|
|
Reconstruction of barn as a part of Miroslavské Knínice castle
Martínek, David ; Bažant, Zdeněk (referee) ; Strnad, Jiří (advisor)
The bachelor thesis deals with the reconstruction of a barn in Miroslavské Knínice. First, it was necessary to examine the conditions of the barn. Crumbling masonry and cracks in perimeter walls had been found, so it was necessary to create a design and assess new solutions to repair the barn. On the basis of these defects, it was proposed to pull down a half of the barn, including the foundations and proposed to lay concrete over this part of formwork together with reinforcement.
|
|
|
New building of nursery school
Juračková, Pavla ; Ing.Radek Sedlák (referee) ; Benešová, Romana (advisor)
This master´s thesis is focused on suitable design of a new nursery school building. Nursery school is situated in suburban area, and as such two level design was chosen. The building has U shape outline. Ground floor is intended for basic operation of the nursery school, while the second floor is designed to accommodate various extra-curricular activities. Foundations of the building are made of plain concrete. Porotherm system is used for all walling. Ceilings are made of precast hollow core slabs - Spiroll. Object is covered with a flat roof.
|
|
|
Atrial House in Modern Development
Šantavá, Žaneta ; Janíček, Vít (referee) ; Králová, Zuzana (advisor)
The subject of my thesis is the preparation of project documentation for the construction of an atrium building in modern buildings in the village Spojil street on the Okružní 116/1. A typical char will be the atrium, which will be adjacent residential areas, while in the peripheral walls of the minimum window for privacy for their residents. The building is without a basement, with single-storey flat roof. The base structure is designed from the blocks and shuttering Best of strip footings of plain concrete. The outer and inner walls of the bricks POROTHERM Profi DRYFIX. The house is designed as a single-member family for 4-5 personers. Project drawings were created in ArchiCAD 15 student version and visualization program Sketchup 7.
|
|
|
Alemat s.r.o. headquarters and warehouse
Petr, Lukáš ; Neužil, Jiří (referee) ; Müller, Jan (advisor)
This diploma thesis deals with design of office building with warehouse. The buildings are situated on slightly sloping terrain in cadastre unit of Sudoměřice u Tábora. Both buildings have rectangular shape and are connected with two sides. The Alemat s.r.o. company is internet shop, predominately with electronics. In the office building is also showroom where are some products will be shown. The warehouse will serve for receipt and issue of goods and to store them. The perimeter walls of office building is designed from ceramic block thickness of 250mm, for example Heluz Family 25. The walls will be insulated with 200mm of expanded polystyrene. The foundation construction is designed as foundation strips from plain concrete and permanent formwork brick filled with concrete and reinforced with steel. The ceiling construction is designed as prestressed panels thickness of 250mm. The roof is flat with main hydro isolation made of plasticized PVC foil loaded with pea gravel. The main construction of warehouse will be made of steel frames. The exterior skin of the warehouse will form panels Kingspan thickness of 140mm. The foundation construction is designed as monolithic foundation pads. Between the pads will be monolith grade beams. The roof is designed also from Kingspan panels. To the panel will be mechanically fastened plasticized PVC foil. Roof drainage is designed to rain gutters.
|
|
|
Outdoor swimming pool in Hradec Kralove - Implementation of a peripheral cladding
Špalková, Martina ; Šlanhof, Jiří (referee) ; Mohapl, Martin (advisor)
The bachelor thesis deals with the technological stage of implementing a peripheral cladding in an outdoor swimming pool in Hradec Kralove. It consists of infill masonry made of lightweight bricks in reinforced concrete, skeleton system, plastering and wooden cladding on the construction. This thesis includes the statement, assessment, bill, technological regulation, time schedule, principles of organization of the construction, comparison and evaluation of construction mechanization.
|
|
|
Family house
Nejedlý, Adam ; Svobodová, Sylvia (referee) ; Matějka, Libor (advisor)
This bachelor thesis is focused on a design of a single-family house suitable for four to five permanent residents. The object is situated on an almost flat-surfaced lot on Růžičkova street in Třebíč. The house has two above ground floors and one underground floor. Plan dimensions of the house are 15,85 x 11,85 m. A garage for single vehicle is a part of the building. The roof is constructed as a single flat roof. The object is designed using a technology of Porotherm system except from the basement perimeter walls made of concrete blocks. The thesis also provides a project documentation for a construction including five constructional details, fire safety, thermal engineering, and acoustic solutions. The project documentation had been elaborated in an educational version of ArchiCAD program.
|
|
|
Alemat s.r.o. headquarters and warehouse
Petr, Lukáš ; Neužil, Jiří (referee) ; Müller, Jan (advisor)
This diploma thesis deals with design of office building with warehouse. The buildings are situated on slightly sloping terrain in cadastre unit of Sudoměřice u Tábora. Both buildings have rectangular shape and are connected with two sides. The Alemat s.r.o. company is internet shop, predominately with electronics. In the office building is also showroom where are some products will be shown. The warehouse will serve for receipt and issue of goods and to store them. The perimeter walls of office building is designed from ceramic block thickness of 250mm, for example Heluz Family 25. The walls will be insulated with 200mm of expanded polystyrene. The foundation construction is designed as foundation strips from plain concrete and permanent formwork brick filled with concrete and reinforced with steel. The ceiling construction is designed as prestressed panels thickness of 250mm. The roof is flat with main hydro isolation made of plasticized PVC foil loaded with pea gravel. The main construction of warehouse will be made of steel frames. The exterior skin of the warehouse will form panels Kingspan thickness of 140mm. The foundation construction is designed as monolithic foundation pads. Between the pads will be monolith grade beams. The roof is designed also from Kingspan panels. To the panel will be mechanically fastened plasticized PVC foil. Roof drainage is designed to rain gutters.
|
|
|
Reconstruction of barn as a part of Miroslavské Knínice castle
Martínek, David ; Bažant, Zdeněk (referee) ; Strnad, Jiří (advisor)
The bachelor thesis deals with the reconstruction of a barn in Miroslavské Knínice. First, it was necessary to examine the conditions of the barn. Crumbling masonry and cracks in perimeter walls had been found, so it was necessary to create a design and assess new solutions to repair the barn. On the basis of these defects, it was proposed to pull down a half of the barn, including the foundations and proposed to lay concrete over this part of formwork together with reinforcement.
|
|
|
New building of nursery school
Juračková, Pavla ; Ing.Radek Sedlák (referee) ; Benešová, Romana (advisor)
This master´s thesis is focused on suitable design of a new nursery school building. Nursery school is situated in suburban area, and as such two level design was chosen. The building has U shape outline. Ground floor is intended for basic operation of the nursery school, while the second floor is designed to accommodate various extra-curricular activities. Foundations of the building are made of plain concrete. Porotherm system is used for all walling. Ceilings are made of precast hollow core slabs - Spiroll. Object is covered with a flat roof.
|
|
|
Family house
Nejedlý, Adam ; Svobodová, Sylvia (referee) ; Matějka, Libor (advisor)
This bachelor thesis is focused on a design of a single-family house suitable for four to five permanent residents. The object is situated on an almost flat-surfaced lot on Růžičkova street in Třebíč. The house has two above ground floors and one underground floor. Plan dimensions of the house are 15,85 x 11,85 m. A garage for single vehicle is a part of the building. The roof is constructed as a single flat roof. The object is designed using a technology of Porotherm system except from the basement perimeter walls made of concrete blocks. The thesis also provides a project documentation for a construction including five constructional details, fire safety, thermal engineering, and acoustic solutions. The project documentation had been elaborated in an educational version of ArchiCAD program.
|
guest ::
