|
|
Inhalers and nebulizers for medical use: their principles, reliability, and operating parameters
Mišík, Ondrej ; Tuhovčák, Ján (referee) ; Lízal, František (advisor)
An issue of inhalation therapy is a complex topic, actively discussed in last decades, and its progress in various scientific fields is more than required. First part of this thesis brings a theoretical introduction into principles of aerosol therapy and into the requirements resulting from them. Commonly available technologies of inhalers and nebulisers for medical usage, parameters that determinate their effectivity are briefly described. Usage mistakes influencing the effectivity of inhalation are discussed, as well. Second part deals with experimental measurements of aerosol that selected inhalers generate. It also describes difficulties connected with the methods of these measurements, with sampling and following analyses. Gained results are compared with an available literature.
|
|
|
Bulk properties of fine particulate solids as the function of the selected material parameters.
Slanina, Ondřej ; Roman,, Fekete (referee) ; Svěrák, Tomáš (advisor)
The theoretical part of the thesis focuses on the description of particulate materials and their mechanical behaviors with a focus on flow properties. Great emphasis is placed on measuring the shear properties using a Jenike shear machine, on the correct procedure for standardized measurement and evaluation using Mohr's circles. The theoretical part focuses on the characterization of particulate matter using a variety of methods available, such as visual, separation, sedimentation, surface methods and methods of scanning field and flow. The practical part is focused on the determination of flow characteristics and surface finishing of finely ground limestone Omyacarb VA with various grain sizes. The surface was modified using stearic acid and calcium stearate. Attention was paid to the influence of the concentration of surface-regulating substances on the flowability of the material. The flowability of commercially supplied material was compared with lab modified materials and the determination of the theoretical content of stearic acid or calcium stearate was accomplished. Shear properties were measured using the Jenike shear machine. The material was further tested by laser diffraction and SEM with EDS particle surface analysis and elemental surface mapping.
|
|
| |
|
|
The study of polymorphism and optimization of active pharmaceutical ingredients crystallisation
Novák, David ; Ing.Ladislav Cvak, Ph.D. (referee) ; Ing.Roman Gabriel (advisor)
Active pharmaceutical ingredients (APIs) are frequently delivered to the patient in the solid-state as part of an approved dosage form (tablets, capsules, etc.). Understanding and controlling the solid-state chemistry of APIs is therefore an important aspect of the drug development process. APIs can exist in a variety of distinct solid forms, including polymorphs, solvates, hydrates, co-crystals and amorphous solids. Each form displays unique physicochemical properties that can profoundly influence the bioavailability, manufacturability, stability and other performance characteristics of the drug. Most APIs are purified and isolated by crystallisation from an appropriate solvent during the final step in synthetic process. The main objective of a crystallisation process is to produce crystals with desired properties such as particle size distribution (PSD), shape and purity. All pharmaceutical dosage forms must be produced in uniform units, and good content of uniformity is only possible when the size of the active component is carefully controlled. For on-line control of crystallisations of Quetiapine Fumarate to achieve desired PSD and no changed physicochemical purity was used the Lasentec Focus Beam Reflectance Measurement (FBRM) system.
|
|
| |
|
|
The Influence of Fines on Pore System of Concrete
Elfmarková, Veronika ; Smolka, Hynek (referee) ; Hela, Rudolf (advisor)
Literature does not provide a satisfactory answer to maximum and minimum particle size or the particle size of the mortar phase especially for optimal porosity of concrete. To overcome the shortcomings of the design methods were thought to design a new method for design of concrete mix. This idea is based on a complex analysis of powder materials (determination of granular properties, shape factor of fillers, porosity, packing of powder materials, surface area, etc.) and subsequently to assess the influence to pore system of concrete and physical and mechanical properties in hardened state of concrete. In this work are presented and analyzed two types of fillers – fly ash and limestone dust.
|
|
|
Formation and transformation of atmospheric aerosol in boundary layer
Holubová Šmejkalová, Adéla
Title: Formation and transformation of atmospheric aerosol in boundary layer Author: Mgr. Adéla Holubová Šmejkalová Institute: Institute for Environmental Studies Supervisor: Ing. Vladimír Ždímal, Dr., Institute of Chemical Process Fundamen- tals of the CAS Training workplace: Institute of Chemical Process Fundamentals of the CAS Abstract: The experimental measurement of aerosol clusters from 1.17 nm in size was carried out from August 2016 till December 2018 at the National Atmospheric Observatory Košetice. Atmospheric conditions leading to aerosol clusters stabili- zation, fresh particles formation and particle growth were analyzed. Data of days with no new particle formation confrmed the connection between mixing layer height development and decrease of total aerosol number concentration together with lower gaseous pollutant concentrations. On the contrary, new particle for- mation process overcomes dilution of the atmosphere by increasing the number of freshly nucleated particles. Only decreasing gaseous pollutant concentrations were observed during these events. The atmospheric boundary layer was high du- ring new particle formation events that can mean enrichment of the atmosphere by other components transported by long-range transport or some transfer from the free troposphere. The measurement in...
|
|
|
A detailed study on aerosol particle size distribution in indoor and outdoor environments with attention to ammonium nitrate transormations
Talbot, Nicholas Philip ; Ždímal, Vladimír (advisor) ; Hovorka, Jan (referee) ; Vojtíšek, Michal (referee)
Due to its prevalence over large, densely populated areas, ammonium nitrate is an important chemical species in aerosol research. However, due to its volatility at ambient temperatures and over low temperature gradients, ammonium nitrate can be a difficult species to accurately measure. The volatility of ammonium nitrate is known to be dependent on temperature, relative humidity, the internal mixing state of the particle, and availability of the precursor gas constituents. The particle's physical state affects the equilibrium constant value of the ammonium nitrate - nitric acid / ammonia exchange and helps determine the dissociation rate. For indoor aerosol research, the outdoor originating aerosol particles' exposure to the new physical conditions indoors, such as changes in temperature, humidity, and particle-surface reactions within the microenvironment all accelerate ammonium nitrate dissociation. This increased rate of partitioning can generate artifacts on datasets, increase indoor particle formation, and accelerate the corrosion of cultural antiquities through acidification. The magnitude of these impacts is uncertain due to the current lack of knowledge on particle transformation processes when outdoor originating particles migrate indoors. To address this gap in knowledge, this thesis...
|
|
|
Formation and transformation of atmospheric aerosol in boundary layer
Holubová Šmejkalová, Adéla ; Ždímal, Vladimír (advisor) ; Řezáčová, Daniela (referee) ; Hrubý, Jan (referee)
Title: Formation and transformation of atmospheric aerosol in boundary layer Author: Mgr. Adéla Holubová Šmejkalová Institute: Institute for Environmental Studies Supervisor: Ing. Vladimír Ždímal, Dr., Institute of Chemical Process Fundamen- tals of the CAS Training workplace: Institute of Chemical Process Fundamentals of the CAS Abstract: The experimental measurement of aerosol clusters from 1.17 nm in size was carried out from August 2016 till December 2018 at the National Atmospheric Observatory Košetice. Atmospheric conditions leading to aerosol clusters stabili- zation, fresh particles formation and particle growth were analyzed. Data of days with no new particle formation confrmed the connection between mixing layer height development and decrease of total aerosol number concentration together with lower gaseous pollutant concentrations. On the contrary, new particle for- mation process overcomes dilution of the atmosphere by increasing the number of freshly nucleated particles. Only decreasing gaseous pollutant concentrations were observed during these events. The atmospheric boundary layer was high du- ring new particle formation events that can mean enrichment of the atmosphere by other components transported by long-range transport or some transfer from the free troposphere. The measurement in...
|
|
|
Inhalers and nebulizers for medical use: their principles, reliability, and operating parameters
Mišík, Ondrej ; Tuhovčák, Ján (referee) ; Lízal, František (advisor)
An issue of inhalation therapy is a complex topic, actively discussed in last decades, and its progress in various scientific fields is more than required. First part of this thesis brings a theoretical introduction into principles of aerosol therapy and into the requirements resulting from them. Commonly available technologies of inhalers and nebulisers for medical usage, parameters that determinate their effectivity are briefly described. Usage mistakes influencing the effectivity of inhalation are discussed, as well. Second part deals with experimental measurements of aerosol that selected inhalers generate. It also describes difficulties connected with the methods of these measurements, with sampling and following analyses. Gained results are compared with an available literature.
|
guest ::
