|
|
Additional reinforcement of wood elements
Janoušek, Radek ; Vejpustek,, Zdeněk (referee) ; Vaněrek, Jan (advisor)
This diploma thesis deals with the possibilities of additional reinforcement of wooden elements using different types of BFRP materials. In the practical part, an experiment of reinforcing plywood with external reinforcement using BFRP fabrics with different basis weights was performed. As part of the strength tests performed, the specimens were subjected to bending and shear stresses. To verify the bonding quality of the plywood, the bodies were exposed to the effect of elevated temperature and a delamination test was performed to determine the bonding quality of the plywood joints. The achieved values were evaluated and compared with the available literature.
|
|
|
Development of wood-based board materials applying thermal modification process
Buriánek, Vlastimil ; Pipíška,, Tomáš (referee) ; Vaněrek, Jan (advisor)
This diploma thesis deals deals with the effectiveness of polyurethane and phenol-resorcinol-formaldehyde adhesives when applied in bonded joints of thermally treated sheet materials. The thermal resistance of commercially used adhesives was analysed as part of a research activity. Furthermore, the changes in the properties of wood materials after heat treatment were described. In the practical part, the effectiveness of the used adhesives on densified birch plywood was verified with respect to the shear strength of the resulting composite. Based on the results obtained, it was proceeded to verify the effectiveness of densification on spruce plywood.
|
|
|
The study of adhesion of glued balistic composites on the dependence of materials used.
Dobiáš, Jiří ; Másilko, Jiří (referee) ; Šiler, Pavel (advisor)
The aim of this work was to investigate the properties of bonded ballistic materialsBalistic composites are mainly glued to reduce weight while keeping their protective properties. On this basis, the materials used were ballistic steel, ceramics, rubber kevlar, non-gummed kevlar, Dyneema and fiberglass. For bonding used were a one-component adhesive Collano 36.104 and two-component adhesive Biresin U1305. The strength of the joint was measured in shear at tensile loads. From these results, deformation energy was further calculated.
|
|
|
Additional reinforcement of wood elements
Janoušek, Radek ; Vejpustek,, Zdeněk (referee) ; Vaněrek, Jan (advisor)
This diploma thesis deals with the possibilities of additional reinforcement of wooden elements using different types of BFRP materials. In the practical part, an experiment of reinforcing plywood with external reinforcement using BFRP fabrics with different basis weights was performed. As part of the strength tests performed, the specimens were subjected to bending and shear stresses. To verify the bonding quality of the plywood, the bodies were exposed to the effect of elevated temperature and a delamination test was performed to determine the bonding quality of the plywood joints. The achieved values were evaluated and compared with the available literature.
|
|
|
Vývoj zkušební metody pro ověření pevnosti lepeného spoje ve smyku pro velkoformátové masivní panely
Jemelík, Vojtěch
The aim of the thesis is to develop and verify a test method for the verification of shear compressive strength of wall panels manufactured by Novatop company. Strength verification of adhesive joints in order to perform tests prescribed by the European Technical Assessment in the current company's test room. First, it is necessary to analyse the stress which occurs in the wall of the timber wooden building. Furthermore, it is necessary to design the test methods in such way so that they can be carried out in the company's test room and to introduce the tests in business practice.
|
|
|
The study of adhesion of glued balistic composites on the dependence of materials used.
Dobiáš, Jiří ; Másilko, Jiří (referee) ; Šiler, Pavel (advisor)
The aim of this work was to investigate the properties of bonded ballistic materialsBalistic composites are mainly glued to reduce weight while keeping their protective properties. On this basis, the materials used were ballistic steel, ceramics, rubber kevlar, non-gummed kevlar, Dyneema and fiberglass. For bonding used were a one-component adhesive Collano 36.104 and two-component adhesive Biresin U1305. The strength of the joint was measured in shear at tensile loads. From these results, deformation energy was further calculated.
|
|
|
Properties of adhesive bonds filled with microparticle fillers
Habrová, Karolína ; Valášek, Petr (advisor) ; Müller, Miroslav (referee)
This thesis deals with the measuring of adhesive and cohesive characteristics of composite systems filled with microparticles of glass powder.
The theoretical part describes in detail composites from their historical development
to the present, also their characteristics, general properties, distribution and types of fibers
and matrices. Emphasis is placed on composites filled with particulate filler and current researches in the field of composites with glass filler. Furthermore, the adhesion and cohesion of filled systems is described.
The experimental part of this thesis includes a methodology, which describes in detail
the used materials, methods of preparation of mechanical testing and statistical analysis. The results of mechanical tests for all three composite mixtures and evaluation of cost savings are appended to this thesis.
|
|
| |
guest ::
