on the selected solid fuel boiler.
|
|
|
Assessment of the design of the new solution sliding contact in electrical machines
Záhejský, Petr ; Mach, Martin (referee) ; Veselka, František (advisor)
The thesis is devoted to assessing the concept of a new solution to the sliding contact in electrical machines. The work is focused mainly on the issue of collector engines, which are almost exclusively used in electric hand tools. Much of the work is devoted to angle grinders, which are usually used in extreme conditions and demands for seamless operation are enormous. In order partial insight into the problems in the introduction are studied phenomena acting on the sliding contact, wear and durability. Then further materials and diagnostic methods for increasing the transfer efficiency brush - commutator brush - ring. The following sections of this thesis is also considered a proposal innovated brush along with the practical verification and evaluation of the suitability of the use of innovative sliding contact.
|
|
|
Design of a filter unit for waste gas cleaning
Volánka, Lukáš ; Wegschmied, Roman (referee) ; Jecha, David (advisor)
This bachelor's thesis focuses on the design of the filtration unit and on particulate matter, or PM, which is still a significant contributor to air pollution. The first chapter describes the basic properties of these pollutants and their influence on the design of the separator. The next chapter briefly discusses the current legislation in the Czech Republic dealing with emission and air pollution limits. In the third chapter, which is also the last of the theoretical part of the thesis, the individual methods of removal of PMs are presented and explained. The practical part follows, mainly devoted to the design of the filtration unit for the given case, which ends with the measurement of emissions and a brief evaluation of the results.
|
|
|
Temperature and humidity measuring station for Ionmeter
Kadaňka, Karel ; Roubal, Zdeněk (referee) ; Szabó, Zoltán (advisor)
This bachelor’s thesis describes the design of meteorological station of Ionmeter. Meteorological station is controlled by the Arduino platform, which evaluates the measured data and sends them wireless into the initial concept of Ionmeter. In the first part, the particular measured variables (temperature, humidity, pressure, carbon dioxide concentration, UV radiation and amount of dust particles) are described. It also describes the brief principle of the formation of air ions and their influence of the human organism. The following chapters are dedicated to the description of each component, the description of the weather station program and the initial concept of Ionmeter. The last chapter describes the construction of the meteorological station itself.
|
|
|
Optimization of method for evaluation ETICS dirtiness
Gabriel, Jindřich ; Žák,, Antonín (referee) ; Žižková, Nikol (advisor)
This diploma thesis deals with the issue of adhesion of pollution to the final surface treatments of the ETICS system. The theoretical part deals with important factors and processes that affect the degree of adhesion of pollution. The practical part of the diploma thesis follows the diploma thesis of Ing. Jakub Krejčík. Optimization of test methods for simulation of artificial pollution on tested samples was proposed. These samples were then evaluated in the laboratory and also compared with plasters that were exposed to real pollution from the natural environment.
|
|
| |
|
|
Separation of solid particles from biomass burning
Štěpánek, Petr ; Baláš, Marek (referee) ; Pospíšil, Jiří (advisor)
This thesis deals with aspects of the dust particles which occur in gaseous products from biomass combustion. The thesis introduces technologies by which solid particles capture from a combustion flow can be implemented. Principles and technical means of dust particles separation in mechanical separators are put in focus primarily. The thesis is concluded with a technical design of a cyclone separator.
|
|
|
Optimization of method for evaluation ETICS dirtiness
Gabriel, Jindřich ; Žák,, Antonín (referee) ; Žižková, Nikol (advisor)
This diploma thesis deals with the issue of adhesion of pollution to the final surface treatments of the ETICS system. The theoretical part deals with important factors and processes that affect the degree of adhesion of pollution. The practical part of the diploma thesis follows the diploma thesis of Ing. Jakub Krejčík. Optimization of test methods for simulation of artificial pollution on tested samples was proposed. These samples were then evaluated in the laboratory and also compared with plasters that were exposed to real pollution from the natural environment.
|
guest ::
